All details can be found here: azproperforman... Installing a 5/7 drop onto a '98 Silverado (same basic process as 4/6), as well as brakes and 18" American Racing Torq Thrust wheels.
Пікірлер: 191
@sehtime36014 жыл бұрын
Love the way these are being filmed, all the little mechanic's tricks like putting tension on that ball joint to take the nut off, and the pulling the cotter pin out are things that other videos don't share. Those are the things that you learn from years of being a mechanic and working on cars without realizing it. New comers will appreciate all the tricks you share from years of experience.
@smokeitloudbanks Жыл бұрын
I have the same exact truck same year and color it came with a 4/6 drop had 150k miles best truck I have ever had love it and runs good
@aaronchristoph22983 жыл бұрын
Thanks for the video boys! Helped me a ton in dropping my obs chevy. Good tips and tricks!
@jruiz17244 жыл бұрын
What size tire are you running on those 18’s
@jaredshoemaker91962 ай бұрын
Thanks for sharing. You made is easy to understand the process. Take Care!!!
@obslife19854 жыл бұрын
Tell the c10 kid to start making videos again lol I was wondering what happen to him.
@danielaruta88164 ай бұрын
Very informative video. Consider adding light so everything is easier seen. It’s dark under there!
@artysmotorsports4 жыл бұрын
That actually looks pretty clean 👍
@grandparolie3 жыл бұрын
Perfect stance I love it.
@DrivenbyGears4 жыл бұрын
Very nice 👌don't froget the extra bolt on the shock extenders or they will eventually flex.
@albertybarra79683 жыл бұрын
Extra bolt?
@DrivenbyGears3 жыл бұрын
@@albertybarra7968 there is a bolt in middle
@albertybarra79683 жыл бұрын
@@DrivenbyGears its a small hole not even the same as the 2 big ones
@DrivenbyGears3 жыл бұрын
@@albertybarra7968 I know that I've installed these shoot look at my channel for God sakes
@DrivenbyGears3 жыл бұрын
@@albertybarra7968 www.carid.com/belltech/1994-chevy-ck-pickup-suspension-systems/belltech-shock-extension-kit-3451150504.html?relationshipId=3811920394&childId=3451150505&offermpnid=1435816&view=040242&gclid=CjwKCAiAxKv_BRBdEiwAyd40NzOfKOnj6VzpLwqW7tTwQdwOrlXtncpa7jcHDqXsKo9jeHZ4PDmJlhoCNB0QAvD_BwE here you go look at this. See the hardware.
@boxerfan23 жыл бұрын
Just once I would like to work on a ride as clean as this one. All the rides I work on are rusty and muddy.
@farboy43043 жыл бұрын
I thought that was the C10 kid. Bring the channel back c10 kid!
@jang69693 жыл бұрын
Nice work guys! 🇨🇦
@tkn24s4 жыл бұрын
Beautiful truck.! 👌🔥
@rjcarrillo64433 жыл бұрын
Looks badass 🔥🔥
@ivanjimenez88683 жыл бұрын
Belltech shocks are ok, since it’s owned by KW idk why they don’t make a stiffer mono tube shock for us street truck enthusiasts that like lowering our trucks.
@flipcarrizales77154 ай бұрын
Did you use any shims in the front for alignment on a single cab 96 gmc on 5 inch drop
@robbarmstrong87022 жыл бұрын
Super Clean!! Love the drop and the kit makes everything pretty straight forward. #RobbArmstrong
@obs_vicc41453 жыл бұрын
Went from c10 kid to c10 middle aged man Ughhh life hits everyone
@superc43084 жыл бұрын
Hey was ' nt that a cameo from the C10 kid ✌
@aronkaspar63693 жыл бұрын
Easy when you have a nice air conditioned shop with every tool you can imagine.
@AZProPerformance3 жыл бұрын
Unfortunately it's not AC, but wish it was! We did this with tools that most car guys would have in their garage as well, minus the lift. With that said, I have done numerous in my own garage over the years just as easily.
