pt 1- Husqvarna 55 build for the Horizontal Hustle!

[@dubbssawshop]

Marine Tex is good stuff. That and Belzona can achieve crazy stuff. Been holding back water from a cracked boat block for 1.5 now, cool idea and can't wait to see how she acts.

[@griffinphilemon5083]

A guy i worked with said that belzona is like steel in a tube. Just crazy expensive.

[@Doc-Cole_Trickle-of-Chainsaws]

👍🆙👽

[@cajun3197]

I’ve got no time to build saws anymore but I’m going to enjoy watching this one

[@masonmcqueen5059]

I’m excited to see the results of all these builds!

[@Doc-Cole_Trickle-of-Chainsaws]

👊MM

[@mattfleming86]

Man this is cool to follow. This may be a good way for some of the smaller guys to get a name out there into the public space. Might want to consider in the video descriptions for this shindig to link the builders if they have a channel so that viewers can more easily track down those that grab their attention. Good PR for everybody.

[@novicelumberjack]

Definitely. That's been the plan all along. Every saw will be tagged and before the run, the builder and specs will be given and their channels will all be linked.

[@mattfleming86]

@@novicelumberjack Awesome man! Looking forward to this.

[@AppalachianWrench]

That was my hopes too. I just fired the YT back up Feb 1st and started posting heavy. I want to get some more saw guys on my channel and knowledgeable subscribers in the comments lol. The past month I’ve picked up a lot of shadetree mower monkey mechanics lol

[@mattfleming86]

@@AppalachianWrench It's the "Sharts." You end up with the stanky subs. But the algorithm doesn't push long format videos like it used to so it's not like there are options.

[@AppalachianWrench]

@@mattfleming86 I’m trying to use the shorts to make partner. I accumulated 5.5 million of the 10 required during the month of feb so I have 60 days to get the other 4.5. Watch hours were 2,100 for Feb so if I can get the long videos to pick up it’ll be easier to get there in hours than short views. Once I get to the next partner starts though I have a few instructional two stroke carburetor cross section and animation videos I’m working on. I’ve been practicing with CapCut and I think I’m going to use the green screen to make kids videos as well. My son is 2 and there aren’t many mechanical videos for toddlers. I think creating something and learning tool names and car types and such would be a hit. I mean whatever pays the bills lol. Anything to keep from having to go back to working on angry people’s mowers and 4 wheelers.😂

[@Super-Dave-Outdoors]

Good luck folks! Hopefully i can get Plan A sorted out! If not Plan B!

[@Doc-Cole_Trickle-of-Chainsaws]

👍🆙SD

[@jimholz1102]

The excitement is building, good luck to everyone.

[@coreycorp7048]

Mines almost done , i thought we had to stay with the canned mufflers though so now i may need to build a pipe lol.

[@novicelumberjack]

I forgot you were building one! Yeah the rules are... I think... must not extend more that 3" past the normal dimensions of the saw in any direction. Something like that. I left room for folks to build something unique, but not a legit expansion chamber.

[@kingsaws]

Have you ever tried underwater weld. Its a 2 part putty. It starts to get real hot as you mix it together. Mold it nead it lol whatever you want to call it. , It starts to get hot. So you gotta start working pretty quick . I made a thermostat housing for a small block. Chevy out of that s***, and it worked and held up just fine.

[@ragercrepair9301]

I love this idea all the way around! I hope mine does well although I built it as a spicy work saw not as a racer. But I like how it runs so I sent it anyway. Lol. I like the idea of drilling holes for the epoxy. I hope that works out well. Time will tell how all these end up working out.

[@AppalachianWrench]

Why do I have a feeling the “helper” is going to be similar to a ring girl 😂🤣😂

[@tedneitzel]

I wish everyone the best of luck! Can't wait to see this competition it should be very interesting!

[@tatepazaski5488]

I got a couple test cuts to go and should have it sent not by Tuesday next week.

[@Doc-Cole_Trickle-of-Chainsaws]

👊TP

[@novicelumberjack]

I've been watching your progress. Looks like a solid build, buddy.

[@tatepazaski5488]

@@novicelumberjack if you have been watching my crappy little channel I would think you would hand me over the rights to the NoviceLumberjack name. Novice may be my only strong point. Looking forward to your part 2 of the HH. Thanks for the kind words.

[@eze.Morning_Wood_Farms]

@@novicelumberjack Looks like a lot of good builders and some of us no name folks throwing a saw out there. I will be sending 2 saws. Both are what I consider working saws just one a little more of a firewood cutting setup. I stated before I don't really build race saws but I do port and repair 2 strokes a lot. Just letting you know there will be 2 more coming. Hoping to have them dialed in this coming week and sent out. Also have you determined a chain you are going to use? Type of wood and size you will be cutting in? Thanks. Getting close to crunch time.

[@kowski9477]

Dubbs has got a runna

[@aaronpowell4885]

Experimentation often leads to great innovation👍🏻

[@justinweaver8107]

Very nice❤

[@coolestguyontheplanet723]

Build it like you want it to come apart 😊 Comment from me today 😊

[@MrSprintcat]

Tig welder? Maybe a buddy close by.

[@Doc-Cole_Trickle-of-Chainsaws]

👍🆙BigGuy, HOOOOO

[@Doc-Cole_Trickle-of-Chainsaws]

Good Luck everyone!!

[@crazyfeller5704]

👍👍

[@archerdanks5744]

I'd be interested in buying a ported top end for a 55 husqvarna.... is this possible?

[@chainsawcanuck]

Cool👍👍

[@dgoodman1484]

Forget the rules, and don’t even know if it is viable in a 2-stroke but hopefully someone does an e-85 build! lol 👍🏼👍🏼

[@crazyfeller5704]

👍👍

[@Doc-Cole_Trickle-of-Chainsaws]

👍🆙CF

[@shawncaudill424]

I can'twait

[@coolestguyontheplanet723]

Comment from me today 😊 Homemade pipes rule😂

[@Houseworksaws]

Mine is just about done..

[@kingsaws]

Man, I wish I knew about any of this. I don't even know what you're talking about. The event and why you have all these peoples? Lmao. I've been m I a for some time

[@kingsaws]

Never mind found the video