Pushing our STOCK N/A Barra with MORE BOOST!!

[@PFIBrent]

She Rips!!! Thanks for the shoutout! This was awesome!!

[@joelucas6601]

Made me smile, boosted boi/pfi fan for 3 years now, crazy to see you acknowledged and respected by other channels I follow, literally had me laughing at the Bad Obsession Motorsport reference in their 'escargot' engine selection video, been following them for 6 years/episode 3 of binky, was surreal to see. Keep up the great work, you're all growing and developing exponentially at the moment

[@haydensmith9064]

"just one more pull" what every teenage boy says before bed 😂

[@tristanstephens9076]

Teenagers... you need to change that to males hahahaha

[@mynamea.n.s.s5472]

Hahaahhahahaha

[@brianhoffman4861]

Nice.... my granny had one.... lucky she only took out half the neighborhood and never stuck it in D.... for more destruction.... naughty grandma

[@boganatorhawyis7974]

When you need a full send coz some chow burner in his paddy whacker tried to take you to the rice fields, so you punch the berries down the old Wu-Tang war whistle to find out the eBay wastegates called in sick and sends a full load of Nagasaki into cylinder#1 and puts Rodney on a one way holiday to Mars after knocking like a jehoveh witness. Love the work fellas! 👌👌🚀🤙 SEND IT!

[@oliveoyl388]

🤣

[@sugarbombs6884]

This comments confuses me.... I love it!

[@raphaelsolopitias6303]

Can i.....can i steal this?

[@trevorsmith9251]

Next episode Kevin and Barry hit the streets of Mexico 🔥💪

[@10GTE]

@mad ass when someone says Mexico, they're not talking about actually being in Mexico 🤦🏼‍♂️

[@sugarbombs6884]

@@10GTE nah we ship our cars to Mexico just to do skids 🤣 and then we ship them back..

[@Gidanski]

Its falling off up top as the BBM is flicking back to shut at higher RPM's. Unplug the solenoid to have them open at all times.

[@idoskidsattheawesomeauzzie9255]

Barry the Barra is an ABSOLUTE AWESOME ANIMAL 🦔

[@robcanning8534]

Phrases you want to hear from a dyno booth: "Bloody hell..." and "Ooops..."

[@isaacmorgan9309]

Fuckin love the skid factory burn. Class act.

[@chiplinning3010]

Bloody awesome content guys. Love your work.

[@justin3131ify]

Couple more degrees "just to give him a taste, see if he like it" 😂😂😂 on a serious note sell me Barry when you are done?

[@lukeanderson5781]

Best KZbin channel ever

[@andrewmurray6772]

" Any more boost, and Uncle Rodney is coming to visit....." haha :) What could possibly go wrong ? :)

[@mg74xbgt]

When you weld the diff chuck some gears in there !! You must have mates with old Nissan diff gears , either 3.9 or 4.11's . Btr has horrible first gear and Falcon is soooo heavy . Give Barry a chance !!! With willowbank closed you have the time !!!

[@10GTE]

Skyline/pintara 3.9/4.11 gears are good if you're N/A. But they don't cope in a falcon with 400hp. I know from experience. I've gone back to 3.45's and they're perfect!!

[@nathans1829]

10GTE in a ba/bf?

[@10GTE]

@@nathans1829 Yeah, I had 4.1 mini spool in a BA. Didn't last too long once it was turbo and shattered the pinion gear. Problem with 4.1s in a 7.8" diff is the pinion gear is too small.

[@nathans1829]

10GTE I put 4.11 in my r31 and it’s awesome would love to up the gearing on my bf daily for some fun

[@mg74xbgt]

@@10GTE Never had a problem with them in my Nitrous applications , but they are only 7.5" gears. Am currently setting up a Ba with M80 4.11s so should be strong enough. These boys should have no problems sourcing a turbo M86 cradle and then using Territory 4.11s.

[@XR1967]

You guys need to do a shirt with.. Just one more pull.. on it.. Thanks for the vids..

[@boyb3000]

446HP No intercooler insane

[@mrsomething0075]

I know im late to these videos. Im watching this because i bought a mint Ford territory Ghia in South Africa about 2 months ago. Just want to see what the motor is capable of. Great video to watch. Thanks

[@MrNosajwhitey]

Awesome match up

[@bobbyoz8251]

Thanks Guys for giving me a good laugh for the day ,love your videos!

