Impact Wrench vs Impact Driver - What's The Difference?

[@Nitrxgen]

To anyone who is considering buying either a impact driver or impact wrench: Make sure you buy the appropriate impact-rated bits or you will snap them. Especially sockets if you're doing heavy duty work, you want impact-rated sockets usually made of chrome molybdenum (usually with a black coating). Avoid using chrome vanadium (actual chrome) for impact tools as they will shatter eventually, these are really only for hand-cranking.

[@zytigon]

Well thanks, you just saved me wasting money on an impact driver when i was actually needing an impact wrench

[@juanh1093]

I wasted my money on a impact driver. Now I got to try to sell it.

[@michellezunnurain3555]

@@juanh1093 return it.

[@juanh1093]

@@michellezunnurain3555 I wish I could. I had it longer than the return period unfortunately. I'm going to try to sell it.

[@michellezunnurain3555]

@@juanh1093 a return period is made up nonsense. If you have the original receipt I might argue with them. Or exchange for the wrench.

[@michellezunnurain3555]

@@juanh1093 or a store credit

[@charlielucky4201]

I bought a 2017 Ram with a 5.7 Hemi about six months ago. I've tried to take advantage of the time this pandemic has given me to learn new things and took on modifying my truck as one of those projects. I am not a mechanically inclined person. My only experience with any type of vehicle work is changing tires and oil at a shop when I was in my early 20s (aka a long time ago). So far, I've installed a K&N cold air intake and a throttle body spacer, which I'm sure are extremely basic to a lot of the experts who watch this channel. Still, baby steps. Likely to move on to exhaust work next. Videos like this have been extremely helpful in explaining the tools I should choose in a given scenario. Thank you!

[@sabrinamulligan6235]

Upgraded from an older 18v kit. kzbin.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

[@johnboyjr21]

3:56 "Only 450 Ft-lbs" of fastening torque!? How is Jiffy Lube gonna get my oil pan drain plug snugged up with that shit?

[@Meekmillan]

_Sir did you realize you have a drain plug inside your oil pan? We can fix that but it'll be another $110_

[@hamie63_m]

Lol

[@Alex-lc1bv]

Even lug nuts are only like 90-140ish ft-lbs.

[@94SexyStang]

@@Alex-lc1bv NEVER in the real world though, try 500lbs!!! Go gets your tires rotated, and TRY to take it off with even a shitty 300lbs impact gun...NOT happening, you're gonna need 700lbs ALL DAY, because that's what they're using to put them ON!!

[@rjmari]

@@94SexyStang I guess my tire place is legit. Because I can crack my lugs with the crappy wrench that came with my car.

[@Azzamess182]

Nice, short, no stretching over 10 mins bs video, subscribed!

[@MrD3000]

Pretty amazing that impact wrenches can be battery powered now, and they’re actually fantastic. Modern battery technology has changed everything in the tool world.

[@wmc128]

Pneumatic tools still beat cordless. Show me an impact wrench that's faster than IR Thundergun. I will wait.

[@MrD3000]

@@wmc128 I think that’ll always be true, as pneumatic is insanely powerful. But, that amount of torque is only needed in relatively few situations. For the majority of users (myself included), these battery powered ones will suffice.

[@Jtwizzle]

@@MrD3000 The thundergun is fast but not as powerful. If it can not even break free the fastener what good is the 10000rpm? Battery impacts can put out 2x or more torque than the thundergun.

[@jonasstahl9826]

@@wmc128 Maybe faster, but i cant carry a 100 pound compressor in my toolbox.

[@gewizz2]

yes my cheap lipo powered drill has been amazing, so handy.

[@LinearElasticity]

Great video - you're not trying to break the 10min money-making mark, or, repeating yourself over and over just to drag the video out... instead, you manage to answer the simple question proposed in the video's title! I feel more informed for watching this - keep up the good work.

[@rubes1688]

For real. That's the only reason I actually watched this video

[@CarsnStuff]

Yeah for awhile i've been using my impact driver just because its sort of my everything tool. whether its doing a small construction job or working on my car its just been used for it all. but i really need to get a proper impact wrench. The little socket adapters just dont cut it and break easily. Considering i do more automotive than construction it just makes sense.