@p.b.sHUNTING4 жыл бұрын
Everything i bought from belltech for my truck (hangars/brackets) were a disaster. Not a single bolt hole was correct and 3 bracket sets the spring wouldn't even go into the pocket.... we had to use 2 sets to make 1 that we still had to open holes up to get in place. Pinion hardware broke while suspension settled and had to immediately get a parts store setup. Belltech's response..."nothing we can do" jegs made it right and billed them for lift time for all the mess I had to go thru. Belltech is a joke that makes parts out of the country and doesn't quality check.
@cencoast_7.3404 жыл бұрын
Damn, I thought they were some of the better parts. Luckily DJM is like 30 min from me, I’ll go that route.
@carlosgonzalez-kh8gm2 жыл бұрын
What is thw website for jegs i wanto to order my drop too
@SurlyMike4 жыл бұрын
That looks pretty sick. Can you share the wheel and tire size please? I doubt that I would add that brake kit to my truck but It would be nice to know if it effected the wheel offset.
@Mark-oh7ec2 жыл бұрын
There's a link in the description with the complete build bro 🤜🏽🤛🏽
@dawsoncopeland14234 жыл бұрын
Whats the tire size. Ie got an 88 OBS and im not sure what wheel size and tire size I want to run. I put 2in shackles in the rear but i may go lower. Im fixing to build a 4.8 vortec motor to put in the truck. Im also changing the grille. Possibly a roll pan and doing the tailgate handle flip
@badboyr66 Жыл бұрын
I appreciate you list the info on the build..but didn't list wheel backspacing
@fuelinjectedduck29644 жыл бұрын
Love the obs videos.
@smokeitloudbanks Жыл бұрын
All I watch is obs builds and other years cuz there is ts enough obs videos if there is a obs video I don't care what it is I'm watching it
@miguelangelsalazar16759 ай бұрын
Aahsome classic luv the the drop😎🙏 ready to cruise ❤ bow tie 4life
@G_marvelous852 ай бұрын
Will this same kit work on my 93' 2 door yukon?
@CenaJ675r Жыл бұрын
Am I going to run into issues running this kit with a Turbo400 swapped transmission and shorter driveshaft?
@jesusestrada46992 жыл бұрын
What size tires back side ? What size of whells?
@keepinitrealTRUTHFUL4 ай бұрын
Have 2000 chevy express 1500 what do u recommend
@dubworldvwadventures Жыл бұрын
Wish you had a before image side by side.
@CarlosSanchez-cj5wo4 жыл бұрын
Did you have any problems with pinion angle?
@ivanvargas85314 жыл бұрын
Clean work guys!!! I
@funguy79793 жыл бұрын
What do you recommend on this.... **97 Sierra single cab long bed V6 about to be 350 with 5speed manual**. I want to add add-a-leafs to my suspension and then lower it. Why? Because it's a work truck so I want to have added load capability of the leafs but be able to lower it....if possible. I order 15x10 (3in backspacing (-63mm)) with 275/60r15. I want to have a nice lowered, not slammed, stance. Fender flares will be ordered once I see how the wheels fit. Is it possible to lower after installing add-a-leafs?
@mikemichaletz70414 жыл бұрын
I have a 1977 P-20 step van lowered by cutting one ring in front of the spring and took the overload springs out and kept the regular leif pack and put air shocks front and back! My question to you is do they make a 5 lug pattern swap for front on back? I did buy a 6 bolt disc brake setup from a newer truck but was looking to see if there was a swap kit for the front in order to bag it?Thanks Guys,Mike
@patriciocarmona1809 Жыл бұрын
bruh, much needed video lol
@Clappedoutprojects Жыл бұрын
Did you have to notch the bed we’re it sits on the cnotch on the frame ?
@teodociofortanel7882 Жыл бұрын
nice work can i put s10 springs on 1995 chevrolet to lower the front
@MARKC0R32 жыл бұрын
Do you need to cut the bed to fit where the c notch bracket goes above the frame?
@AZProPerformance2 жыл бұрын
You can, yes... we have done it both ways.
@chic0_794 жыл бұрын
What size are you running on those 18's
@ronhellengreen59684 жыл бұрын
Were can I get 3 inch drop spindles for my 94 Silverado 1500? The only ones I've been able to find is 2 inch.
@AZProPerformance4 жыл бұрын
Nobody makes one unfortunately. Just the 2".
