Scrapping Massive Pile Of Aluminum Lights From Orlando Pt. 2

In todays video I finish processing the lights from Orlando . Thanks for watching! #recycling #scrapping #scrap #copperwire #aluminum #diy #projectshopfl #copperking #led #ledlights #lighting
Support the channel by subscribing: / @projectshopfl
Music: Mixkit.co
Bensound.com

[@joeyallen7927]

You are the scrapping master. I have learn a lot watching your channel.

[@ProjectShopFl]

Thanks!

[@scrapitjc]

Getting t8me to rebuild the Copper King.She has made you some money.. time fir some luv. Thanks for the video.

[@ProjectShopFl]

Thanks, I have some cool mods coming for it.

[@joshp6061]

Good choice of Estwing for your hammer

[@ProjectShopFl]

They are the best for sure! 👊👍

[@GeorgeRichardson-cv4xz]

The copper king reminds me of my wife old and sloppy works hard but I still love her!lol

[@ProjectShopFl]

😂😂😂

[@danielandrus2637]

Ok I'm waiting for this crooked cop story to come out. You've built up the suspense, dish.

[@ProjectShopFl]

Haha, I got a full vid coming on it.

[@neeleydev2596]

I cant wait either

[@cijil169]

It's all the same. Companies use a color for computer data, another for security systems etc. The orange however, seems to fit your motif.

[@ProjectShopFl]

Thanks, I kinda liked the orange. lol I kept most of it and scraped some.

[@MatthewK863]

Transformers... More than meets the eye!!

[@ProjectShopFl]

👍👍

[@randydobson1863]

hello project shop fl it's is randy and i like yours video is cool thanks friends randy

[@ProjectShopFl]

Thanks for watching Randy.

[@mllarson]

The color of network cables doesn't matter; look for the rating printed on the insulation. The higher the number the faster the data rate. Cat 6 is pretty fast, Cat 5E is probably the lowest you'd want to go.

[@ProjectShopFl]

Thanks for the info! 👍👊

[@perstaffanlundgren]

There can also be differences in the cables regarding shielding, there are non shielded / shielding with one shield around all the "pairs"as one unit,and shielding around each "pair " in the cable. A shielded cabel have metal plated connectors. The text on the cable will also say if its shielded or not The shielded cables is less sensitive for electric disturbance /induction from other data cabels and power cabels. One tip is to be careful with network cable do not kink or bend them hard this will make the cable slower for the data.

[@johnkriegelstein4891]

Bro good videos and no bullshit.Thanks for your sharing with us.

[@ProjectShopFl]

Thanks I appreciate you watching & the comment. 👊👍

[@hisandherscoins]

I have been ripping apart microwave I picked up truck full of them I have been crazy busy with everything

[@ProjectShopFl]

Thats, awesome hope you find some copper transformers.

[@gregfridholm2136]

Enjoyed the video. thanks.

[@ProjectShopFl]

Glad you enjoyed the video! 👊👍

[@toddwest8618]

You got some more cool junk to work with that’s awesome Bro

[@ProjectShopFl]

Thanks 👍

[@mdouglaswray]

Great narration. Thanks for all the details!

[@ProjectShopFl]

No problem thanks for watching. 👊

[@bigcountryscrapper6885]

Another awsome video my friend

[@ProjectShopFl]

Thanks!

[@tonylawlor3503]

Reference your last video and this one If your born poor it's not your fault if you die poor it's your fault😊😊

[@ProjectShopFl]

I guess you are right. Thanks for sharing

[@garrettmillard525]

Put a different color little sticker on each transformer for each different light type if uniform. Weed out the double aluminum faster.

[@ProjectShopFl]

It's hard to tell because all the original one usually have been changed many times over the life of the light so over the years the transformers like everything else in the world is made cheeper.

[@markrice3502]

another great video as always thanks for shareing with us ,keep the peace

[@ProjectShopFl]

Thanks, I got lots of good vids coming., 👊👍

[@scrapman502]

Here's a suggestion for your transformer cracking machine. Try welding on thicker stock maybe made of carbon steel so it would be less likely to bend. Maybe as a temporary fix, you can make adapter plates that slip over the ends of the clamp to make the pinch point a little lower so the transformer doesn't slip off the lip on the bottom when you crack it. You could make multiple plates with different size lips for different transformers.

[@ProjectShopFl]

Thanks for the suggestion

[@scrapman502]

I sent you specs on the idea via Email

[@iandrew6347]

Great video Sir watching from the U.K.

[@ProjectShopFl]

Thank you! 👊

[@paulhayden9142]

That's awesome

[@ProjectShopFl]

Thanks! 👍

[@greekgods3399]

love it

[@ProjectShopFl]

Thanks! 👊

[@ThaMazda]

I appreciate you taking the time to show and explain how you do the transformers.

[@ProjectShopFl]

Thanks, I have lots of videos on just the transformers

[@charlespaschal25]

The network cabling should have a rating printed on the wire (Cat 5, Cat 5e, Cat 6, etc.). Cat 6 on better is the stuff to keep, but Cat5e will work in a pinch to give gigabit speeds. Any thing from Cat 3 though Cat 5 is basically scrap.