[@chiller5438]

I said to the skid factory boys to make that dump the same on the passenger side....I like the way it bends over the brake booster looks mean!!

[@Tony-112]

Imagine this beast overtakes you on the freeway 😂😂

[@ashcosmo3854]

Holden drivers don't need to imagine

[@99unclebob]

you 2 are killing it or trying to, and it is amazing cousin Rodney never showed up, looking forward to the next video between these 2 Barras

[@GoodnightWalter]

Bazza got some new dentures.

[@wooden2187]

Can you chaps do some turbo Honda stuff as well? See how far you could push a J35?

[@ScottSherrington]

Didn't even watch the video,before I had to comment, 'I see no reason why not!'👍😎🤣

[@marce4458]

Haha. Love Barra goodness. More resilient than we think. XR6T Barra owner. You punish the shit out of them! God love you lol! 😊

[@jmyd83]

🙏🏻 for uncle Rodney

[@ashcosmo3854]

This car makes more power than my BA XR6T with fuel pump, injectors, tune and an intake ! Although I think I have my money on which one lasting longer haha

[@carbonisotope6444]

Ofc your one is more reliable but non the bext all that horsepower for 1300

[@tangles01]

Is that the BTR auto in that thing?

[@gavindennis6454]

Great work Nugget boys, I'm a diesel technician, as you know at retail level we can't do anything but the best, blah blah. I do appreciate what you guys are doing. Wish I had a hoist a nd dyno. Keep it up Much respect 👍

[@Jazsft]

👌barryvid-19 has no chance against Kevin lol Looks like a face under the bonnet 👀

[@reaperlux922]

Boys do something with that front bar. My OCD is off the chart :)>>>>

[@MrCliffep]

can you do a blog about the difference tuning a petrol to a diesel

[@dirkdiggler9082]

Im new to the Barra world.What ecu are you guys using and can you tune a stock ford ecu??

[@tiporari]

Stout motor. He likes it! Lol.

[@ihakarz4484]

How much would it be to pay for a tune if i did it to my falcon and wanted you to tune it....i live in Nz haha but if i lived in Aussie?

[@izacr106]

Dope to see the BARRA,450 churr on a factory block besides the ARP headbolt n studs was it? Keep me motivated for my Barra turbz coming soon👍🤙

[@NuggetGarage]

100% unopened stock N/A BA falcon motor, no head studs etc, just china turbo, e85 and send

[@izacr106]

Oosshh churr,i like the bumper repair too makes it look better than the rugged,...hows the Torque converter doing

[@Aidan.17]

Bazza is gonna smoke that Crummydore!

[@Rotaron]

put it on the giggle gas !!!!

[@Mrxguy]

"Shame" lol

[@hudsonsled454]

Bazza luvs it 💪

[@keeganholland8372]

I’d be really interested in you explaining more about what you do especially with timing, for those of us who don’t completely understand cheers fellas love your work

[@ShainAndrews]

Too much timing down low increases combustion pressure for longer durations of time. Rod's don't like that. Lean AF ratio makes things melty. So he dialed things back to improve the safety margins...

[@muntz0r]

Getting some tips from the russel coight of youtube (scotty from carnage)

[@beerturbogarage]

Its time to smash the rods.

[@StopDropandLOL]

You guys are hilarious

[@mynamea.n.s.s5472]

I hope tune house in Sydney are as good as you tuning wish you could do my car

[@beerturbogarage]

Whats the rear housing on the turbo? im my experience the china housings are not as big as they advertise and the ford really does need the 1.06. My china 1.04 housing had 12 psi peak and 8 psi toward the top end, put a genuine garret on there and it would do a solid 12 or whatever line you wanted. You might be better of fitting a standard ford rear housing to keep the boost solid int he top end and not so fast spooling?

[@mranderson911]

what a diamond in the rough

[@davidfraser6346]

So symmetry, all for the driver, Subaru style

[@westie4ageturbo.749]

Good ol barry and kev. Cant wait to see what Barry can do after kevvy suprised us all last time, ( im still at the start so dont spoil it for me!)

[@enduroboi6780]

Not sure if Kevin or Barry farts worse.. Tip top fellas, love ya work 👌👌👌

[@MrThebrownie72]

Love it go Bazza

[@patrickkrenz515]

What's that inside the exhaust at 2:36?

[@ShainAndrews]

Stop idiots dropping large items in. Hopefully to keep idiots from getting hit with large turbo kibble when it lets go.