[@Just.Tap.444]

Just got me a M12 Fuel 1/4" Extended ratchet and that thing is beautiful for automotive/auto-body work. Use it everyday

[@Oblimix]

I would recommend that people get the right tool for the job. I have a makita impact driver that broke when trying to unfasten some nuts on a car's tire. I took it apart to see that some teeth of certain gears had snapped off, and were blocking the rotation. Removing the broken teeth made it work again, but it shows that the tool is strong enough to break itself with its own power. I imagine an impact wrench would have to be sturdier on the inside, so as to not break its own gears with the higher torque.

[@siveti15]

Impact wrench then for unfastening nuts on a car tire sir?

[@siveti15]

Impact wrench then for unfastening nuts on a car tire sir?

[@forrestjbernard]

@@siveti15 yea

[@billbillerton6122]

Uhm that's what an impact wrench is for.

[@TobyCostaRica]

That and the Surge hydraulic impact driver is a pleasure to use. So much quieter

[@BoyToy21005]

I'm going to offer a different final perspective. If you can only get one Impact tool,, get the small size Impact wrench with the Dentin Pin, and then get the Driver adapter bit. The reasoning is simple.. Bolts are usually bigger then screws, and usually require more torque. So if you need to turn a bolt, pull the adapter off. If you need to drive some screws,, put the adapter bit back on. The difference in weight between my wrench plus adapter, and the driver is not that much. But when I need that that socket head, i know its attached to a proper 3/8" wrench head, instead of a 3/8" adapter bit sitting inside a 1/4 inch socket adapter bit. I have the Dewalt DCF880B, and I do everything short of brushing my teeth with it.

[@traxxgoingwild]

Can you elaborate as to why you suggest picking up a deten pin over friction ring? I'm in the same boat currently. I'm looking to buy my first impact tool and my thought process is basically a reflection to what you explained here. If I was to choose I'd rather have 1/2 at all times and use 1/2 to 1/4 adapter for screws. I'm looking to get dewalt dcf 921 as it's compact and has a punch from what I was able to research.

[@mooretofitness862]

Second this comment ^ currently in the same predicament.

[@JoeJoe-wp1vv]

So what you're saying is to get my teeth cleaned real good should I get the Philips Sonicare 1100 or the 1400? 🤣🤣

[@fitnesspoint2006]

@@JoeJoe-wp1vv i prefer oral B 8000 pro

[@jthomp997]

I typically use my impact driver as my 1/4 impact wrench and then have my 1/2 and 3/8 cordless impacts.

[@ant98tan]

Hands down the most detailed and simply put explanation. Thank You

[@Alkatraz415]

I was waiting for the Milwaukee commercial to end so I could watch the video. Once the commercial was over there was no video! What the heck guys!

[@robertknight4672]

I have both tools. I don't use the impact wrench often but it was a budget model on Amazon and has come in handy on a few occasions. However I use the impact driver all the time mostly with socket bits loosening the smaller Fasteners when performing maintenance snowblowers and and I typically just tighten those nuts and bolts back up with hand tools.

[@pruett89]

GREAT VIDEO! It had the basic info upfront and then the details laid out in a logical way! Thank you for making this and not wasting our time with fluff!

[@ptrproducttestreview9593]

I totally agree! I don't like videos that have a bunch of filler dialog of guys just repeating themselves. I made a video a year ago about impact guns vs impact wrench. Here is the link in case anyone is interested. kzbin.info/www/bejne/l5rZXoOObb5ogbc

[@FR-yt5ik]

Saved me 1-2 hours of research. Thank you.

[@SirGolfalot-]

Good info. I'm now wrenching on my own vehicles. I'm buying tools as I need them for an upcoming job. The cost savings of doing my own work pay for the tools. Sometimes you have to buy a tool because of the time it saves getting the job done.

[@DGFishRfine1]

It's sure not designed for it, but the little M12 impact DRIVER will pull the lug nuts off my car!

[@ginge5253]

Really good explanations for both tools I've had a cheap worx impact driver for a while and it's really useful for speeding stuff up once I've "cracked" a nut or bolt by hand but I've just bought an xr dewalt impact wrench and damn that thing doesnt mess about. I work on motorbikes more than cars so the little driver is ideal most of the time but the seized axles, exhaust studs or rota bolts and the impact wrench is a god send. Wouldnt advice using either to start a bolt off though or finish

[@noeeon9910]

That's exactly how I use mine. On smaller bolts it does the job quite nice if I can't break them in hard to reach areas where I don't have the leverage.

[@kleinfeicht]

I have both wrench and driver first got an driver an made most impact things with adapters but the usually wear out quite fast and broke now i got an impact wrench and love it...

