2007 - 2014 GMC / Chevy Radio Install Sierra, Silverado, Avalanche, Tahoe Suburban, Yukon, Impala

Parts linked in the description below!
Watch a full tutorial as a 2012 GMC Sierra will have a brand new Pioneer Double Din Touch Screen Radio installed. We will be using the Pioneer AVH-210EX bluetooth radio. This vehicle has the factory BOSE amplified system and steering wheel volume controls which will be retained.
This video applies to GM Vehicles such as Sierra, Silverado, Tahoe, Suburban, Avalanche, Yukon, Escalade, and Impala models for years 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014. This video also includes dash trim and stereo removal, radio wiring, programming, and installation.
*For the radio install Bench seat version of this truck, click here: • 2007 - 2014 GMC / Chev...
*For the front door speaker / tweeter install, click here: • 2007 - 2014 GMC / Chev...
*For the rear door speaker install, click here: • 2007 - 2014 GMC / Chev...
*For the 5 channel amp and sub install video, click here: • 2007 - 2014 GMC / Chev...
*For the back up camera video installed on this truck, click here: • 2007 - 2014 Chevy GMC ...
*For a tailgate backup camera install video, click here: • 2007 - 2014 Chevy GMC ...
*For the Crux wiring harness unboxing, click here: • Crux GM Wiring Harness...
*To see how to keep your factory DVD OEM flip down screens working, click here: • Keep your DVD screens ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*Pioneer AVH-210EX Bluetooth Radio: amzn.to/3vTBZOS
*Metra 95-3305 Double DIN Installation Dash Kit: amzn.to/2TNgGQY
*Crux Wiring Harness Adapter SOOGM-16 For Bose / Non-Bose Systems: amzn.to/2Rt0OCp
*USB / AUX Flush Mount Kit: amzn.to/2SYXEGS
*Metra 40-CR10 Antenna Adapter: amzn.to/3po1uWc
*Pioneer Parking Brake MicroBypass: ebay.us/RVf61w
*Pac USB-GM1 USB Retention Cable (If you have the factory USB port): amzn.to/3h3HowD
*If you have the factory flip down DVD player, you will need the Axxess GMRSAV OE Video Integration: amzn.to/3pprIra
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases

[@ProvoBeastAudio]

Parts linked in the description!

[@z71offroad2000]

do you know how to permanently disable the damb chimes in these trucks with bose sterio non big screen ?

[@ermannokenney8210]

@@z71offroad2000 e!ee!saaaaaaaaaaaeaaaaaaaaaaaaaaaaasaaaaaaaaaaasaaq!q

[@rubencruzgomez1702]

What part of country did you are

[@ProvoBeastAudio]

@@rubencruzgomez1702 Utah!

[@thedanceavenueia]

Do I need anything additional to incorporate my SeriusXM radio?

[@jeffp1338]

Will the Crux Wiring Harness Adapter SOOGM-16 For Bose and Non-Bose Systems retain the factory mic for Bluetooth?

[@Metatron9011]

Also have the same truck and the rear speaker stopped working shortly after they installed the radio. I want to install a new radio which I hope will fix the issue with the speakers. Pro-line the audio store that installed it didn't do such a great job. It was free so I didn't complain. Enjoyed it while it lasted.

[@domingogomez6937]

Okay I have everything hooked up and the radio works but when I hook up the Bluetooth no sound comes out?

[@jakekalina1990]

I am using almost EXACTLY everything parts wise you have listed in the video. Does the crux unit need to be programmed to retain the factory steering wheel controls with the pioneer unit or is it pre programmed? Also what about parking brake? Reverse light wire? Do those wire into the Crux unit/factory plug wiring or do I need to pull wires and wire into wiring under the dash basically a needle in a hay stack hunt? Please tell me it all wires into the crux unit 😅????

