PT 2 Vortek PG4 install Air Arms TX 200 MKIII 22 caliber

[@whiskeykilmer1866]

Great camera work!

[@airgunspestingch.8426]

👋🏾sup brah! Thank you braddah👊🏾😎

[@AIRSTREAMRIFLES]

Oh Yeah new spring install 👊🏼💯

[@airgunspestingch.8426]

👋🏾sup brAh! Good project bradda👊🏾😎

[@AIRSTREAMRIFLES]

@@airgunspestingch.8426 I see you bro keep it safe out there 👊🏼

[@fjqtaxch9]

Ken knows how to improve perfection

[@airgunspestingch.8426]

👋🏾sup brAh! Appreciate your compliment! Thank you! Means a lot bradda 👊🏾😎

[@gmanneod8085]

Pretty underlever rifle, Ken

[@airgunspestingch.8426]

👋🏾sup brAh! Not as pretty as the Weihrauch but it will do bradda👊🏾😎

[@harryhunter2055]

Nice video, That’s actually a late MK2 I think. Mk1 has no notches, Mk 2 has 3 notches not evenly spaced like yours and the MK3 has evenly spaced notches. It should be sweet as to shoot 👍

[@airgunspestingch.8426]

@@harryhunter2055 👋🏾sup brah! I contacted air arms with the serial # and it is a mkIII.Thanks for the shout out! Fun to shoot and deadly on the pest birds 😉braddah👊🏾😎

[@harryhunter2055]

Hey man. Ahhh that must be a pre 2006 MK3, nice rifle mate.

[@airgunspestingch.8426]

@@harryhunter2055 👋🏾sup brah! 2002 braddah👊🏾😎

[@chuckhunter1410]

You actually can do a TX without a spring compressor!!! Your right they are the easiest Springer to work on for sure! Did you use Tom's piston seal too?

[@airgunspestingch.8426]

👋🏾sup brah! Yes I used Tom’s piston seal bradda👊🏾😎

[@springpistonriflefeverlone9611]

Nice 😉👍. What pellet were you shooting?

[@airgunspestingch.8426]

👋🏾sup brah! H&n ftt 14.66 5.53 head size bradda 👊🏾😎

[@springpistonriflefeverlone9611]

@@airgunspestingch.8426 I really like the FTT. They remind me of what a high quality CPUM 14.3 should be.

[@FirstStateAirgun]

Don’t see to many of underlevers✊

[@airgunspestingch.8426]

👋🏾sup brAh! Sure you’re right! Not many out there bradda👊🏾😎

[@bhmsupra]

Ok - the first 4 minutes of the video were possibly the dumbest thing I’ve done in years.

[@phillipward4862]

The mk2 has 10 notches not 2 my friend and a shorter stroke piston

[@airgunspestingch.8426]

👋🏾sup brAh! Was told it was two🤷🏽! Good to know braddah👊🏾😎

[@phillipsharpe6459]

Camera to close carnt see what you are doing half the time, 👍

[@airgunspestingch.8426]

👋🏾sup brah! Apologies braddah👊🏾😎

[@BruceMurdock]

Move your camera back & scan much slower,

[@Andrew-BeeWise]

Does not show how to strip the rifle to install the Vortex unit, nor how to lubricants it and with which greases and what not to lubricants ti avoid diselling. He’s even stated incorrectly how to recognise a Mk2. Waste of my time and that of others if you need a step by step instruction for the disassembly and reassembly with the new unit.👎

[@cesare307]

16 joule I want to selling my Werauch hw77 full bacause her is too much rumor, and I will buy air arms tx 200 bacause her gunmetal is silencer

[@paulwatson9217]

You are wrong! Mk1 no notches Mk2 three notches evenly spaced M3 three notches two together one spaced slightly away from the other two like yours is Mk3 Hope this helps you understand As for your camera work you are beyond help with that lol

[@airgunspestingch.8426]

👋🏾sup brah! Thank you for the explanation! Yeah my camera work not the best! Agreed braddah👊🏾😎

[@paulwatson9217]

@@airgunspestingch.8426 Don’t take it to heart I was just teasing you mate