PS 5 Controller drift Fix without soldering

[@makeandfixathome]

Subscribe to Channel: kzbin.info...

[@NMSSN]

Hey makeandfixathome, if we are going to buy a new trimmer/potentiometer, which one do u recommend? I see many of them on amazon like elecgear brand and seems a good stuff. Or do u have something better in mind?

[@PanagiotisChlapanas]

I just repaired my controller thanks to your video, and it works perfectly now! Initially, I tried cleaning the potentiometer sensor, but that didn’t solve the issue. Replacing the metallic part of the potentiometer sensor made my controller as good as new. Thank you so much for your help-your video was a lifesaver!

[@Narniak69]

Unless you know for sure the potentiometer sensor components are shot, I'd highly recommend trying to clean out the existing ones before purchasing new. Some simple cleaning of the ring track in the outer shell with some alcohol and a Q-tip instantly resolved my massive stick drift issues.

[@oogwaybetrippin8892]

Those parts are super cheap anyway

[@ricky09171015]

Yes listen to this man both my os5 controllers had drift bought a new one decided to try and clean both and they both are working it was just dirty

[@mig1017]

🎯💯 I cleaned the existing with a que top and isopropyl dissapeared. The drift dissapeared 👌

[@MonteroA]

Thank you for this comment, I cleaned them out, and it was very dirty. I had the same controller since it came out and works like new again

[@ipadmalasa9530]

@@mig1017the drifting are still gone??

[@andrewmann9419]

I’ve struggled hard with soldering in the past. I was debating buying the dual sense edge controller, and just swapping out the thumb sticks when they drift (apparently they’re built with the same materials). But it’s the price of 3 controllers (with an extra thumb stick, which you can only acquire from Sony ATM). This video has solved my problem for around $15 CDN and helped build my confidence up for future console jobs. Maybe I’ll take a stab at soldering again in the future but for now I’d just recommend this video instead. Thx!

[@makeandfixathome]

I'm happy with You. 😊👍👋

[@troyg1337]

Soldering isn't hard, if your experience is with only controllers then they're notoriously hard even for experienced professionals with top end kit the solder they use has a super high melting point...good tip is to clear away as much of the old solder as you can with solder wick and mix in some low melt solder

[@ArkStar20]

This saves me money. 2 controllers fixed with the help of this video. Thanks

[@TheRealKeetHarris]

shit like this piss me off. I want to play video games not be a scientist 😂. Sony sells us inferior products. My n64 controller still works and has been put thru a gauntlet of death defying trials

[@anahenriquez8875]

Not just Sony but also Microsoft with their Xbox controllers. I fixed two of them already for the same issue but no need to replace the parts. I just did some heavy cleaning, remove, clean, and reset the little round things. I did not use alcohol, I used BW-100 to clean it with, it's an electronic contact cleaner.

[@hasanbektas9022]

Same with my PS4 controller. I punished that thing for almost 7 years. Still works perfectly fine. I treated my Dualsense like the head of a newborn baby. It had issues after being in use for barely longer than a year.

[@johnpenrose8678]

Thanks for this stellar tutorial. Been looking for guide that didn't require me to de solder the sticks and was step by step with detail. You checked all those boxes. Cheers.

[@makeandfixathome]

@@johnpenrose8678 pleasure to hear that. Thank You 🙏😊

[@saldior]

Thanks!

[@makeandfixathome]

Thank you, hope my video helps 😊👋

[@anderxale1]

Very cool! I'll be soldering though. I can't believe they reverted back to potentiometers...

[@makeandfixathome]

@@anderxale1 Thank You 👋

[@sunnyjo1]

Worked perfectly . Saved me money.. Thankyou

[@makeandfixathome]

@@sunnyjo1 supeeeeer 😊🙏

[@ricky09171015]

You’re the best homie I bought 2 ps5 one for me and my girl. both had drift cleaned both out like you did now they both work. I bought an extra controller but ima put it away for now as both work

[@makeandfixathome]

Happy to hear that 😃😁 greetings, happy new year 🎊

[@z3mv]

No need to bend those potentiometers as much. Just bend it enough so you can get into the inside. Doing this 1 or twice more will make it break off.

[@troyg1337]

The most impressive part of this is that you picked up and screwed in every screw 1 handed and didnt drop any of them 😂 id have been on my hands and knees combing the carpet for the dropped screw by screw 3

[@oogwaybetrippin8892]

I tried repairing my stick drift with this method, i 1stly replaced potentiometer for only horizontal movement (because my stick was drifting left) but it didn't fix the problem, I've had many parts so i just replaced it again but this time for both horizontal and vertical movement but it didn't fix horizontal one or at least it didn't fix it fully. Now stick zeroes but when i move it slightly to the left i get max value on it (vertical works like a charm after i changed it but there was no problem with it since the beginning). Between every replacement I've cleaned parts with isopropyl alcohol. It still doesn't work well after 3-4 repairs. I keep getting max values when i move joystick slightly to the left.