[@anthonygray6522]

Is there a Double Din Touchscreen that has Apple car play and can also retain all the features in a 14 Tahoe, (overhead monitor DVD player, steering wheel, etc) my Tahoe has the Bose system

[@scottplooster1315]

One thing worth mentioning that may not matter to everyone but it certainly matters to me... The Crux interface adapter does NOT support RAP (Retained Accessory Power). The Crux adapter is configured to keep the radio on until the key is pulled out of the ignition. If you turn the truck off leaving the key in the ignition the Crux will NOT shut off the radio when you open the door like the factory radio. The aftermarket radio will be on indefinitely likely causing a dead battery. If you ALWAYS take your keys out of your car probably a non-issue but for me it is a non-starter.

[@lowhelium]

Thanks for this is a bonus for me!

[@robertatkinson6864]

Who the heck leaves their keys in the ignition indefinitely? 99.9% of all people take their keys with them, so this is a non-issue for nearly everyone but you.

[@mpomedic1]

Got a 2013 Suburban LTZ OnStar AM/FM/XM/Navigation/Bluetooth, putting a JoyBring aftermarket, using a PAC RP5-GM32, wired per installation instructions, plugged in Radio works BUT no sound. Any suggestions to get it working?

[@Chrishaeee]

Same problem

[@martinalcantara6380]

Great and explain in all you videos. thank you!

[@tjburke46]

When installing this aftermarket radio, did you have factory remote start? If so, did you retain that or lose it?

[@Luminous.Dynamics]

Factory remote start? How does it work? Is there a button on the remote or do you have to press a combination of buttons?

Did you install the Pioneer parking brake micro bypass in this video? Is it needed with the Crux unit?

[@blown383hotrod]

Quick question have you made a video changing from factory Chevy touch screen to aftermarket touch and keeping factory back camera and over head DVD player. Plan on changing factory radio in my 07 Chevy suburban

[@jimpowell9205]

What do you recommend for my 2011 Buick enclave? My goal is full navigation features, as in the OEM nav/radio.

[@donchuyplays9448]

I have a suburban but when I take off the factory radio it has three harnesses, did yours have 3? I’m lost

[@ifragisk]

I did not buy the S00GM-16 because it is very expensive. I don't have steering wheel controls but I do have an Onstar mirror that i don't care for or use. I bought a dash kit, antenna thing and a Red Wolf wiring harness that is compatable with the truck. Do I really need the SOOGM?

[@Tyfixisall]

This is what i was looking for, I have the same truck and want to upgrade the radio, thanks for the info!

[@mountairymobile3301]

the tuner is not available any longer can I use Pioneer AVH-221 EX for the same application

[@darrylthornton5377]

Great video! I see the pioneer radio that you used is out of stock. Do you have any recommendations for an alternative radio where in can retain factory options as listed in this article? Thanks

[@mountairymobile3301]

bluetooth mic you plugged into the unit.... is on the crux /?? where is that coming from on the truck??

[@AJ-nd2rs]

Hi I install a sonny radio on my 2008 GMC Sierra 1500 Everything looks good besides the steering control Any idea what else do I need for it?

[@jrleon2937]

Your truck had a reverse sensor, if so, could you tell me how you insist on keeping it since I installed the stereo and it lost that function, thanks

[@sethmcclain9956]

Can you please tell me where to tie the parking brake wire into? I have a 2012 sierra 2500 and I bought the Scosche interface

[@leonhernandez4591]

I was trying to upgrade stereo in a 09 Chevy Suburban having trouble connecting to the reverse camera Factory a steering wheel control I am using install Kit Crux model dkg m49 you have any advice on what may be going wrong

[@adamlewellen5081]

I use a old mess kit knife for panel work. I've heard the security system is ran through the radio an can cause no Start issues.

[@GerardoPena-u6f]

Okay would it be similar for a 2008 gmc Yukon Denali already has touch screen but I want to update it aswell how would it work with the Navi?

[@jonboy5669]

What controls the volume buttons on the steering wheel? The previous owners installed a stereo and the backup camera/steering wheel controls don't work.

[@michaellove242]

I did this exact kit in m 07 avalanche with bose and my steering wheel controls don’t work. Is there any common issue I may have overlooked?

[@ProvoBeastAudio]

Wiring or dip switch wasn’t setup correctly.

[@danhendry7496]

My Denali has Bose, thanks for this video!

