I did everything accordingly and tighten up the gold fx blade and the andis t outliner tension screw but Even after I oiled them they seem to be pulling the hair and when I pinch the blade with my thumb they tend to stop moving or slowing down
@ruminating15963 жыл бұрын
Cutting that extra plastic around the blade is a must if you wish to modify your blade with no complications. I just cut off all that plastic and the tension screw and zeroing was 1000x easier than before. Thanks for the vid.
@opinionatorX6 жыл бұрын
Makes sense. I've learned this from experience. In fact when you loosen tension to much you get hair pulling. What is the best way to adjust trimmers when on side seems to hit tighter? I find this problem with many andis out of the box.
@truewax2572 жыл бұрын
Great video - What tool did you use to cut the plastic over the top of the trimmer? A dremel tool?
@rodolfomanuel7975 жыл бұрын
i don't know who told him that ring looks good on his thumb
@NestorOropeza4 жыл бұрын
It’s called a iRing
@deedolan3993 жыл бұрын
Very detailed. Loved it! 💪🏾😎
@ShayanSiddiqi4 жыл бұрын
Hey man, I have same T-Outliners. But my screw on the blades are stuck and they are not coming out? What can I do take out the blade? I wanted to replace it
@FilmMasterIrving3 жыл бұрын
Any solution yet?
@RaveXmusic4 жыл бұрын
Them clippers be hittin' now bruh! ✂️
@V_-4-_VENDETTA714 жыл бұрын
Man, adjust the dam screw 😂😂
@williemobn24763 жыл бұрын
I bought these a while ago but the screws are tight asf and I cant modify it
@michealrobinson97783 жыл бұрын
do I have to adjust tension bar after zero gapping????
@smf4272 жыл бұрын
Yes. Loosen the tension screw 1/4”.. the turn your trimmer on …if it’s loud, tighten the screw 1/8in. It takes time to manipulate the tension if this is your 1st time. Test it on your arm to make sure it’s not pinching or cutting you. Good Luck
@khonchusakwerius72374 жыл бұрын
Tension bar will travel in the path of least resistance w/o a controller which is the purpose of the screw.. the screw is to keep the bar in check..
@_NEW3RA_6 жыл бұрын
They say a man that wears a ring on his thumb is gay. Random 😂😂😂
@taseenr25154 жыл бұрын
Great video bro.
@nwoke.ezu.ike_until_death5 жыл бұрын
My question is, why do you have to cut the clipper open? Why can't you use it just like that?
@nathanielbell98875 жыл бұрын
Hügo Nwa helps it run cooler longer
@jordanhallel37844 жыл бұрын
Also helps w/ when you’re angling your clipper
@AztecRay6 жыл бұрын
What is this, rocket surgery
@asuas31154 жыл бұрын
Uh I don't think that's possible
@paulakeenjr40166 жыл бұрын
Time that I will never get back, the rest of my life. Learned nothing.
@therealchucktaylor33925 жыл бұрын
Still searching for a helpful video on adjusting the tension. Click bait 😂😂😂😂😂
@BeautyofScent7 жыл бұрын
you over explain thangs
@TomekinaOfa7 жыл бұрын
BeautyofScent but do you understand it?
@VForbes6 жыл бұрын
I find that to be a problem with 80% of instructional/how to videos on KZbin. Like if someone is watching this most of the time they already know the basics, they don't need you to explain the difference between top and bottom blade and what they're for. Ugh
@shirtpaints86436 жыл бұрын
Yeah,and at the same time,you get peeps making comments like...."you left this out,you left that out." "you forgot to mention this...and that..." But i agree with ya though,but some retards need things to be overly explained to them...lol