putting tires on the Yamaha yfm200 moto4 so it can be pulled

[@72mmALKYDRAGGIN]

It IS COLD 🥶 OUTSIDE HERE in ILLINOIS TOO 10f.

[@HustlehousePA1978]

Good video Buddy! God Bless ya too and Merry Christmas. Hope that new carb gets her barkin off! Hey if ya ever get those peacocks to say subscribe, I wanna buy one of them! lol.

[@smockassingaround]

You got it buddy, Merry Christmas to yuns too, thanks alot! Lol

[@72mmALKYDRAGGIN]

Put the piston to the top, apply air to spark plug hole and see where the air is coming out. I bet it comes out the intake or carb side. Remember when the piston is at the top BOTH VALVES SHOULD BE CLOSED. 😉

[@smockassingaround]

So you still think its a valve?

[@72mmALKYDRAGGIN]

@ yes I saw it puff every time u were turning it over. Try the compressed air and see if it comes out the EXHAUST or INTAKE or OIL DIP STICK HOLE. It will keep pressure or blow it out where the weak spot is…. Next video MAYBE TRY IT…

[@smockassingaround]

@72mmALKYDRAGGIN okay 👌 bud you talk me into it. So take the piston to the top and put the air to it, so you think the valves are dirty or burnt?

[@72mmALKYDRAGGIN]

@ yes! When the piston is at the VERY TOP (use a straw) that will insure BOTH VALVES ARE CLOSED. Then apply air pressure to the spark plug hole so it won’t leak. The air will STAY in THE CYLINDER OR ESCAPE through the OIL FILL(dip stick hole) that would be rings,2nd air will ESCAPE out the INTAKE VALVE(carb) 3rd air will come out THE EXHAUST (exhaust valve). Usually the exhaust valves don’t have the issue but if it does come out the carb check the clearance between rocker arm and valve because I bet it’s either TIGHT or the seat has RUST BUILD-UP from sitting. It will start once u figure it out. A little air coming out OIL FILL hole is fine that is just worn RINGS. Merry Christmas bub and I CANT WAIT TO GET IT GOING WITH YA😉. I had some engine issues over here too! I posted some KZbin shorts😂😂👍

[@72mmALKYDRAGGIN]

Hell yea brother LETS GO🏁