[@Catholic1391]

Ok I bought another wire harness for navigation factory radio, this one fit only problem now is my antenna adapter won't fit? on 2013 Chevy Tahoe LTZ.

[@manuelpecos5173]

I just ordered this set up for my 2013 silverado and wanted to ask where you connected the pioneer micro bypass listed in the description?

[@manuelesquivel2107]

Update please

[@laxbaird]

I have a 2014 Yukon Denali XL 1500 with the Bose dvd navigation. I have a giant connector and 6 other connectors that don’t look like what is in the video. I am not sure the wiring harness is right for my vehicle. Do you have any idea what I need for this one? I have been lookin everywhere and cannot find the right harness.

[@billybones7121]

Would the “Pioneer AVH-211EX” substitute for the “210”? thanks!

[@AntoineFinch]

cant find a 2010 suburban video anywhere? my radio looks nothing like this what else is different?

[@carlmichael851]

What routing do you have to do if you have a rear camera already in vehicle stock?

[@ledman602]

The micro bypass is no longer available on Amazon. What is it and is it necessary? Thanks!

[@mountairymobile3301]

I don't have a bluetooth on my truck ... so can I still answer phone calls???

[@MrTSoukup76]

Any recommendations to do this kind of work in the western suburbs of Illinois?

[@ranelsr]

I did an upgrade on my 2012 GMC ACADIA RADIO, from stock to touch screen.. taken from a 2010 Acadia.. mine truck doesn't have Radio Module Interface an like two other connections cable..can you check it out and let me know where I believe is the only two large cables runs to from the radio? Thanks much..

[@nigelabram6041]

I just bought my 2008 Tahoe last Xmas and I just installed my second aftermarket stereo. I keep having issues where the day after I have the new one installed (at two different businesses,) the radio takes 15+ mins to get power and turn on, if it turns on at all. I was wondering if anyone else has had this issue, and if so, what was done to fix the issue?

[@anthonymacias5870]

Can you fly out and hook my system up!😂

[@marcusmorgan1361]

I'm having a problem with my 2012 chevy Surburban, my new DVD Stereo player is hooked up. But my 2nd and 3rd row tvs aren't working or turning on. So you have any clue

[@MrAwsomeshot]

so you only need this single module from crux compared to the 2 different modules if you go with the Axxess from the original video? this one retain the chimes too?

[@ProvoBeastAudio]

Crux is an all-in-one module for a better price, where Axxess / Metra requires two separate. Crux retains all your chines and factory Bose as well (if equipped). Better solution!

[@Catholic1391]

Nice video this help a lots thanks. Only one question, I got two Amps one for my Subwoofer, and a 4 channel Amp, am going to used RCA for those two amp. Do I unplug the factory bose amp and will my will my second screen for the kids still work?

[@ProvoBeastAudio]

It will using the right adapters: kzbin.info/www/bejne/h5jHnZaKe56bprc

[@natejohnson8073]

Hey I have a 2014 Denali with nav I have changed radio out with a Pioneer DMH-WT7600NEX and I’ve got everything for factory stuff it still work but my rear entertainment tv powers on but no picture do you have any idea why???

[@mexicanbeast221]

I installed this harness but steering controls are all wanky. Buttons don’t correspond to the correct thing. Any ideado.

[@nickfoo5125]

This is awesome! Will the rear DVD screen and controls still work if I input a head unit with DVD capabilities?

[@ProvoBeastAudio]

Yes, with the right adapters: kzbin.info/www/bejne/h5jHnZaKe56bprc

[@donniebrown4368]

Thanks for your help buddy .I have one more question for my radio I got my first one and it came in with a busted screen are or is it replaceable or can it be fixed? Thanks again

[@ProvoBeastAudio]

Not worth repairing. Suggest replacement.

[@donniebrown4368]

@@ProvoBeastAudio They didn't want the old one back so I thought I could maybe try and maybe replace the screen? Any suggestions?

