Psytrance Kick Tutorial | Punch & Depth | by E-Clip

[@EClipChannel]

Kick2 Preset Download Page: www.eclipmusic.com/post/psytrance-kick-tutorial-depth-punch

[@psychogen604]

I guess its pushed out at the same time as the video.. in 2 hours, the link is "We Couldn’t Find This Page"

[@EClipChannel]

@@psychogen604 the page will be available in the same time as video. 18:00 CET , in 3hrs

[@sha3439]

Ive been struggling either my kick for 5 years once i think i found the right one it changes in mastering stage

[@myriaddsystems]

Hurray! A Kick 2 indépendant tutorial😁

[@Plotkin_]

Man you’re a true professional

[@arthurcuevas5432]

amazing tutorial and amazing bassline Clip

[@Skanoh]

This is some great knowledge you dropped on us! Thank you so much:)

[@DigitalMatterMusic]

Big thanks x the preset, as always, big content!

[@cryptout]

The last tip is golden, don't over tweak the Kiba in the beginning of the track but at the end.

[@EClipChannel]

😉

[@theunconciousmind7314]

I've been waiting for this 😁

[@100PEACEOFLIFE]

Cool track !

[@darkÈcAyari]

Tnks so so so much! i apreciate a lot a lot!!!!!

[@EClipChannel]

You are welcome

[@pamayaatra]

this topic is so logic but i was never thinking about it so exactly like you :D great 👍👍👍

[@EClipChannel]

Yea, I also never had the same thoughts before started making videos. I’m learning so much by doing this!

[@pamayaatra]

@@EClipChannel then make more videos 😁

[@papuyonic]

What a beautiful masterclass ❤

[@truthbetold2012]

can you do one on making the high end wide and shimmery especially the hats.

[@EClipChannel]

Sure

[@ricardolimalopes2343]

Thank you so much

[@swisavi]

graet turturial!! watining for the bass line ////

[@floatinganarchychannel3204]

Thank you for this amazing tutorial!

[@ColdRane]

Hey E-Clip, I really appreciate your Videos. I learn a lot from you. Could you please remove the Lense flares flying over the video? I find them very distractive. Thank you very much! :)

[@myriaddsystems]

THANKS!

[@zenyonnocomment4399]

Iove you bro. ❤

[@Solarisbr]

keep the great work =D

[@Nenko_Music]

good stuff.thk you sir😎

[@digitalbraincreativegames]

Perfeito!!

[@deoananas4745]

14:10 how did you made the totalyzer visible on top of everything in cubase while you click on other plugins? Very nice channel and video clips btw

[@EClipChannel]

Yes, there is “always on top” option!

[@nunomaltez79]

What do you say about using a 909 kick with some tweaks? I think some early goa trance used it.

[@EClipChannel]

@@nunomaltez79 with Kick2 you can make 909 kick as well. But with 909 i’m not sure you can make punchy kick.

[@nunomaltez79]

@@EClipChannel kzbin.info/www/bejne/fIqwlKaCZ9qUiqMsi=tG5iVgLQCByfNSaU yesterday i made this kick after watching your video, in drifter, the native plugin from ableton. É muito diferente do seu, mas também acho que algo chato no trance de hoje é que todos usam exactamente o mesmo kick!

[@morsecode_GR]

Hi E -Clip! Another great video. apply in my group kick - bass a pha-979 and with -1 or +1 i see a difference in hole mix. i hear more clear the kick bass. what your opinion?

[@EClipChannel]

That’s good, but I didn’t understand -1 or +1, but anyway, if you are getting results you need, then I don’t need to understand 🙂

[@ehlerszorgman1298]

With so much Eq and processing on the kick.... doesn't it effect the shape ? I have see on a scope after applying only eq on the kick in kick2 the shape of the kick changes dramatically

[@EClipChannel]

Of course, it does! That is the purpose of EQ!

[@drdubs8934]

What kind of settings do you use on ur Digicheck? I know this is more or less taste but , are there some important ones i need to consider?

[@EClipChannel]

I think you should use what you are used to. I use other ones if I need to analyze in detail, spectrogram or waterfalls, as free response won’t show the decay of the frequencies which I believe is one of the most important things

[@Martin-vj7zx]

Kick is not tonal, but isn't it nice when the lowest frequency of the kick ends where the base starts and to make them the same frequency?

[@EClipChannel]

Defo. But not for all keys.