@manuelsaavedra32202 жыл бұрын
How much it cost a full kit like that one ??? Brakes and lowering kit…. I have a 95 GMC Sierra step side bed…
@derekdavis21923 жыл бұрын
I'm doin a Belltech 4/6 kit on a 91 I just bought. On the reg. cab trucks, do u still install the transmission tailshaft spacers or is that for ext. cabs only? I know the carrier bearing spacer is only for ext. cabs, but wasn't sure on the trans. tailshaft spacers. Thanks.
@AZProPerformance3 жыл бұрын
Leave driveline as is, and we leave them un touched on regular cabs.
@derekdavis21923 жыл бұрын
@@AZProPerformance thanks man
@moz0886 ай бұрын
@@AZProPerformance what size tire are you running on these 18” wheels
@Livemusic18002 жыл бұрын
Wish mine was that low/stance. 😕 hopefully soon.
@xxharrisonwolfxx69243 жыл бұрын
I have 20’s in the back and 18’s up front
@joseg402 жыл бұрын
Do you guys sell a drop kit for a 1996 Chevrolet 1500 ? it’s all stock looking for a 4-6 “ drop it currently has 20” wheels on as well .
Whats a good lowering kit without a c notch for a 96 4dr tahoe 2wd
@AZProPerformance6 ай бұрын
Belltech, and can get it right from us. azproperformance.com/products/belltech-3-4-drop-kit-95-99-tahoe-4-door-2wd-792?_pos=3&_sid=d895bf818&_ss=r
@Jeol7212 жыл бұрын
What rims are those?
@sidneibueno86474 жыл бұрын
Fantastic! Show, São Paulo Brazil.
@michaellopez9684 жыл бұрын
I can use factory control arms for drop spindles?
@rolandmack13 Жыл бұрын
Could you do this to a c2500 obs truck with the same kit?
@dylancopeland61444 жыл бұрын
I bought my 91 chevy already dropped. It has a 4/6 djm kit but instead of drop spindles it has 2" lower control arms. Is there a benefit to changing the spindle vs the control arms?
@scottydoesntknow2544 жыл бұрын
Control arms are better in my opinion because in most cases it keeps stock geometry.
@DrivenbyGears4 жыл бұрын
@@scottydoesntknow254 i agree keep em the spindles limit travel in my opinion vs stock ones.
@BurningSteel693 жыл бұрын
drop spindles and lowering blocks is all you really needed --
@AZProPerformance3 жыл бұрын
lol... Glad you have the secret parts list for a 5/7 drop. Good luck getting a 5/7 drop out of your spindles and block.
@smtbigelow3 жыл бұрын
putting blocks in the rear of a truck with the axle on top of the leafs will lift the truck, not lower it.
@gregoryjones97542 жыл бұрын
Did you reinstall the bumps stops in the front and rear?
@AZProPerformance2 жыл бұрын
Only rear, fronts get removed.
@ricardosolorzano18834 жыл бұрын
I have the same drop and wheels but one side is rubbing. What could cause that?
@AZProPerformance4 жыл бұрын
The front wheels aren't the same per side. On all OBS's I have seen, one side is closer than the other. Just the way they are.
@ricardosolorzano18833 жыл бұрын
Just getting back to you. Thanks. Friend of mine said to fender roll the bed.. Good or bad idea.
@gerardakau45042 жыл бұрын
I noticed there was no shock in the coil can I do that??
@AZProPerformance2 жыл бұрын
There are shocks installed.
@josevargas98442 жыл бұрын
How can i get the kit? I need the 4" front and 6" in the back.
How can I just drop the front 2 inches. I have an 02 Chevy Silverado
@AZProPerformance4 жыл бұрын
Just a pair of spindles. We sell the BellTech ones.
@johncalhoun80113 жыл бұрын
How much does a Lowering Kit cost for my 91 Chevy Short Bed. Including Installation?
@johncalhoun80113 жыл бұрын
Hello 🙋🏿♂️
@leviathan02323 жыл бұрын
@@johncalhoun8011 Those kits are $800-$900..Installation would probably be around the same if not a bit more.
