2007 - 2014 Chevy GMC Stereo Install Tahoe Suburban Yukon Impala Avalanche

Parts linked in the description below!
Watch a full tutorial as a 2009 Chevy Tahoe will have a brand new Pioneer AVH-X5700BHS Double Din Touch Screen Radio installed. Note that this Tahoe is the same install as a Suburban, Yukon, and Avalanche. In addition, this install includes wiring steering wheel controls and retaining the factory rear entertainment flip down DVD system. This vehicle has the factory BOSE amplified system which will be retained.
This video applies to Chevrolet Tahoe / Suburban / Avalanche / Yukon models for years 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014. This video also includes dash trim and stereo removal, radio wiring, programming, and installation.
Click here for the updated video of this install:
• 2007 - 2014 GMC / Chev...
For just the unboxing of the Pioneer AVH-X5700BHS unboxing, click here:
• Pioneer AVH-X5700BHS D...
For the back up camera video, click here:
• 2007 - 2014 Chevy / GM...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate Paid Links)
*Pioneer AVH-X5700BHS Bluetooth Radio (Discontinued).
---Suggested radio: AVH-2500NEX: amzn.to/3z8L9Ju
*Metra 95-3305 Double DIN Installation Dash Kit: amzn.to/2TNgGQY
*Metra Axxess GMOS-LAN-02 LAN BOSE Amplified Integrated Harness: amzn.to/3ckmxn8
---Use GMOS-LAN-01 for Non Bose / Amplified Vehicles: amzn.to/3wZj7y6
*Metra Axxess ASWC-1 Steering wheel control module adapter: amzn.to/3ilRprp
*USB / AUX Flush Mount Kit: amzn.to/2SYXEGS
*Parking Brake Bypass Relay: amzn.to/3cmvNaB
*Metra 40-CR10 Antenna Adapter: amzn.to/3po1uWc
*Metra Axxess GMRSAV OE Video Integration: amzn.to/3pprIra
Disclosure: As an Amazon Associate I earn from qualifying purchases

[@ProvoBeastAudio]

Parts linked in the description! Check out the updated version of this video here: kzbin.info/www/bejne/mKHOYoChn9Z2kJo

[@davidharris90]

Will all the harnesses in ur video work on a 2007 Chevy avalanche

[@christophernoe5367]

Best video for the GM install. Using as a small guide for my 2009 Silverado. Same set up except for the video wire harness. Great work! I'm used to the old school stuff where it was just one small harness so this is a God send.

[@JamesOKeefe-US]

I have used this video so many times. It is an absolute lifesaver. Thank you for this!

[@ProvoBeastAudio]

Sure thing. You should check out the updated version: kzbin.info/www/bejne/mKHOYoChn9Z2kJo

[@zombie21boy]

I sure could use your help in installing my aftermarket unit.

[@jeremymonthony9265]

I guess this is worth a shot as I see you"ve been clutch in offering others solutions to wiring issues in this comment section. I just finished installing a JVC KW-V250BT in a 2011 GMC Sierra 1500. Non-amplified. Used GMOS-LAN-01 in conjunction with ASWC-1 Everything is working as it should except that I have no steering wheel controls. I went throught the GMOS initialization as instructed and then the ASWC-1 as instructed. Everything seems to be correct as I end up with a solid red light on the ASWC unit. Started with the rapid green/ red flash while I tapped the vol. up button on the steering wheel. Following that I get the 7 green flashes followed by a series of red and then a solid red light. According to Axxess instructions i think that means I should be all set. No such luck. If you or anyone can provide any insight, i'll be grateful.

[@steelrain210]

Very well detailed sir. Looks amazing. Thanks for making this video.

[@LushikuteZikatojirik]

I’ve been searching everywhere for a 7” touch screen double din install bracket, I really hope this one works!

[@ProvoBeastAudio]

Works well.