[@jesusjcastillo91]

What plug did you use and can i still use the steering wheel controllers whit it

[@mindypatten3556]

What size touch screen should I put in my 2011 impala without the screen over lapping

[@baker48man]

Thanks! Any great suggestions on adding a microphone? How to remove trim to do that?

[@stevemollis5416]

Does that vehicle have rear climate control behind the center console? Did you lose the climate and radio functionality back there?

[@ProvoBeastAudio]

This vehicle wasn't equipped with them, but as for radio controls, they become obsolete behind the center console with a new radio, but the climate controls should still work.

[@2wdDenali]

Is there a link for the adapter using factory nav?

[@mattdiaz3183]

Hey great video! Your content is super helpful! Here's my issue. I have a 2012 Suburban LTZ with Bose and Nav. Installing the Pioneer AVH-2550NEX with the Crux SOOGM-16 interface. The connectors on the interface don't match the connectors on the vehicle. Like, not even close... Any advice?

[@coledaddy818]

Any luck

[@ProvoBeastAudio]

Hey there, if you have factory NAV, you probably need the Pac RP5-GM32 based on your year and trim: amzn.to/3R4aoFs HOpefully that helps!

[@laxbaird]

Did you ever figure this out? My connectors are way different as well and one is quite large. Same problem as you possibly, did you find the correct harness?

[@willyrazo6359]

Do you have a video on replacing the Bose amp

[@ELMACHETERO.40]

question, is loud using the built-in amplifier with the aftermarket headunit or no

[@w.a.johnson146]

The retains the Onstar but you said it doesn't retain navigation so if Onstar sends directions to my truck, it wont read out anywhere like on the radio display and it wont show on the radio GPS correct?

[@BenFineburg]

This will be my first attempt at something like this. Your video is super helpful. What size heat shrink tubing do you use?

[@ProvoBeastAudio]

Sure thing. We used 1/8 2:1tubing.

[@DavidDavid-sp6im]

nice man.

[@fudenciojp9676]

Hello there i have an extra cable without pair it's the yellow with black line that says mute where should i connect that on the crux the radio is a Pioneer AVH-W4500NEX thanks?

[@ProvoBeastAudio]

To the radio’s yellow / back wire. If it doesn’t have a mute, just cap it off as it won’t be used.

[@fudenciojp9676]

@@ProvoBeastAudio thanks and happy new year!

[@jmx3v324]

I have a 2007 sliverado ltz with factory Nav and Bose will this all fit on a 7 inch pioneer?

[@ProvoBeastAudio]

Any standard double din radio.

[@samuelgross2904]

I can't find any aftermarket options for a 2008 silverado ltz with a factory touch screen and navigation. I want to replace the factory unit to a dub din but there is no videos on it ? Any information would be greatly appreciated

[@ProvoBeastAudio]

It's the same process and parts listed in the description of the video will work great on your install.

[@brentaversano8121]

I’m looking for a stereo that would retain my rear DVD entertainment system and upgrade to better Bluetooth capability do you have a model that you suggest

[@jmx3v324]

We’re do I connect the parking brake micro bypass on this harness?

[@frankie3591]

Do the OEM wires match CD player to OEM dvd player I find at a wrecker?

[@luislemus6204]

is the adapter supposed to make the turn signal sounds?🤦🏻‍♂️

[@ProvoBeastAudio]

Depends on how the turn signal was generated with the factory radio. If those sounds were created and played through the factory speakers, then the harness will replicate that from the smart module itself (not through the new radio). If the noise was created from a separate dedicated speaker behind the dash, then it will continue to function as such.

[@leegraham2206]

The 2009 radio had Bluetooth so can you install in a 2008

[@Flashflood140]

Thank for the link this one is much better

[@shawneehaggard7764]

Do you have to use the Bluetooth mic or can you use the factory built-in mic?

[@ProvoBeastAudio]

Factory mic is on its own protected circuit so usually the new aftermarket one is required (analog style)

[@Here-n-there1984]

Does it need a noise filter too, or will the interface takes care of that ?

[@antoniop5889]

Is there a reason u used crux harness instead of the metra on the last video??? Trying to decide wich one to get

[@ProvoBeastAudio]

Better price, comes pre-programmed, easier to install.