@johncalhoun80113 жыл бұрын
@@leviathan0232 Thank you Sir 👌🏿
@leviathan02323 жыл бұрын
@@johncalhoun8011 no problem. Here’s a link azproperformance.com/products/belltech-5-7-drop-kit-88-98-c1500 You can also buy direct from Belltech. I just ordered mine lol
@johncalhoun80113 жыл бұрын
@@leviathan0232 Got it! Thank you Sir 👌🏿
@highwayjunkie72924 жыл бұрын
Can you do the 13inch brake kit without the drop spindle
@allanb32224 жыл бұрын
Yes you can, you'll just need larger wheels to clear them.
@ympmartinez20062 жыл бұрын
Is it true belltech spindles make front wheels stick out 1/2 inch?? Nice truck🤙
@AZProPerformance2 жыл бұрын
Thanks! Yep, they sure do push the wheel out 1/2", which is why we use these spindles now. azproperformance.com/products/react-2-modular-drop-spindles-88-98-c1500-8898-001?_pos=27&_sid=68198c54b&_ss=r
@ympmartinez20062 жыл бұрын
@@AZProPerformance thanks for responding. I wish I ask u before purchasing the belltech kit where I bought it don’t accept returns.😬 but I haven’t installed in the truck
@GueroObs Жыл бұрын
What color is that, color code?
@danielalvarez61933 жыл бұрын
Can I run 454ss wheels (15s) with this break kit???
@AZProPerformance3 жыл бұрын
No, the 13" kit requires 18" wheels or larger. Only stock brakes will work in the 15" wheels.
@dracoLoomis_2232 жыл бұрын
Can I lower my truck without cutting?
@AZProPerformance2 жыл бұрын
Yep, sure can. Check out the 2/4 drop. azproperformance.com/products/belltech-2-4-drop-kit-88-98-c1500-685?_pos=2&_sid=acea9db0e&_ss=r
@thecookfamily86072 жыл бұрын
How long does it take?
@ryanspell3 жыл бұрын
Do they make a kit that can fit 15×10 wheels?
@AZProPerformance3 жыл бұрын
You can do 15x10 wheels on the back with this kit.
@samuelmontecelli95252 жыл бұрын
Are the rims 18x9?
@bartman1078ify4 жыл бұрын
What size wheels are those and make. I want those for my truck.
@wadeepps34433 жыл бұрын
hey bro, the wheels are called torque thrust 2s and the brand is american racing wheels, check out there web site, im guessing the sizes are 18 x 8 in the front and 18 x 10 in the back, hope that helps, i have some of these on my obs
@joshuacanada92082 жыл бұрын
how long is that bed?
@TheMilkMan911x2 жыл бұрын
So you ran with no coil isolator at all?
@AZProPerformance2 жыл бұрын
No spacer on top.
@TheMilkMan911x2 жыл бұрын
Ok thanks for the reply, and Happy Holidays!
@GladiatorJT202 ай бұрын
Does it bottom out ?
@AZProPerformance2 ай бұрын
Using the BellTech notch on a 7" drop, it can bottom out at times on large bumps. However, we have developed an under bed step notch to help with this a lot and add 2" additional travel. We also combine that with a drop kit too or available by itself. azproperformance.com/products/pro-performance-ultimate-drop-kit-88-98-c1500?_pos=1&_sid=5dd626284&_ss=r azproperformance.com/products/react-c-notch-88-98-c1500?_pos=1&_sid=28962dec8&_ss=r
@rolandosanchez36644 жыл бұрын
Ok where are you guys so you guys can drop my truck?? Thanks! 😊
From ourselves... we sell the parts. Link for more details is in the description of the video.
@deltafarming1184 жыл бұрын
Did the driveshaft needed to be shortened?
@AZProPerformance4 жыл бұрын
No sir.
@jruiz17244 жыл бұрын
What size tires are you running on those wheels
@fbbc64952 жыл бұрын
Nice
@rutilioperez59183 жыл бұрын
Do you know if there’s anyone who does this type of work in NYC if so lmk please 👍I have a Chevy 1998 that I want to lower
@jrperez77734 жыл бұрын
Where do you order parts
@texasmadewhips834 жыл бұрын
What’s your contact info how much for the brake kit
@kevingarroofficial24713 жыл бұрын
about $2k
@thebestpainter7343 жыл бұрын
Can you do my Chevy 2002 and how much? I really want my truck looking just like that ..low..low...low👍👍
@AZProPerformance3 жыл бұрын
We can and just give us a call @ 480-420-8175. We are currently booked until Jan. 2021, but can do after the first of the year.