[@LushikuteZikatojirik]

Provo Beast Audio Installation it doesn’t work, I had to downgrade to a 6.2” touch screen. Didn’t want to have to do a bunch of modifications

[@Blck_tsunami]

Links to everything would’ve been clutch

[@ProvoBeastAudio]

Links change, but parts listed in description. Here is also an updated version of this video: kzbin.info/www/bejne/mKHOYoChn9Z2kJo

[@UnchainedByMercy]

Pretty sure "clutch" is what they call that 3rd pedal..... Could be wrong, jmho...

[@Blck_tsunami]

@@UnchainedByMercy womp womp womp

[@UnchainedByMercy]

@@Blck_tsunami badum dashoom!!

[@freddievilla6471]

Those look like a lot of wires to put back in the little compartment behind the radio. I know it’s pretty tight as far as room goes already . Is there a certain way to tuck them in where you don’t have to cram the radio back in. Tks

[@gjergj680]

Very nice video! Thank you for sharing. Does the rear screen work like stock with the remote and sound running separately through the wireless headphones while the driver listen to something else through the speakers?

[@ProvoBeastAudio]

Typically the headphones will no longer work when you replace the stereo. However, i cannot confirm that as this was a customer vehicle and i only had it in my possession for a few hours.

[@FRUITSAMURAIX]

Amazing how flat the back side of car stereos are now flat also. Compare to the bulky metal piece in this video.

[@paulthaauthur7986]

Real Nice kool and clean

[@MrAwsomeshot]

I am loving these videos super helpful! At least the dash trim is easy to get off haha. First aftermarket install I did was on a 93 chevy beretta, it took 9 crimps and it was done haha.

[@victorjbarker]

Does this allow use of the factory IR head phones with the movie system. Does the rear radio module still function with plug in headphones?

[@danny117hd]

Thanks I'm hoping to get an avalanche this year.

[@bedhead-tb4qg]

Why lmaooo

[@HDtone23]

6:44 grey harness part #?

[@cjls1z28]

You forgot to add Escalade ,Sierra and Silverado to the description. Great video

[@ChicaGOrilla4CHN]

great video, very informative. I too have a pioneer (x4700bs) and an '07 tahoe LT. I followed your directions piece by piece and everything seems to be working correctly except audio. I hear very little sound. I have to turn the volume all the way to the max just to hear the music, to which the music is still very faint. funny thing is I can connect my subs and the bass plays perfectly. Any suggestions where to start looking, or any ideas what may be interfering/setup incorrectly? I've played around with this thing for hours, exhausting every setting

[@ProvoBeastAudio]

You need to adjust the gain on the Metra Wiring Harness, there is a little knob to adjust and you need to turn it up. That will solve your low volume issue.

[@ChicaGOrilla4CHN]

Provo Beast Audio Installation yeah, that was one of the things I've adjusted it and although the volume does slightly increase, the volume is still low. I have all of the correct speaker wires connected... stripes to stripes and solids to solids. I'm starting to think maybe I have a non-speaker wire incorrectly hooked up because this morning while driving to work, when I put my turn signals on, I can hear a "ticking" sound coming somewhere from behind the unit. Also, not sure if this matters, but when I disconnect the remote wire connection, I no longer hear any sound? Any ideas? Especially about the turning signal "ticking" behind the unit?

[@ProvoBeastAudio]

Do you have the mute wire hooked up? If so, that would cause the same issue. Mute is usually yellow with a black stripe.

[@ChicaGOrilla4CHN]

Provo Beast Audio Installation​​ following your video, I did have that mute wire connected but even disconnecting it made no difference. I borrowed a volt meter to check the current flowing to my headunit harness and all of my essentials are pulling power.. yellow (12v), red (12v), speakers (5-6v) etc. What's interesting is if I remove the tray underneath the cup holders (in the middle console) there is another harness underneath, and from there I can tap into the rear speaker wires. When I do that, the back speakers work just fine. So I ended up disconnecting everything to the radio harness but the yellow, black, and speaker wires and still nothing. Actually, whenever I disconnected the remote wire (blue and white), the low sounding speakers stopped playing completely. I got so desperate I even disconnected the steering wheel control module and the GMOS-LAN-02 device. After doing so, with only yellow and black connected to the radio, I took 2 of the speaker wire from the radio harness and touched the speaker pins on the input terminal to the GMOS-LAN device and the speakers play fine. At this point, I don't even know what to do anymore except manually connect the harness speaker wires.. which I shouldn't have to do because this $100 device is supposed to do that for me. I literally almost have the same year tahoe as the one in your video (2007) as well as pioneer radio (x4700bs) with the same accessory hookups (GMOS-LAN-02 and ASWC-1). So I don't understand why I'm getting different results from you. Can you make sense of what I've explained?