[@rbhhbr5022]

Do they have a usb-c flush adaptor?

[@clintgomes8477]

Could you please list what USB cable adapter is needed to plug into the existing charging port to turn glovebox USB into a charger?

[@ProvoBeastAudio]

amzn.to/3h3HowD

[@jmx3v324]

Would this work on my 07 ltz with all the features and will my factory remote start work and would a aftermarket amplifier work too?

[@Luminous.Dynamics]

How do you make the tahoe start with the remote?

[@ianridgeway3721]

can i use an aftermarket amplifier with this? say im using a skar 1500 class D amp. will it work?

[@ProvoBeastAudio]

Sure, any amplifier as the radio has RCA pre-outs.

[@tylertucker4478]

Can you not use the trucks factory mic for hands free for phone?

[@deweygoodman3226]

Which plug did you use for the steering wheel controls. I see it was the 3.5 jack but which plug did you use on the back of the radio?

[@ProvoBeastAudio]

Follow the crux instructions based on the radio brand you have. Our pioneer had a 3.5mm W/R steering wheel control input port where we made our connections. If your radio brand does not, refer to the crux instructions on how to connect them to your radio.

[@GHaze19]

If I have the rear entertainment system, and dont want the dvd to play on my front screen, do I need to use the bypass relay?

[@Do_We_Exist]

Been trying to figure out this radio out that i bought Pioneer AVH-120BT. I have a 2012 seirra, for some reason the radio stays on the entire time. I bought the Metra GM29-SWC, following the wiring diagrams its correct. I can't seem get my steering wheel controls to work. Any help would be appreciated, I've been looking all over online and I am either missing it or I can't seem to find what I did wrong.

[@VooDooChild7300]

I know it’s been a while but do u remember what u did to fix this problem

[@Do_We_Exist]

@VooDooChild7300 the main/accessory power was messed up in my truck. I had to swap those 2 wires out, and it worked like a charm until the truck met its bitter end.

[@sumblwnup8695]

Small crowbar from Home Depot worked well with me for removing that stainlesss steel plastic bit in the start, however I went a bit too far in and destroyed the plastic where the screws go in for the Air conditioning controls and one of them popped out

[@robertatkinson6864]

If you damaged the AC controlls then a crowbar didn't actually work so well, did it?

[@sumblwnup8695]

@@robertatkinson6864 the dash was already super cracked so I’m Not surprised

[@isaacbarnett7341]

Ok, I have a 2010 Chevy Silverado no navigation it does have an onstar button. Can I just get a wiring harness or do I have to get the interface? I miss old school stuff lol.

[@ProvoBeastAudio]

You will need a smart harness to do it right since accessory, illumination, etc. runs over the canbus of the truck.

[@KCPmedias]

I did a radio install on my 2007.5 GMC Sierra 1500 slt and I had two hook ups and the antenna hook up, my Bluetooth connects and says the song is playing but no audio is coming out the speakers. However when you play the local radio the speakers will work

[@robn7372]

My door chime out of the tweeter is extremely loud and static but plays music fine any advice ?

[@97thmaco35]

Will the dvd player piece go with the wiring harness in this video?

[@billylopes9711]

My pioneer harness came with a mute wire, but nothing on the crux. Do I just tape it off?

[@ProvoBeastAudio]

Yep!

[@stevenmeneses9127]

Just watched your video on the 5 channel amp speaker upgrade on the tundra Using the kit from taco tune. Someone asked about why you left the factory amp which you replied saying Incase they wanted to go back to stock. My question is, can the factory amp be removed to mount the LOC in its place. I plan to do everything you did in that install but just not using that taco tune kit. I will use there T Harness but that’s it. I just want to confirm removing the factory amp and tucking the connectors away I won’t have any issues. Btw you guys do great work. 👍

[@jrvega2415]

Would I use this harness if mine comes with factory navigation?

[@SocalTankless]

you forgot to add link to the usb adapter for center console.

[@timgasperson4063]

I'm curious, what purpose does the usb/aux mod serve since the radio has bluetooth?