[@matheusmartins6125]

Eu n entendi nd , mas sei que ele e foda d mais kkkkkkkk

[@fabriceoze]

[@Kikudoxx]

At 10:26 u say the kick is ending at 50hz. But the window size of kick 2 is at 340ms. Obviously in the amp envelope the kick is stopped before reaching 340ms. So the kick is not ending at 50hz. I always asked myself how the window size and pitch envelope is corresponding to each other

[@EClipChannel]

I said “for example”, the kick ends frequency dot is at 42hz but as I said, It's only for example, to me it doesn't matter what’s the frequency as I set it by the ears. I just used it as an example. But you can rewind and see that the end dot is set at 42hz and it can be possible that the end frequency is 50hz. But again, it doesn't matter. I just spoke about the hz to make a point on which I spoke about. And if you pay attention closely, I’m sure you understand the point.

[@v_north]

Amp envelope adjusting itself to kick length? If you draw back the amp env the kicks last ozillation goes, then the next etc. It's been a while but I believe that was how it worked.

[@EClipChannel]

@@v_north not sure what you are referring to. The Kick amp in the video is around 340ms, and the envelope is ending a bit earlier. You can check the grid in Kick2, and I know that 2x1/16 on 138 bpm is around 200ms. That’s why I said it's around 200ms. About the frequencies: The endpoint is 42hz. This means that at the 340ms point, the end frequency is 42hz, so I said around 50hz as a guess that if the frequency on 340ms is 42hz was that on 200ms the frequency ending around 50hz. That was only a guess, as I am not interested in exact numbers. The kick was designed by the ears. So the first comment was that I said something which I didn’t. The end frequency point in the video is 42hz, not 50hz as you wrote in the first comment.

[@Kikudoxx]

@@EClipChannel ahhh now I get the point!

[@v_north]

@@EClipChannel I think we answered the same time, thanks for the explanation😂👍

[@theunconciousmind7314]

I make my kicks so diffrent! I have so much more mids in the click or punch. I wonder if its because of my bad speakers or if i just have a diffrent style or taste.

[@EClipChannel]

🤷🏻‍♂️

[@TheTraveller604]

why your fab eq is clipping red ? everything is red on the road

[@EClipChannel]

It’s red bacuse it’s clipping! E-Cliping!

[@TheTraveller604]

mmm what ?

[@Yobott]

@@TheTraveller604 it's a joke mate haha, as far as I see it's only the pro-q, probably boosted it a bit too much without pulling it down back in the chain, happens.. probably a mistake

[@diegopedrada7584]

Why would I waste so much time doing the kick if I can use a ready-made kick from some Pack???? Is there a logical reason for this???

[@EClipChannel]

Did anybody say that you need to do it? I don't remember saying it even once. But just because You don't want to make your kicks doesn't mean that nobody else doesn't want to do it! This video is for the ones that want to make their own kicks and that way avoid using the same kick as everyone else!

[@PhreaSpirit]

phase correction on a mono synth?

[@EClipChannel]

Of course! Why do you think that phase can be refered to a stereo only? If you have two mono signals, their phases can cancle or boose eachother. As well, the phase position of the mono signal can influence how it will sound ( not much, but it will ).

[@PhreaSpirit]

@@EClipChannel Interesting. I need to wrap my head around it. Thanks for your answers and videos - they're very helpful!

[@EClipChannel]

@@PhreaSpirit phase is just a direction of the cycle. The most important is when two oscilations of similar frequecy are meeting together. It can be one of more, stereo, mono, can be two mono…

[@Solarisbr]

how much latency does this cause? ty

[@EClipChannel]

Latency coused by what? But whatever the latency is, once the kick is designed, it will be bounced to wav, and whole channel with Kick2 and processing or saved as preset or exported. So the whole process won’t cause any latency for the track

[@Solarisbr]

@@EClipChannel Thanks master. But after you have the kick sampled... do you cut the space before the transient on the audio? Therefore, do you phase align it with the bass, also sampled? Btw, you played on my party, Deep Forest. Hugs!

[@EClipChannel]

@@Solarisbr as I said, there are so many things going on and it’s a too wide a topic to answer in one video. We could go on for a very long time with so many questions like this. There are many videos on my channel on the same topic

[@Styles2psr]

You just talking too much....bla, bla, bla, bla.........

[@EClipChannel]

Change the channel… remote is in your hands