We updated our Slatwall installation video guide. We hope that you find this helpful. Should you have additional questions please do not hesitate to reach out to us.
Пікірлер: 18
@prushamusic Жыл бұрын
This is a great how-to video! Easy to follow and straight to the point. Thank you!
@ProslatInc Жыл бұрын
Thank you! So glad to hear you found this helpful.
@brandonhelscel35634 ай бұрын
What about installing on metal studs? This is a commercial profuct and most commercial buildings are metal such as ours. Thank you.
@ProslatInc4 ай бұрын
The screws we provide with our Slatwall are wood screws. When installing the Slatwall panels on metal studs you will need to get 1 inch or 1 1/2 inch self tapping screws.
@bradwilson1583Күн бұрын
Every time I touch the studfinder it goes off. Help
@TomBrown-xq8oq2 ай бұрын
Do we need to make hole in stud before installing screws?
@ProslatInc2 ай бұрын
Hi Tom, No you don't need to drill pilot holes into the studs. As you screw through the Slatwall panel you go through, into the studs. Thank you,
@johnwilburn85248 ай бұрын
what options do I have if the ends do not have a stud?
@daniellarose55728 ай бұрын
Cut the panels to length so they start and end on a stud…mitre saw works well
@dbernstein852 ай бұрын
Tear down house, rebuild new one with studs in place for slat wall installation
@andykar139 ай бұрын
Can this be installed if there is no drywall?
@ProslatInc8 ай бұрын
Hi Andy, I would check your local fire safety codes to be 100% sure which walls require drywall. The product can be installed directly onto studs - no drywall.
@Ripcord1011 ай бұрын
What’s the weight rating for 18” studs?
@ProslatInc11 ай бұрын
This product has not been tested for 18” stud centres, it was done for 16, which would be 75 lbs per sq.ft. If you have 18” stud centres I would opt for our Procore Slatwall or higher. This will give you 200 lbs per sq.ft
@huevosrancheros7025 ай бұрын
What if my studs are 12” apart?
@ProslatInc5 ай бұрын
Thanks for the question. You would screw into the studs at every 12 inches. It becomes an issue when you are wider than 16" apart for PVC Slatwall.
@huevosrancheros7025 ай бұрын
@@ProslatInc thank you for clarifying. Does Proslat sale additional screws? With my studs being 12inches apart and not 16, I am having to use two extra screws per panel. I been to a couple hardware stores and can’t seem to find a great match. Any help would be appreciated.
@ProslatInc5 ай бұрын
@@huevosrancheros702 Hi Don, my pleasure. Reach out to us from our website (dont think I can put email addresses in youtube comments) we would be happy to send you extra screws/ hardware we would just kindly ask that you cover the shipping cost which would not be a lot considering the package will be small. Thank you,