[@ProvoBeastAudio]

Apple CarPlay, android auto connection.

[@prclez1851]

Can it work with a touch screen aftermarket radio that includes gps, not factory for 09 GMC Sierra ?

[@tylertucker4478]

And it will Bluetooth to my phone right?

[@stkgta402]

I got the same radio on '11 sierra and after the installation cruise control won't engage any thoughts?

[@ProvoBeastAudio]

I'd remove the negative off of the battery and do a full reset. If no success, reinstall the factory radio to see if the cruise control works.

[@willmartin8820]

I do have a quick question. My friend installed a aftermarket radio in his 2008 GMC Sierra. Use all the correct harnesses and retained his steering wheel controls and when he went to work this morning his truck was dead. What could be the issue? He told me his radio would stay on after shutting his truck off and would kill his battery..

[@ProvoBeastAudio]

Sounds like a wiring, harness, or radio issue. If the radio remains on, sounds like a wiring issue or the smart harness is bad.

[@Gaelioch]

I as well had this happen. I installed everything, double, triple, quadruple checked, I even carefully hooked it all up before I heat shrink and taped it to make sure everything worked right. It worked right! But after tested to make sure it all worked, I screwed it all in and put it all together, my truck had died in that amount of time being hooked up to this radio. Any idea why it would have happened like that so fast? What is connected that it is draining the battery so fast? I also got a warning to check/service stabilitrack moments before my truck completely lost all battery power. I turned on the radio to finish configuring time and settings, and it literally was it these few minutes that my battery had completely went dead. I’d love your input, if possible something a little more specific than some general advice. Thanks for tour help, this video was awesome!

[@thehodgescrew6080]

This may be a dumb question but how to you play video if the radio does not play cds... I have the rear entertainment and an apple phone which the radio I installed has apple car play... what platform or function do I use to watch videos on the rear entertainment system

[@ProvoBeastAudio]

Check out the HDMI adding video that will help You there. Also you can play media from A thumb drive.

[@fyrfyter55]

Could please list what USB cable adapter needed to plug into existing charging port to turn glove box USB into a charger?

[@ProvoBeastAudio]

Pac USBGM1: amzn.to/3h3HowD

[@gskills]

if i dont have factory bose where does the plug go at 7 mins 5 seconds... i do have steering wheel controls and the same old radio you removed. i have a 2008 burb thanks

[@ProvoBeastAudio]

Just plug it into the "non-bose" port.

[@shawngoodwill4351]

Hey can you guys direct me to where the factory plug for the factory rear camera in a 2013 Avalanche? Some say it’s under the seat, or behind the glove box. Then I’ve seen a video of splicing into a wire under the dash. I really don’t wanna do that but I wanna keep my factory camera with this aftermarket radio.

[@jeffbezogian9254]

Tried to do this same install on my 08 yukon xl, radio works but for some reason the rear dvd system is showing the main screen for a dvd but once I hit play the movie just plays, with the same screen. I used all parts you put in the description but I cant figure it out.. I also did the micro bypass and the front unit still said something along the lines "it is prohibited to watch videos while driving." What the heck am I doing wrong?!?! Thank you!

[@kick_then_shift]

You can only watch videos with the parking brake set if you wired up the I believe the pink wire. I just disconnected the pink wire "ebrake wire " and can watch tv when ever

[@2016-m1h]

Steering wheel controls work ?

[@stevencasares8373]

If you already have the GM backup camera that goes to the rear view mirror, does this re-route it?

[@bernardogarcia7351]

Did you figure it out ? I’m in the middle of it right now

[@olajuwonshonoiki4395]

@@bernardogarcia7351 you just need this Axbuch-gm29. Plug and play.

[@itzfousey2936]

Will my back screen dvd/cd player still work for movies etc?

[@ProvoBeastAudio]

Not without the Metra Axxess GMRSAV OE Video Integration: amzn.to/3pprIra

[@07Ranger]

Did this vehicle have the overhead screens for the dvd player ? If so, does it still work with the aftermarket head ?

[@andrewilliams7732]

This deck isn't the DVD version