[@ChicaGOrilla4CHN]

Also, for anyone else wondering, that "turn signal clicking" sound that was coming from behind the headunit is the little relay-looking plug on the GMOS-LAN-02 wire

[@daniellucker]

Thanks for into doing this in about 30 mins

[@mohammedal-hineai4253]

Great video thank u for it. I need to install AVH-Z5050BT in my GMC Yukon 2012 so can you plz help me to order the right harness cable from Sonic web site or Amazon?

[@TheBigGreentv]

Mohammed AL-Hineai me to

[@ManuelCamarena0725]

Best video I’ve found. It’s my third one watching. Will be installing a double din on my sistsers 07 Tahoe, I’m not sure if it has a factory amp or rear flip down screen though

[@mac9955]

Great video, my only complaint was the herky jerky back and forth, I threw up twice.

[@randyandrews1827]

What about antenna adaptor

[@BobaJett]

Does this aftermarket wiring harness accommodate factory backup cams??

[@gomd3rd]

Super clean install. I would’ve just shorten the wiring harness a bit but dang that looks good.

[@cruxinterfaces]

Very informative and well done, if you want to see other great 12 volt videos Thank you for the content

[@melissareagan1860]

Everything works fine except there's no retained memory every time I shut the car off and turn it back on I have to reprogram the radio. What did I miss?

[@Ryker_66]

Thanks for the info! Made the job so much easier

[@falhawker]

Forgot to add how pain in the neck it is to make the wire harness fit behind the stereo lol .. Great Video 👌🏼

[@MrJsymons78]

That's the trouble I'm having now. I think I'm gonna have to cut out some of the inside of the dash so all my wires will fit

[@lyndonmarie868]

The harnesses for xm radio seem to be expensive and dont work very well....thats why i assume people just get a tuner and antenna and install themselves.Thanx for your help anyway, great videos....!!!

[@760escokalifastlan]

Great video. I've used it. It's just that he forgot to say you also need the stereo harness kit.. But great video. Thanks

[@OP-ik7qb]

Alejandro Torres he didn't show it in the video?

[@bdub4eva]

My radio isn't turning on. I don't have an amp in vehicle, but truck isn't getting sound loud enough. I followed your video to a T. My truck is a 2007

[@joey537]

U dont need a bypass module. U just connect the parking brake wire to the ground. Thats what it does when u have ur parking brake on, it touches ground

[@ProvoBeastAudio]

Not for Pioneer as they require a double or triple pulse negative. Do your research before commenting.

[@brodyhope9765]

I got my stereo all hooked up and everything works. My problem is getting all the wires to fit behind.

[@garylawson5230]

I have a 2013 Chevy Tahoe with no navigation and I want to add the navigation but I want the back up camera to come thru the radio. But I have the back up camera in rear view mirror

[@louisgreenberg5384]

pac-05 will keep all rse controls in the back work plus the IR

[@adafernandez5105]

I just recently installed a Boss stereo in a 2011 suburban and just wondering why I can’t retain the rear dvd and the power steering controls also. Thanks

[@philly440]

the installer did great but why do aftermarket radios always have to look like they just don't belong?

[@AntoineFinch]

THANKS A MILLION 07 SUBURBAN LT KENWOOD DDX 394

[@brice191988]

Antoine did you use the aswc1 if so how did you hook it up

[@jessy12251able]

After the new install, are you still able to watch the movies in the back and listen to the music in the front at the same time?

[@ProvoBeastAudio]

It depends on the radio you purchase. IF you want that feature with the new setup, you need a radio that has the "Dual Zone" option built in.