[@ProjectShopFl]

Ok thanks for the info.

[@charlesyates6687]

You know those 1" tick sheets of steel they use on road construction ? Think your grain can drag one up on the tráiler? There's the best steel for under your press . Need one of those stainless Rolling tables to put your unstripped on so you don't have to bend over 900 times while stripping

[@ProjectShopFl]

I know I am looking in to a back saver.

[@johndaley9188]

Colored CAT wire is just that. Spec wise, can all be the same. Look for any markings on the jacket.

[@ProjectShopFl]

Thanks for the info. 👊👍

[@scrapman502]

Most Computer monitors have a 4" hole pattern. Just make yourself a plate to fit the monitor and then screw the plate to the stand. If the stand is big enough and can handle the weight, it'll work!

[@ProjectShopFl]

Thanks for the info

[@lwcentraltn3447]

Ethernet cable is fine even if wet plastic putting the connectors on is very easy also. Led lighting doesn’t emit as much to mess with Ethernet but some lighting and equipment does. If you run into issues it could be the interference you would need to go with shielded cable. Cat6 though is twisted tighter to help with interference also. The markings on the cable are what matter the coloring is just for preference. Cat5 is just 100mb cat5e 1gig. Cat6 is 1gig. Anything higher your network equipment probably doesn’t support but it will still work at lower speeds such as 1 gig.

[@ProjectShopFl]

Thanks for the info 👍

[@robertlivingstone3947]

all i can say great job and video

[@ProjectShopFl]

Thank you!

[@EVMacD]

I think that first wire run you did, didn’t need to be cut in half. You could just manage it at the infeed in one long spool. Saves all the bending and picking up individual pieces that’s gotta be tough on your back…The 600 amp cable is just too big though.

[@ProjectShopFl]

The only problem with running long paces when stripping by my self is it tangles and is not easy put in a barrel. with 2 people it's not as much of an issue.

[@taunusrunner3767]

:-) also in germany, nobody cares for the paper on nr.2 copper it burns away in the melting process

[@ProjectShopFl]

Right! I don't know why some yards give people problems with it.

[@ryanjohnson8340]

Colored CAT doesn’t mean anything, all that really matters is the cable rating. The different colors are usually used in buildings to represent the different systems. Fire red, security blue, etc.

[@ProjectShopFl]

Thanks for the info. 👍

[@ryanphillips1388]

Some place will pay copper #3 if to much paper

[@ProjectShopFl]

Wow, I never had that problem and I sell to a place that buys from scrap yards.

[@ssweeps]

You might want to buy another trailer.

[@ProjectShopFl]

Hopefully one day soon.

[@nunyabuziness8421]

Damn dude u need a helper. How many hrs a day do u put in?

[@ProjectShopFl]

Depends on the job and I don't work every day so when I do 10-12 hours is nothing for me. lol

[@whiz31]

There really isn't much difference in the cabling color. Only the cable type it's either cat5e or cat6. The only real difference in that is the amount of high-grade metal content such as copper and gold. This allows the cat 6 to carry a higher rate of data. In a home network system this won't matter though because you're only as fast as your slowest connection. It won't matter if you use CAT5 or cat6 cabling for direct connect because both will carry a higher rate than the Internet modem is capable of.

[@ProjectShopFl]

Ok, Thanks for the info.

[@toddwest8618]

Do you make good money on the wire from the transformer?

[@ProjectShopFl]

Yes if it's copper I can triple my money in a very short time.

[@6980869]

Search his channel using the word “transformers”, and you’ll see how he can make basically $100-$1000/hr

[@Dradski1982]

Good Video. These lower dollar jobs keep you fed between the big paydays.

[@ProjectShopFl]

Thanks, Still beats working for someone. lol

[@FaizalKhan-jj6bn]

Bro I am from India plz you tell me how I import big transformer to india

[@ProjectShopFl]

Pay more than the local scrap yards.

[@user-gs7bl7pt7r]

It's great that you explain what you are doing, but you tend to repeat yourself over and over, that makes it slow, try not to repeat yourself so much.

[@ProjectShopFl]

Yea I retarted so it's a wonder I even make a coherent video.

[@pvandewyngaerde]

Video KyvtyYGLDRo looks a lot like your machine

[@ProjectShopFl]

Nice! The blue and yellow one is what mine is.

[@robertabernathy9676]

Where’s your gun. I’m worried about you.

[@ProjectShopFl]

😂😂😂 Don't worry there are 2-3 around always. 💪👊

[@normbarr2894]

please quit talking about what needs to need fixed and show us you can fix somthing

[@ProjectShopFl]

I hear you. I just got some one to edit all my videos so I will have more time for the projects. Making the videos, editing , uploading, & answering ? was taking up all my time

[@joebly5641]

How you gonna talk shit about those cheap Chiwanese welds with how much money it’s made you? 😆 that hunk of crap keeps you the fastest scrapper on youtube ;) the copper king deserves b day cakes made of grease and shinny washers 😆thanks for the videos and entertainment brother

[@ProjectShopFl]

😂😂😂😂 Thanks, I gots some mods coming for the copper king.