[@randomhobbies5796]

Weekend wrenching. That mid size impact m18 wrench is looking good. No more hoses and loud compressor

[@jwilsonhandmadeknives2760]

don’t overlook the M12 stubby impact wrench. i take lug nuts off with it and it’s still small enough to get in behind brake calipers.

[@randomhobbies5796]

@@jwilsonhandmadeknives2760 damn. Nice thanks for the info

[@dand3975]

I really like my DeWalt 20 volt impact driver with a small battery. Great for driving screws leg bolts and small nuts and bolts. For the big er tasks like lug nuts, u bolts and rusted bolts that need to be broken off nothing beats a air powered Ingersoll Rand Thunder Gun. Sounds great too, it is like a Ir-231 on steroids.

[@cardioandfriends]

Dewalt’s 20v should have no problem with lug nuts because it can go to 1300 inch pounds. I’ve got the old 18v model and it takes off mine just fine, maybe with some help from penetrating oil. given I don’t drive a semi or 4x4

[@ACUNA909]

This whole time I was trying to figure out why my impact driver wasn’t loosening my lug nuts 😂 🤦🏽‍♂️ Thanks for the video, it’s very informative.

[@MathieuPrevot]

Do you see any advantage of using an impact wrench (with say 1000Nm) for non bolt jobs, eg., tapping, drilling, over drillers and impact drivers ?

[@johnsacco5095]

What a great, straight forward comparison. Thanks. I just subscribed. Keep up the great work and I look forward to more reviews.

[@ptrproducttestreview9593]

I made a video a year ago about impact guns vs impact wrench. Here is the link in case you are interested. kzbin.info/www/bejne/l5rZXoOObb5ogbc

[@CompleteHealthControl]

Great video, really enjoyed the clarity you offered here. Something that would be great is to understand the various sockets, adapters that are right to use with each tool. I almost picked up a universal head/angle changer for an impact wrench that would have shattered on first use, and was directed to an impact-rated version of the same item (2x the price) that would actually do the job.

[@Go4thandrock]

FANTASTIC VIDEO. but that air tool guy wasn't going in a star pattern a couple times. But everything else was amazing.

[@brentjohnson6654]

Great video. I have been wondering about having too much torque when screwing into wood or using a self drilling screw into hard metal. I have had trouble with them in the past and have broken a screw head or two off before. So what you are saying is that Impact Wrench should be used for high torque bolts and nuts. Then a impact wrench would be better to drive torx or hex head screws into metal and of course wood. I don’t use these tools very often so it is okay if they take longer, I am just wanting not to ruin parts or threads. This is a casual or hobby activity for me. Thanks again for your videos.

[@Tonyhouse1168]

Honestly, my impact driver works great for torx, hex head, and every other type of screw. I don’t use the impact driver unless I’m working with nuts of bolts

[@matejmotuz108]

I was looking for a video like this 3 days ago , well now it's here

[@jasonliblick9879]

I do a mix of carpentry, and automotive work and I’m only 17 so I went with the impact driver. 1 tool can do it all for a good price. Just sometimes gotta use a ratchet and a good ole cheater bar

[@CytroGhost]

@´` ´` not really all. If too much torque the adapter might break. The driver is only good for light work. I use an impact for suspension and engine work

[@jasonliblick9879]

@´` ´` can it do it? Yes, but the impact drivers don’t have near the torque output as an impact wrench. If you’re on a budget, I would absolutely recommend a makita, Milwaukee, or dewalt impact driver. If you have the money, I would get a driver and wrench

[@georgecroney6168]

@@jasonliblick9879 I'm happy enough with my driver for the time being, it's good to brake up to maybe 13mm bolts and anything larger just break by hand like the olden days and whizz it off. It's easy for a 30 yr old guy to say just buy this and that but I'm 20, similar age to yourself and I can't swing 200+ for an impact wrench. Plus I do a lot of other work. The difference is nowhere near as big as using it to drill holes, they really suck for drilling.

[@fambam7979]

Great video, I learned a lot between both tools. I recently switched to battery powered tools, your explanation for use and power is very helpful. Thank you.