[@HDtone23]

@@ProvoBeastAudio hey what mounting bracket did you use for your 7" pioneer?

[@johnrweiss]

What if i dont want the movie on my screen but just the back screens?

[@Casamigo.Angelo]

Hey man I am wanting to purchase this since my factory radio went out. I have a 2014 Chevy Tahoe Lt, with dvd , Bose and a factory backup camera in the rear view mirror. If I buy this stereo how can I hook it up to factory cam

[@MrRdrgz63]

I ordered the Metra Axxess GMOS-LAN-01 LAN, but instead I got the AXDIS-GML29. Is this the same interface or what?

[@laxbaird]

My dvd player had 7 connectors into the back and my new wiring harness does not plug into the factory connectors. I can’t seem to find anything that will work with my system. What am I missing?

[@toothlessdaclown]

Were you able to keep the rear entertainment functional with the aux ports and everything?

[@ProvoBeastAudio]

Yep!

[@xeondxb]

360 can work with this unit ? What model you will recommend for avalanche 2009 this model with touch screen backup camera with mic and head screen ? Last question if I want to install 360 backup camera with you recommend unit ?

[@paulrhodes4458]

Why didn’t you shorten the wiring harness before installation

[@sirslickrock]

I may have been said already but, the Microphone (for calls and what not) is already in the truck. It’s right by the front map lights and dome/door light control switch. it is in the slots closest to the driver or centered (I have mine centered but a guy in my unit has his closer to the driver) Great video though.

[@jessabingel180]

What if the after market radio doesn’t have a cd slot can i still play movies to the back seat?

[@tracyjames4125]

Very cool, I'm gonna do sum up grades to my Ava an this may help, thanks for posting

[@markevans6901]

Just installed the Q80PRO into a 2011 GMC Yukon with the Bose Speaker option. All went well until I tried to connect the C connector to the head unit. When I did that, all I got was something that sounded like a ground in all speakers. When I unhook the C connector. The unit works beautifully, but only to the Front Speakers. All the other functions appear to work. Has anyone seen this before?

[@InsantexTube]

my 2012 tahoe ltz is completely different plugs and every kit that says it works have the wrong plugs any idea i have the bose system but no one has any info on it

[@nunezcesar0475]

Hi can you give me the list of parts I need to connect a pioneer receiver on a 07 Silverado classic with steering controls and the delay for the chime please

[@ProvoBeastAudio]

Go to sonic electronix and use their vehicle fit guide. They will guide you though all necessary parts for your install.

[@jamesjackson5448]

Hell of a job Sir

[@ProvoBeastAudio]

You should check out the never version of this video. kzbin.info/www/bejne/mKHOYoChn9Z2kJo

[@Johnlacascia]

1st. Where were you able to shove all those wires and boxes in the back of the dash? 2nd does the factory trim work with that double din adpater. My dashbezel does not fit anymore.

[@ManuelLopez-hy2tu]

Hello, I have a question where I can connect the cable that is blue/pink wire to the vss/ speed sense wire on my gmc Yukon Denali with navigation 2014.

[@Rolltidedallas]

i’ve done an aftermarket radio but i get a lot of alternator feedback whine, i have a 2010 suburban (Bose) non touch screen

[@ProvoBeastAudio]

Could be a few things - poor quality radio, bad grounds, bad RCA output PICO FUSE issue, bad harness adapter.

[@sait727]

Hello! I have a Chevrolet Avalanche LTZ 2010 and I bought a double din Android 10, Eonon GA2187. I would like to know if I will need the micro bypass in order that the rear monitor of my truck works.

[@jajuanpepper1634]

Can you show a parts list for everything used I got 14tahoe

[@TheJrayp3]

My rear speakers are not working after installation… any thoughts? Haven’t tried new speakers yet

[@devinmorris1799]

I have a 2014 yukon denali and the grey harness is not the same as yours is there a different harness i could use to retain my rcas in the back?

[@paulsabong]

How did you tuck in the harness with the bulky boxes?