[@blainoinsano7955]

When’s the mercy coming boys? Would love some shirts or even just some mad logo stickers! Keep up the good work loving the content🤙

[@demonic477]

the old Barra may stand a chance if you put a good set of connecting rods in it .but you guys know that as it sets now Rodney is coming to visit soon it's going to be a shame to see him go but hopefully the Barra wins and makes you want to build it up for an install in Kevin .

[@sugarbombs6884]

@@alexandersupertramp1293 BF LPG motor, connecting rods are similar to XR6 turbo rods

[@squrkols972]

12:36 just don't put 18psi in and try to make 400kw

[@davidfraser6346]

Send it to hell, get some taxi rods and some ring gap

[@waterskierjohn]

One more Barry come on.. Come on.. One more Barry on song... Come on.. Now let's gap Kevin!!

[@NaN.404]

DIY Australian 2jz... Man does whatever it can when imports are closed... We need to see this at the track now!

[@johnl3567]

Barra nearly making more than grandpa with 12 cylinder and a sooty boi

[@dinosshed]

How about some water injection into that non intercooled intake, it'll last longer

[@raddeal1]

That what she said

[@shaneanning180sx]

What u painting it thats too much looks to flash

[@Josh-e2l]

Where can I get nugget garage stickers?

[@HUNTER01101991]

That slap 👌

[@lucastopham4234]

making more then @zacbaldy xr6 turbo lol

[@anthonypaterson8359]

He's too much of a pussy to turn it up or even put his foot down.

[@cornfedboost]

Barry need to calm down a bit his thyroid might play up 😊😂🤣😅

[@Harley032]

I’ve got an n/a+t bf and it’s running 12 pound just fine. Apparently 15 is the limit

[@10GTE]

Its the power more than the boost thats the limit. 450hp is definitely getting close to limit for the rods.

[@gavindennis6454]

Can you guys please get a barra, run it on normal gas, boost it and see what it takes? Everyone juices them on E85 I want to see what you can get on average shite gas with a standard xr6 turbo. Early or new, which ever you boys can get your hands on.

[@sugarbombs6884]

10s for 2k?

[@sugarbombs6884]

Thanks your the heart boys! Barry for the win!

[@MrLinnyb007]

You guys are so lucky these days with connected laptops and youtube content to keep you occupied. All I had was solitare and space pinball.

[@1993kawasaki]

i think 1 click is 1psi on the boost T

[@blakevoege2857]

you guys wanna tune my na+t fg falcon lmao

[@ShainAndrews]

Rodney is in self quarantine. Better make use of the time while you can.

[@deanharris9375]

Wish you two guys could do my car for me Iv got a beast of a corolla Iv been building boys only needs painting and it's finished but Iv got a cut and shut ke 55 with skyline running gear and a vl rb 30 engine a real beast how can I show you boys love you guys put turbo on .I e for me lol use my car for a show lol set up not bad Power to wait ratio is insane lol with the wheel size and gearing I call him Frankenstein lol

[@chrissmith9854]

The Kevin eater

[@michaelmcclown5593]

Coool.

[@garethmcgregor1621]

👍👍👍

[@adelaidesky5039]

Barry will kick the shit outta Kevin all day every day, get a barra up ya!

[@titahibayflier3160]

What ya doin? Oh watchn PFI speed... What they doing? Turning up the boost and making power... What we doin? Making excuses and whimping out.... TURN THE DAMN THING UP BOYS!!!

[@hopndrop2000]

all the conrod jokes made it

[@nismofreak33]

no fucking way hahahaha

[@GarageSupra]

This will 100% do 13's !

[@sugarbombs6884]

It already did 12s 🤣

[@GarageSupra]

@@sugarbombs6884 oh damm haha i am late to the party this is the first video i have seen from this channel!! sorry guys

[@Ginga7r]

I'll be saying that till I'm 90

[@tomd5953]

Sneaky eBay water to air intercooler come onnnn

[@DropkickNo1]

Intercooler........

[@anthonywhelan8373]

17psi blow up

[@bencrisp9776]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@markfinnigan4994]

Think uncle Rod has your address

[@wesgates5632]

Only inline 6's worth messing with are painted red.

[@nordic5490]

Green tops have better compression

[@chargerwoh]

Definitely not the best of the old Aussie six,s but they were ok in there day

[@dukeperformance9978]

Saying of the week....Can't fix ugly....

[@Zukini28]

Good on ya Baz. Better than Kevin the wanker