[@AnOkayPerson]

Thank you, I was looking for the tool with the most nut busting torque ;)

[@roycemartin9068]

Here’s a tip if you’re looking to save some money. Get a 3/8” impact wrench and buy a 3/8” to 1/4” hex adapter. You’ll get both tools in one. The key is to buy the higher powered of the 2 if you’re going to go the one tool route instead of buying both driver and wrench (the impact wrench is going to be more powerful than the driver, Atleast in most cases; check before you buy). With the 3/8” impact wrench and hex adapter you’ll have the power to do everything a 3/8” impact wrench can do and also have the versatility of a 1/4” hex impact driver.

[@Apolloneek]

One accepts sockets and one accepts bits. The weird part comes with having bits that accept sockets and sockets that have bit ends like screwdriver or torx ends.

[@rafaelverastegui7611]

Very clear and professional, I learned a lot today, thanks !

[@lduranceau8046]

I started to drill a pilot hole in my house cement foundation using a regular drill and a masonry drill bit. However, I now find that I'm not making much progress after 20 minutes. If I decide to use a hammer drill to complete the pilot hole, will I need to change to a hammer drill bit? Thanks.

[@jessewoodward5056]

Yes

[@jeffhansman2829]

I am about to by a drill/driver combo and really didn't understand the difference between these two. I now know I only need a driver and not a wrench. Now, onto bits; many thanks for a clear, succinct explanation and demo.

[@voiceofreason9238]

Re: passenger car or SUV. Would a typical driver ever keep a quarter-inch impact driver w/socket in their car to remove lug nuts in case of a flat on the side of the road?

[@jat-justamaturetech-philpj8285]

@@Protoolreviews . Hi. Would a Flex 1/4" impact work with removing passenger car lugs, control arms and ball joint nuts and bolts?

[@redsunsmr284]

Finally plopped down the money for a combo set of milwaukee impact driver and drill. Since I work on car stuff a lot, debating on the m12 1/2 stubby impact wrench, or just get the m18 high torque. Compactness vs power is my dilemma.

[@jimmyf.x.9526]

Thanks!. You just cleared my confusing caused by Homedepot shopping experience. 👍

[@Mixwell1983]

I have socket adapters for my impact driver and also a 1/2 socket to 1/4" for my impact wrench. This lets both tools overlap and fill similar roles depending on the situation.

[@spencer82rocks]

Listen to the pro,learn from the pro,will save some money overtime,well explained,very direct info,big thanks 😊

[@DreadxOwl]

I work auto body so i’m constantly pulling panels and i recommended to get a impact driver instead of a impact wrench. Should i eventually get a wrench as well?

[@Alucard-gt1zf]

What you need if all you're doing is pulling panels Is an m12 electric ratchet , can take out all body bolts with ease

[@jake4194]

@@Alucard-gt1zf what size, 3/8" or 1/4"?

[@HepauDK]

And then there's the Bosch GDX that combines the driver and the wrench with both sockets (1/4" hex and 1/2" square) in one. My own GDX 18V-Li (older model with brushed motor) has up to 180Nm (~133 ft-lb), depending on the setting. Not much, but sufficient for my personal diy use.

[@InsuranceIsLegalizedRobbery]

Have both models ..That model# GDX18V-1600 (brushed motor) and GDX18V-1800 Brushless motor. rated at 150 Ft-lbs of torque, and, I like that what Bosch doing is they’re having those last 4 digits of the model numbers as an indication of the torque rating, brushless one is a lot more compact, front to back, at least 1” difference there, also thinner. I like them both, they’re good tools and the color is pretty nice

[@ytb3748]

I work in IT and certainly do not need those tools but once you walk into my garage, you see them all hanged in there 😅

[@cliffordpress1]

Thanks!

[@trentonc9141]

Thanks this was very useful. I'm curious, do torque wreches have a setting to control the torque before disengaging? For example, can I get a battery powered or corded impact wrench to stop driveing the lug nut when it gets to 100 pound-feet? Or is that only availabe in pneumatic torque wrenches? Thanks Oh yeah does one that says brushless vs one that doesn't say that make any difference? I'm not sure what each ones does. Thx

[@juanh1093]

You say the mid torque starts at 400 ft/lbs. If I get a impact wrench giving 300 ft/lbs to remove & fasten tire lugs, should that be adequate?

[@jake4194]

I think tire lugs are 100-150 ft lbs

[@hibernatorawake]

Hi there. What would you recommend to get for assembling gym equipment like power racks with one inch hardware and such. I currently have a Bosch impact wrench. I’m not sure if it’s under powered or what not but it starts shaving the nuts like crazy just getting them on. I’m not even taking them off. Just bolting it together. Any recommendations ?