[@oogwaybetrippin8892]

If anyone have any idea how to fix it without soldering new potentiometer please lemme know

[@makeandfixathome]

sorry to hear that, I think soldering and replacing the potentiometer is the last option :(

[@dantevon11]

I had the same issue like yours, it drift max to the left in the main screen..1st try cleaning it work,after few month same issue appeared again. Clean few times the issue remained. Suspect the green magnet part damage. Just got my spared part today,going to soldering replace it.

[@troyg1337]

What he changed in the video is the cheaper and easier fix but it is possible that the part he didn't replace is what was worn and that requires soldering

[@dmo848]

Sounds like u must adjust the stick manually. I suggest watching a few videos on the procedure

[@utilityaccount8514]

new components will come from the factory with a certain amount of dialectric lubricant applied so the end result here will be better than a simple cleaning and reassambly. Can confirm, I've done this with many pots over the years (but it won't fix worn-out springs)

[@BeansLive567]

i was kinda thinking the same thing. would it be better to clean and then re-lubricate it?

[@k-ottic7027]

Thanjs for this video. I was just about to give up. Everyone says you need to solder but this is great

[@troyg1337]

Soldering is a better fix as it could be the inner ring that wears not the part he replaced but this is a cheap and easy fix that works most of the time do it a couple times tho the inner part will wear and you will definitely need to solder

[@MetalGodOfLegend]

Soldering is still better. You upgrade your potentiometers and you will be set for a long time.

[@meadowsirl]

This only works some of the time. If the black rings are worn you gotta get soldering.

[@streetsiswatching9660]

This worked 💪🏾 🎮

[@derekf1283]

Great video, thank you. I'll definitely try this!

[@Ovj1980]

Where is the link to buy those plastic inserts?

[@Pure1989]

did this and didn't work for me. gonna probably have to solder a replacement in mine.... eventually..

[@KhemicalRPR]

You just need to clean the wipers or put new ones in , it takes longer to take it apart then replacing them and putting it back together I just did all mine and they are like new again

[@SectorRedcape]

did u buy those parts in amazon????

[@tomassoejakto]

I take it the 3 metal pegs under the plastic housing that connect to the board are just mounting and not actually electronic components? I want to try this but I'm afraid they'll break when I pry open the housing. Also I suppose I'll need to clean the housing before replacing the component? I don't have any grease though... I used to have a silicone spray but misplaced it lol

[@wayne6326]

they ARE electrical components & are the source of transfering the input signal to the board.

[@markwilson1071]

Can I use one out a ps4?

[@makeandfixathome]

@@markwilson1071 I think they the same

[@iHammouda]

Can I use this part from PS4 controller?

[@shadowmich]

Thanks for this!!

[@makeandfixathome]

Your welcome 🤗

[@dmo848]

My potentiometers were rainbow colored on the metal part. I know now that is not what they are supposed to look like. Guess I'll wait until they finally go then I'll buy all new parts from AliExpress

[@Mohammed1994G]

Hi What screw that you are using, dont want to buy a cheap one.

[@AverageGenericN.O-Resident]

Whats is soldering?

[@viljamsvtuber]

Thank🎉

[@cahamilton]

Worked a treat, thanks man!

[@M173rd]

Awesome video, get rid of the annoying music though

[@war5216]

6:24 why cant i snap mine back in? I changed the little white thing from my other ps5 controller that i dont use but it was from the right side analog to the left analog. Any solution??

[@Eliasthegoat8]

Same here

[@rendering1680]

What if u don't have Isopropyl acid? Could u use hydrogen peroxide

[@dln.sweeney]

No. Just buy some isopropyl, it’s like a couple dollars for a large container. Get the highest percentage you can find.

[@lawrenceleclerc6664]

how do i fix a controller that is charging and turning on but no lights at all?

