Pushrod VS Direct Drive

  Рет қаралды 404

Better Tattooing

Better Tattooing

Күн бұрын

Пікірлер: 15
@brian1291
@brian1291 9 ай бұрын
Keep the content coming!!
@sornsuwannamkaew5
@sornsuwannamkaew5 9 ай бұрын
It was me who asked you to make a video. I thank you very much for the content you gave me.
@olegbarth928
@olegbarth928 9 ай бұрын
Thank you for your words at 7:10❤ I've been listening to them several Times and it was a Joy to hear These words about fk.😅
@joshuahall433
@joshuahall433 9 ай бұрын
Fantastic work man....do you have any ideas on how you would improve the pushrod system to make them more efficient.... Would love to hear your thoughts 💪
@BetterTattooing
@BetterTattooing 9 ай бұрын
Changing the pushrod directly to make it more flexible or stiff, changing the size and shape of the ball end, or changing the cams are about the only ways to modify its use without swapping a motor.🤘
@olegbarth928
@olegbarth928 9 ай бұрын
Theres No way to Change that system, without calling it different. Even the swash Plate Machines operate with Push Bars, that get pushed Back by membrane or a spring. The only way to improve them is getting cartridges, that have an extreme strong membrane, to get the rod fast enough Back in Position. But that would require a much stronger and heavier Motor too.
@BetterTattooing
@BetterTattooing 9 ай бұрын
@@olegbarth928 I don’t understand what you mean. You can change parts of like types to change performance. It doesn’t change the machine to swap a cam, it changes its operation. I’d compare it to swapping laces on a shoe. The shoe stays the same while you get more flair from new ties. Does this change influence operation - of course. Does it change the machine. No
@olegbarth928
@olegbarth928 9 ай бұрын
@@BetterTattooing i also allready changed Motors and cams in Budget Machines, to achieve better Performance. But it didnt improve the system. It just improved the Performance of a system, wich have a limited potencial. I thought, the question was, how to improve the whole system, Like how to improve a car wheel. You could use better tires or better rims. But the system would stay the Same.
@BetterTattooing
@BetterTattooing 9 ай бұрын
@@olegbarth928 I got you. If taken that way then yeah. A total change in a system would be needed. The whole pushrod set up is woefully inefficient. You were totally right, the only major change is bladder strength which totally modifies the efficiency. Having only a few fixed parts makes little room for improvement. Good catch. I’m on my first cup of tea today and misspoke as I sped read through comments today :D next time I’ll take more time to write a more thorough reply🤘
@hacedms
@hacedms 9 ай бұрын
How about inkjecta? Thanks for the video
@BetterTattooing
@BetterTattooing 9 ай бұрын
Meh. Better prices but still too expensive in my opinion. I’d use them over the most expensive machines nowadays. Here’s my list - 1. Any coil (if you can handle the weight they are the least money-pit type of machine you can purchase. 90% of the cost is an upfront while maintenance over its lifetime is negligible) 2. Cheap pushrod 3. Expensive direct drive. 4. Axys machines (still a bit expensive but they are well manufactured. 5. Anything that costs under $400 Dead last - everything over $400 You can invest money into a build to improve it. This includes a $70 knock off machine where you can buy a comparable motor and swap it in to achieve the same performance as a machine that cost sometimes exceed $1200 I’ve been testing this approach with people using rebranded machines for around 6 months. It’s like the Pepsi challenge. We hook up 3 machines and let people test them out then give us feedback about which machine “feels” the best. 90% of those tested have no opinion (accompanied with slight panic that they may be wrong about something). The rest usually choose whatever feels best in their hands and note nothing of performance. After seeing this I changed my mind about what “value” meant and now focus on long term investment over marketing gimmicks. I will say injects does have a better open source product than most and makes it easy to get replacement parts for self-service. Totally a bonus in my books. They are miles ahead of… some sellers…
@dwaynewayne7176
@dwaynewayne7176 9 ай бұрын
“Smashing your magnum needles” What are Pros and Cons of doing this.
@BetterTattooing
@BetterTattooing 9 ай бұрын
😂against the bottom of an ink cap or flattening them out?
@dwaynewayne7176
@dwaynewayne7176 9 ай бұрын
@@BetterTattooing both lol
@BetterTattooing
@BetterTattooing 9 ай бұрын
@dwaynewayne7176 I’ve done one about pinching the tips a while back. I don’t know if it’s till up but I’ll add that to the list
Kubernetes 101 workshop - complete hands-on
3:56:03
Kubesimplify
Рет қаралды 1,6 МЛН
Elza love to eat chiken🍗⚡ #dog #pets
00:17
ElzaDog
Рет қаралды 13 МЛН
Я сделала самое маленькое в мире мороженое!
00:43
Fake watermelon by Secret Vlog
00:16
Secret Vlog
Рет қаралды 33 МЛН
Why you CAN'T shoot a full movie on your Sony FX3 or FX30.
2:38
lunchtimecowboys
Рет қаралды 792
All About Opaque Gray Tattoo Pigment
11:12
Better Tattooing
Рет қаралды 1,1 М.
Capillary Cartridges - What Are They And Are They Good For Tattoos?
21:36
Are You Doing That Right - Packing Color
17:11
Better Tattooing
Рет қаралды 788
Traditional Tattoo Aftercare Explained - Yes, It Actually Works!
28:41
Change Cam Wheel | Inkclaw Neon Blade Tattoo Machine
1:24
Inkclaw Tattoo
Рет қаралды 13 М.
LET'S TALK TECH-WHEN DO I NEED TO CHANGE PUSHROD LENGTH?
1:17:47
Richard Holdener
Рет қаралды 9 М.
Tattoo Wound Healing - Inflammation
23:36
Better Tattooing
Рет қаралды 421
Are You Doing That Right?  Squirt and Spray Bottles
9:55
Better Tattooing
Рет қаралды 477
Stretching Skin - Are You Doing That Right?
11:52
Better Tattooing
Рет қаралды 920