[@roycemartin9068]

The only difference is the chuck versus the square drive. I bought a snap on 3/8” drive impact and then bought a 3/8” to 1/4” hex adapter. So it serves as both as it can take regular sockets and it can also take any 1/4” hex.

[@xRoyalSmoke]

Milwaukee liked this video 👍

[@jasonlin9805]

Yes

[@Jerdpo]

Exacly what I was looking for. Thanks!

[@RenegadesGarage]

Pro Tool Reviews.. Cool video. But isn't there a difference in the actual mechanism between the impact driver and impact wrench? In the way it hammers or the direction of the hammer?? Doesn't the impact wrench hammer hit on the turn and the impact driver hammer hit in and out like a hammer drill???

[@RenegadesGarage]

@@Protoolreviews I seen someone on KZbin talking about it that's why I asked.

[@breaking_bear]

This was a very informative video. Thank you.

[@oompalumpus699]

I really appreciate this video. Without it, I would have ended up buying an impact wrench which I was something I didn't even need. I thought impact drivers and wrenches were the same thing. Again, thank you.

[@svonasek]

Same here, excellent video and explanation!

[@shirazdamji1092]

Question: want to drive 1/4”x 4” long lag bolts into dough fir. What size impact wrench do I use?

[@adamthomas1222]

If my impact driver is rated at 150 ft pound and my lugnuts on my compact car is only at around 75 ft pound, I don't see a problem using an impact driver with a wrench adapter to tighten or loosen lugnuts on my car. It's not even pushing the tool to the limits, it's only using half it's power. So I guess an impact driver is good enough

[@dancostaregni7631]

No you need a impact Wench

[@MrD3000]

Learned something new today. Thank you.

[@Random_Vince]

Wow!!! I learned a whole lot and it only took 5 mins and 54 seconds!!!

[@gerryortiz8324]

Thanks for your video! Which do you recommend for changing tires on a Ram pickup truck I’m assuming 1/2 inch mid torque impact wrench

[@ClubAmerica92]

Did you ever find out? I’m looking to remove lug nuts too

[@dancostaregni7631]

a impact driver wont remove them ,You need a half inch impact GUN

[@CheckmateWithPawn]

I'm going to make a really simplistic question, and I might be way off, but it sounds like the wrench pulls out and the driver pushes in. At least in terms of intended purpose. Is that right?

[@choyjimenez4112]

Love that you included the compressed tools every once in a while, all in 1 video!

[@babilmesopotamia3733]

You money saver , great job Will done

[@spankymagee]

Touch on when and why to use a powered ratchet, which has very small torque and speed. When would you ever want to grab one of those if the impact wrench can do it all, in that same nut/bolt size range.

[@Alucard-gt1zf]

You can't fit an impact wrench everywhere An electric ratchet is God in small engine bays

[@MarcosElMalo2]

🎼 It’s in the way that you use it 🎶

[@MrAerazo]

Great information, just for me as I’m a inglés as second language speaker I find that your speech speed is rather too fast, It is okay for me all I got to do is resume the track a couple of times to understand your concept,could you teach us a little slower please… Thanks for the great info, Good job

[@AndyKingCo]

Great video and explanation thanks!

[@whitebmw528i]

Thanks for the quiz info I was wondering what I needed for this rusted bolt now I know

[@4WinterTires-uv1mr]

Great vid and straight to the point!! Thanks

[@DaltonPepple]

What about 1/2 inch Drill Drivers? Can you/should you get an adapter for lugs?

[@Revelation_Overland]

Great video but I’m still not sure what to get. I just need something for lug nuts on my Jeep. From the video, I would say a 3/8 impact wrench. 400 ft lbs. but I’ve also seen people do it with a 1/4 impact driver which is much cheaper.

[@busman2050]

1/4 inch not strong enough, overstressing the tool. Use a 1/2 inch

[@dancostaregni7631]

@@busman2050 Right on

[@firegal2k]

Thanks for this very informative video. Please, which size cordless high impact wrench removes vehicle lug nuts? For my tire changes on the side of the road. Thanks.❤

[@busman2050]

For car or light truck lug nuts use a 1/2 inch with at least 350 foot pounds of torque. I saw a ryobi kit one at Home Depot today for $120.00 that would be good for that use. You can also get a Milwaukee or DEWALT for more power but will pay several hundred dollars more. Avoid the no name cheap guns.