[@hurtzdonut13]

hey i have an 07 Yukon xl with the rear DVD system when i plug the wire harness in i get no sound but when i touch the remote (amp) turn on from the radio harness to the power antenna on the other side of the harness i get sound but there is feed back.. how do i get sound out of my speakers with out touching the power antenna???

[@chadillacsays8782]

2008 avalanche, a friend installed a touch screen for me and now I have NO radio. I bought some wires for it and installed myself but now it tries to keep giving me a back up camera? I noticed he taped multiple wires together. Would that short stuff out?

[@gixxer4eva]

Where can I find the back up factory camera wire. It is currently wired to the rear view mirror screen.

[@marcusmorgan1361]

I'm having a problem with my 2012 chevy Surburban, my new DVD Stereo player is hooked up. But my 2nd and 3rd row tvs aren't working or turning on. So you have any clue. Can you please help me.

[@michaelperugini4199]

what if you have double flip down DVD view screens ? (2013 suburban) does it require yet another cable Or does that one RCA type connection work for both screens? and what about the wireless head sets? are those tied to the radio? to the screens?

[@ProvoBeastAudio]

As far as i know, the one cable works for both screens. Secondly, typically the wireless head sets only are retained with the factory radio, not the aftermarket ones unfortunately.

[@jasonkilgore6418]

Bought everything here you have listed but cant get overhead video to work at all

[@tbacio]

Curious as to if you know whats the best place to run the ACC wire on an aftermarket stereo in a 2007 Chevy Silverado 1500 new body style with out using the harness adapters?

[@ProvoBeastAudio]

Fuse box

[@scottconnell1128]

Hello the purple with white wire in the pioneer harness gets hooked to what wire on the OnStar adapter? My factory rear view camera doesn’t want to come on and I am using the brown adapter harness. Anything I’m missing?

[@dannyevans6268]

Can you still use the factory headphones with this installation

[@ProvoBeastAudio]

Yep!

[@clarencebarrett202]

How much do that Aux cost on Amonza . N the part number . I have a 2007 youhon but I really don't want to Change my Radio to play my music on a Flash Drive

[@zekevillarreal2694]

Are the same steps needed for a 07 Tahoe with factory nav/touch screen double din ? I have yet to find a video to give me info. I’ve seen nothing but videos like this Tahoe head unit.

[@Johnfenger11]

Is there a connector or device that you are able to listen to the radio in the front and still be able to play a DVD in the back using wireless headset from the factory,

[@Hrledood911]

I am gonna do a radio upgrade for my wife. It's a Kenwood unit that is in there now. The unit was there when she bought it the Yukon used. Is it safe to say(without pulling the unit) that if the steering controls work, it has the module already there? Also, the backup camera is working and its the factory camera that displays on the rear view mirror. I'll need to reroute that to the new unit. Is that easy to do?

[@dantecox1690]

I have a question? What is the possibility of maintaining/adding any harness that works factory Satellite Radio or would i need to purchase a new satellite antenna?

[@michaeljordan1546]

I have a 2013 suburban will the rear control still work for the radio will heated seats still work will remote start still work will rear a/c control still work has a Bose system

[@ThatJerkFromCali]

Can you just install the steering wheel control interface if you do not wish to retain Onstar

[@oddduck2298]

Hi. Thank you for the great video. I have 2012 Tahoe with Navigation that I want to replace with a better Bluetooth stereo. Would you happen to be able to recommend a decent replacement? I do have a Jensen vx7528 that I would like to use, but I'm have trouble finding a mounting kit that will work.

[@bryanrogers851]

Hey. What are the name brands or websites I can get the tv control and steer wheel controls. This video was awesome because I'm installing a new DVD radio to my 2012 suburban pretty soon. Ohhh yea, subwoofers I could put in or have it hooked up to my existing speakers.

[@johnappleseed8888]

I installed the same harness and steering wheel controls for my 2009 Silverado with an AVH 291- BT Radio but it isn’t working.

[@distortedfocus7698]

why is my bezel so hard to get off? I've done lots of stereos and I've never had any trouble taking trim off before but I feel like I'm going to break something on this thing...