@sergiobernal37402 жыл бұрын
Does the front get shocks ?
@AZProPerformance2 жыл бұрын
Yep, sure does and did.
@rileycryer95722 жыл бұрын
Do the tierods hit the frame?
@AZProPerformance2 жыл бұрын
Nope
@2dacta6352 жыл бұрын
Busco ese kit de suspensión
@daltoncahn553 жыл бұрын
anyone know who makes a 4/6 drop kit for a 97 k1500 4wd?
@justinwells29033 жыл бұрын
I bought mine from Summit Racing Belltech 6605 - Belltech Rear Flip Kit and Belltech 3920 - Belltech Torsion Bar Keys the choice of shocks is yours. This link will also help you: www.powernationtv.com/build/154/red-tide
@lovemendez54063 жыл бұрын
Where did you buy the kit?
@AZProPerformance3 жыл бұрын
From ourselves. azproperformance.com/products/belltech-5-7-drop-kit-88-98-c1500?_pos=1&_sid=be1070675&_ss=r
@775automotive93 жыл бұрын
I got the same drop but my rear end is so bouncy.
@AZProPerformance3 жыл бұрын
Try the Street Performance, as this is what we used with this truck. It is valved a little heavier. azproperformance.com/products/belltech-rear-street-perf-shock-lowered-88-98-c3500?_pos=1&_sid=610fbb585&_ss=r
@775automotive93 жыл бұрын
@@AZProPerformance thanks I will give it a try, can I use the same shock for both sides or are they different part numbers?
@AZProPerformance3 жыл бұрын
@@775automotive9 Same PN for both left and right.
@AZProPerformance3 жыл бұрын
Make sure you have shock extenders too. azproperformance.com/collections/belltech-88-89-gm-truck/products/belltech-shock-extension-kit-88-98-c1500-6652
@775automotive93 жыл бұрын
@@AZProPerformance I do have them somewhere lol, it’s been years since I did the drop. Another thing I realized is the previous owner must have or who knows, but on my leaf springs I only that 2 leads and that lower one. I have seen most trucks with atleast 3? Not sure if my leaf springs are also not got good anymore.
@jrocha383ws64 жыл бұрын
Hey guys! Are those brake kits available for abs brakes?
@allanb32224 жыл бұрын
The truck they installed the brakes on had abs.
@jrocha383ws64 жыл бұрын
Yea just watched the video.. pretty nice brake kit.
@davidfink97294 жыл бұрын
Fucking awesome video again. Got a question - how does the belltech 4/6 drop go? In other words same steps as this video?
@adolph2892 жыл бұрын
nice
@johndoe98242 жыл бұрын
Does this kit require pinion shims?
@AZProPerformance2 жыл бұрын
Not on a regular cab.
@johndoe98242 жыл бұрын
@@AZProPerformance would a ext cab need shims?
@AZProPerformance2 жыл бұрын
@@johndoe9824 Yes
@johndoe98242 жыл бұрын
@@AZProPerformance oh thank you
@johncalhoun80112 жыл бұрын
Where are you guys located?
@AZProPerformance2 жыл бұрын
We are in Mesa, AZ
@johncalhoun80112 жыл бұрын
Thanks
@lifestyletruckin78065 ай бұрын
They still need experience I would did everything with out removeing the bed
@AZProPerformance5 ай бұрын
Yeah, we don’t know much about trucks, you caught us. 😂 Why work harder, when we can work smarter being we have the means to easily remove the bed. If we need any tips or tricks, I’ll be sure to reach out to you. 😉
@yomommajumprcables3 жыл бұрын
Yes Sir that's the only way I ride...LOW
@robertgarcia73583 жыл бұрын
Ever consider selling the truck I really want it
@AZProPerformance3 жыл бұрын
We did sell it, but sold before we could even advertise it.