[@firegal2k]

@@busman2050 Everything I own is Ryobi so I’ll opt for that one. Thanks for mentioning torque too and for presenting various options for myself and others who may be reading this. You have been very helpful. Take care!!✌️🌸☮️

[@trinhk]

Fantastic video, thank you. When tightening with an impact wrench, how do you know how much torque are you applying?

[@Protoolreviews]

The best way is to tighten the lug nut in low until it impacts a few times and then use a torque wrench to make sure you’re not over tightening it. Since most people don’t have a torque wrench on hand, you can use the impact wrench the same way, and then hand tighten the lugs with your tire iron. Most vehicles are only specced to have 80 - 125 ft-lbs of torque on the lugs, and even compact impact wrenches can do that. When you over tighten them, you can damage the threads, or sometimes even shear the entire stud off. Either way, that can cost a couple of hundred dollars per wheel to replace damaged studs.

[@trinhk]

@@Protoolreviews I finally got and used an impact wrench for the first to changed my tires. It definitely saved a lot of time. One thing I'm sort of nervous about when I loosen the nuts, I'm afraid that it may strip the lug nuts. Is that even possible? Thanks in advance!

[@wild_away]

Great comparison Cheers 👍

[@b-2466]

Great video guys.

[@jonathangarzon2798]

@@Protoolreviews the drive style is obviously different but do they not have hammer and anvil motors in both? Of not what is the actual difference in internal mechanism

[@KoneetRollForming]

can we use an impact driver for tapping in steel, if possible make a video on that?

[@roykeene2097]

Use self tapping screws with hex heads and adapter on your drill for the head. Worse case scenario use drill bit to start your hole. Just make sure it’s smaller than screws you intend to use.

[@jf9458]

Do they make drills with the 1/4” hex chuck?

[@gregholmes-brown5628]

I’m thinking about picking up the new Bosch “Freak”. This video was very insightful

[@tiptoe2323]

Can I get an an adapter for any deep socket nut driver for my impact driver? Thanks

[@Steathl]

I want something to work car wheels...weekend warrior to clean and detail weeks. What should I get?

[@busman2050]

Get the 1/2 inch gun with at least 350 fat pounds of torque. I have a craftsman one but ryobi has one in sale now for about $120.00. If you are not a pro either of the above will work on car or light truck lugnuts. The really cheap ones for about 69.00 are not very good.

[@leonvanderlinde5580]

How about combining both and have something like the Bosch models that combines the driver and wrench.

[@Jackal_Blitz]

Fantastic video. Thank you very much.

[@johnshipps441]

So helpful I just subscribed! 💪🏼

[@cabezotaz1]

To remove lug nuts Impact driver or impact wrench?

[@MarkusMaximusAurelius]

Tool manufacturer sales reps claim that the motor technology is different between the driver and wrench, and that we should therefore use “the right tool for the job”. Yes there are nuances, but if a driver and wrench have close to the same torque rating, can I use them interchangeably with adapters? Mainly interested in using my driver with an adapter for my tire lugs. Are the manufacturers just trying to get us all to buy two tools instead of one?

[@ekjl]

Highly informative. Thank you!

[@mini14head]

Great simple explainations. Well done. Thank u.

[@jacedaace01]

Great information...very helpful! Thanks for sharing your expertise... I've now subscribed as a result of this video...

[@kennethhoneycutt4513]

I am looking for a decent cordless impact wrench for automotive any suggestions

[@Crafty266]

Video was very helpful. Thanks a lot!

[@PanyingPilot]

Excellent presentation!

[@YoGurlYvette]

Can i use the impact wrench bauer 64755 . Am I able to remove wheel nuts with it? I bought it for any emergency side road kit.

[@dancostaregni7631]

Yes

[@gpatz1992]

Impact wrench is all i need...👍

[@brianproffitt7263]

Can you use any of the m12 batteries with any m12 tool, I just started messing with cordless tools and I’m so confused they have like five different version of the m12 battery alone.

[@louie1086]

Thank you man. I appreciate this, i was about to use the wrong tool.

[@TheClippa1]

Good video. If you add one key you can customise the settings on these wrenches.

[@Lu-cho]

SHORT VIDEO AND GOOD EXPLANATION 👍👍👍

[@thee145driver8]

Can I use the M12 impact driver on my Lexus lug nut? Or do I need to buy the impact wrench? Thanks for your help.

[@dancostaregni7631]

Impact wrench

[@Lucas_McCain]

Super helpful. Many thanks.