[@MrLunear]

My car is 2011 MALIBU. I bought a cheap double din stereo from Amazon and had someone installed it. But after two days leaving the car at parking, my car's battery died. The stereo sucked the battery completely. I had to ask the guy to reinstall the factory unit and returned the stereo to Amazon. Is it normal for Malibu, or did the guy install it incorrectly? What is the best solution to update the stereo without breaking bank account? Thanks.

[@jbreal06]

I purchased a pioneer double din unit. What do i need to buy to install it in my 2013 chevy impala. I already bought the video bypass and dash kit, but i noticed the black box thing you had and not sure what that is and if i need to buy it. Thanks

[@deboyskulhed187]

Thank you. This was very helpful.

[@antonsimmons4495]

Very helpful.... You did not waste viewers time. Straight and direct tutorial 👍

[@robertnelms8605]

I like you guys product how do I get in touch with you guys to get the radio and the backup camera kit

[@MrFinkFixes]

I did this install tonight with a pioneer 5800bhs everything works great except I forgot to order the AV wire for the rear screen coming in 3 days. Problem I'm having is the ASWC-1 isn't recognizing my inputs and just flashes red and green. Not sure what I should try next.

[@ProvoBeastAudio]

Double check your connections. Still if no luck, contact Metra / Axxess for support.

[@guillermobarocio]

I have a 2012 GMC Yukon I'm thinking getting the same stereo system for me where do you get the wire harness and steering wheel control to install it ? The way you do it it looks easy

[@davidleclair9706]

Approximately how long for the complete removal and install?

[@curtiswhite943]

After installing the radio did your rear tv stay on all the time or can u power it off / on with the remote for the tv I can turn my tv off now ut stays on all the time unless turn the radio off also I can't use the infra red headphones units that go with the tv

[@shawnbirch1505]

If you are still monitoring this, I did a similar install on the same truck setup. For some reason I have no rear sound and no rear video. I used the maestro idatalink, plus the appropriate adapters. Any thoughts on what my issue is? Unfortunately I did this on a used truck I just picked up and I don't know if they worked before I started.

[@acmoney715]

Hey I’ve been trying to fine this radio do you know where I can get this factory radio all the ones I’ve seen is only got the two connections?

[@mitchellsonthemove6408]

I keep looking for answers on this but haven't heard. Can you play DVD for rear tvs and then switch back to carplay on front unit and listen to music? Factory head unit allows for dvd and then switch back to radio for front seat passengers.

[@ProvoBeastAudio]

Yes, but it's radio permitting - you'll need a radio with a "dual zone" feature, and most major brands with their higher tier units will have that feature. Here is one that I'd recomend that does all of that (DVD, Wireless Carplay / Android, Dual Zone, HDMI, etc): amzn.to/3NFoiOG

[@oscarpedroza4328]

Does this install retain ALL rear functions? Infotainment system and all? Will the back seat still be able to listen to media separately from the front seat if desired etc. ?

[@andyacosta1985]

The antenna adapter you put in the link comes up as a Chrysler antenna adapter can you correct the numbers because I didn't see you use it but let me know

[@Oldhead717]

If it my radio requires me to connect the light green and purple pink wire to the harness from the car..what wires do I connect it to?

[@Chuy1996]

I got acouple questions so can you still use the rear input rcas in the center console? Also can you still shut the rear speakers by pressing the power button on the back of the center console? Can you summon a voice assistant by pressing the voice assistant on the steering wheel?

[@bobbyponce5770]

Ty for the video I bought the same connectors u have on here but still having issues with the steering wheel controls tried to program it like you did but not having any luck any help would b appreciated

[@ProvoBeastAudio]

It may be a wiring issue, or it may be a programming issue. It's tough to diagnose through KZbin comments, so i suggest taking it to a local car audio shop for assistance.

[@lyndonmarie868]

Ohhh...i figured u might have a way in....but now I have no reverse light on the side that the camera is connected to....

[@ProvoBeastAudio]

Be sure that your bulb is still connected in the wiring after you tapped into that source for power for the reverse light.

[@ralphosborne6038]

Does the chime sound almost like factory