Prototype for MC34063A Control Buck Converter Topology.

  Рет қаралды 558

RD Electronics Technology

RD Electronics Technology

Күн бұрын

This project is the use of IC MC34063A to control buck converter 20W (Continuous). the circuit and uses a power supply at an input voltage of about 20V and Configure the output voltage at 5V, control over current at approximately 1.5A. In the test circuit, the buck converter is supplied with a load current of 2.2A, 4.15A and a short circuit protection at the output.
Website : www.electronic...
Reference
www.onsemi.com...
www.ti.com/pro...
www.st.com/en/...
www.st.com/res...
mega-avr.net/fi...
www.sparkfun.c...
ridleyengineer...
www.maximinteg...
www.ti.com/sec...
www.onsemi.com...
www.onsemi.com...
#Buck_Converter
#MC34063A
#DC/DC

Пікірлер
Simple Synchronous ZETA Converter Topology based on Arduino UNO
3:53
RD Electronics Technology
Рет қаралды 574
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 3,4 МЛН
Good teacher wows kids with practical examples #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 13 МЛН
Let's build a voltage multiplier!
16:32
Ben Eater
Рет қаралды 2,1 МЛН
The most deadly project on the Internet
15:14
bigclivedotcom
Рет қаралды 7 МЛН
How to Make a Shunt Current Sense Resistor
11:17
ElectroBOOM
Рет қаралды 2,3 МЛН
Custom Transformer Shatters All Voltage Records (ft. 3D Printing Nerd)
21:23
Power For Your Electronics Projects - Voltage Regulators and Converters
37:26
DroneBot Workshop
Рет қаралды 1,2 МЛН
10 awesome application of capacitors in circuits
29:01
Electronic Wizard
Рет қаралды 406 М.