[@Pallywacker]

If I disassembled my controller this far, I am going to remove that factory garbage joystick and solder in a proper hall effect joystick module. 🤪

[@CoryFortson-eg9jg]

Ty so much for this video man saved me anotber $75😊

[@makeandfixathome]

😃😊🖐️

[@joshl3185]

My stick end broke inside my thumb stick do I have to replace whole unit

[@stoneyhigh05]

yes

[@joshl3185]

@@stoneyhigh05 ya I figured that out now and have bought the replacements but am having trouble with the de soldering I’ve used wick but I think I need a pump or station

[@alhawi32]

عطر وعود اذان ونظفها بترجع تشتغل انا مجرب ومضبط ثلاث يدات فيها درفت😂

[@darealshmk19]

He adds a new pentinometer in this video. Doesn't really overlay state that part

[@yesmate78]

No he doesn't

[@ChasedRabbit]

I tried this and it was worse when I put it back together than it ever was before 😭

[@petrpetr9334]

Cleaning the resistance path does not always help.

[@seancasaus1036]

My personal opinion Sony loves you FPS guys 🤷🏻

[@rapidfire670]

I subscribed

[@ingenfestbrems]

Somebody find a potensiometer that matches in size and the cost of replacing would be about 5$

[@oelson]

Worked for me. Replaced both potenciometers kust in case, after that, it got a click on the horizontal movement that I fixed with some WD 😂

[@Apex-YT]

Bro, thank you i was able to fix my controller

[@makeandfixathome]

@@Apex-YT yourwelcome 👋

[@kevinescobar8102]

I swapped the little white disc in my controller and still doesn’t works sad part is I bought my ps5 5 months ago, inspected more for a $70 controller

[@Circle_of_pain_666]

All other consoles from Sony never had this issue - as I've played them ak- why now after had 2 of them going in a drift n cannot be fix or get money back v Sony v buying on amazon

[@mk41.4]

Not working 😢 The controller is broken

[@CoryFortson-eg9jg]

Just fixed mines. Both sticks with replacement pieces. 100% no drift happy af😂😂😂😂😂

[@Efrencitoable]

LO mejor es cambiarlos por análogos magnéticos o de efecto hall y se acaba por siempre lo del molesto DRYFT, esa solución es temporal casi que inútil..! es perder el tiempo...!

[@bradley7506]

I just spray WD40 Electrical Connector cleaner into the thumbstick area and rotate the sticks around a few times and wait for it to dry and about 90% of the time my stick drift is fixed. If not I do it again and everything is good… If eventually I can’t fix it this way I will buy a new controller.

[@andywithout]

Cool but i am not doing all that lmao

[@sphony]

This only works for a few minutes then it goes right back to 💩

[@jalienpaul8748]

My shii never worked you found a better way?

[@sphony]

@@jalienpaul8748 open it up again and do the same thing again on a more extreme level or order the hall effect parts and put that inside your controller.

[@iainmackenzie102]

Mine doesn't drift but if it's paused the cursor looks like it's vibrating, very weird

[@shobitchouksey3442]

I did this it still came back 3 days later

[@DavidSzalko-pu8wb]

yes, you can do it this way, but it will last for a maximum of ten days, then again drifting analog sticks, I'm crazy, I put about 30 thousand in the controllers

[@RE0XY]

Hell yeah i don't have to buy another controler due to my lack of care with the joystick

[@NathanBabb-rf5mn]

This is fucking shit. I cleaned out the sensor as shown without replacing, and all it did was kill the stickbox. This happened to two of my controllers! Thankfully one was already dead but that does not excuse the fact that the method killed two stickboxes!

[@wlkosan4063]

I use a hammer, the bigger the better...

[@OldDriver1]

Это хватит на несколько дней,либо вообще не поможет😂

[@SciStrikeling]

Idk if this works or not but honestly I'm not gonna watch past the first 30 seconds. The controller he's showing at the beginning is player 2 while off-screen someone else has player 1 controller and is pushing up in the game. Completely invalidates anything else you have to say/do in the video

[@jonathanj8613]

🤷 𝓅𝓇o𝓂o𝓈𝓂

[@waynehyde7071]

LONG

[@DarthNVious]

Will this method also work for Logitech F310?

[@michelm5834]

playstation ali express junk. Wakeup

[@AndrewRoche-j9z]

Im not buying a ps5 pro because i can see its the same money wasted bull stuff as the rest of them cheap crinky plastic

[@kequiem]

Im ab to switch over to pc im tired of PlayStation scamming us into buying new controllers not to mention they can obviously fix the stick drift problem they just want ppl to keep buying controllers

[@AndrewRoche-j9z]

​@@kequiem You couldn't have said it any more clear i as well want to buy a new PC and switch over

[@csharp57]

Exactly. This is my last run with Sony PlayStation. I honestly never had these issues with the PS4.

[@xamputated_cannibals]

Shit don't work

[@shobitchouksey3442]

I opened thos little white things on side of analog cleaned it with alochal and drift still came back 3 days later 😢