Fixing a broken irrigation pipe with a slide repair coupler. Repair coupling: www.homedepot.com/p/Apollo-3-... PVC primer & cement: www.homedepot.com/p/OATEY-8-o...
Пікірлер: 30
@jbraMoVal3 ай бұрын
big stores should sponser your video. For someone that doesn't know how to use every single connection out there, this video was extremely helpful.
@jbraMoVal2 ай бұрын
Although it was a great idea at first, sadly it did not work out for me. Perhaps I grind a little too much but I did add plenty of PVC glue and let it dry for 24 hrs as indicated. Luckily for me, I had no obstruction on either side of the repair - I just had to do it the old way. Thanks for sharing anyways!
@blackhorse29474 ай бұрын
This is absolutely the best video and information when you have a very small work place to make this type of repair………..👏
@danrescinitiАй бұрын
My exact situation! Good idea to pre-mark full extension and bend the applicator! Thanks for the video!
@simojanahi7959 Жыл бұрын
Thanks for the tips. I am installing mine today.
@GardenGlimpses-NorCal3 ай бұрын
Perfect video and explanation, thanks so much!
@tbarclay81762 ай бұрын
Great video- very clearly explained.
@jjjjjj43619 ай бұрын
Thanks for posting!
@gerrygoodlow3322 Жыл бұрын
Thank you!
@Blockdagdaddy5 ай бұрын
Dope TY
@stickboy677210 ай бұрын
helpful, thank you. how long before safe for water pressure?
@christophergreen5159 ай бұрын
If it’s connected to straight pipe you can turn water on immediately. If you ran it into a 45* or 90* give it 30 mins to an hour for 1” or smaller. The pressure pushes outward so the straight pipe doesnt want to separate whereas a corner get pressed as the outward pressure applies here(hope this makes sense) Bigger stuff, 2” plus, try to let set over night.
@waltercastro20155 ай бұрын
I always recommend 1-1/2 or 2. Don't cover your work yet. Test your work, no leaks, success. Sometimes depending on the product, instructions gives you specific times and when are considered cured safely to use. Depending on the diameter and pressure pvc. I remember the last freeze we had around 2021, the product label was set at 4 hours which was weird. Due to the cold freeze I took the advantage of turning on the next day. No leaks.
@warrenmayfield48762 күн бұрын
I tried this and of your pipe isn’t really straight it will still leak.
@kveldgorkon46115 ай бұрын
E Z P Z .. Thank you
@tripjet99910 күн бұрын
One suggestion: Wear disposable gloves.
@kule5106 күн бұрын
Why?
@RyanNelly Жыл бұрын
Must these be fully extended or will likely leak??
@christophergreen5159 ай бұрын
Theres a gasket inside. You should extend all the way if possible but Ive had some fall a little short and had no issue. Just extend as much as possible.
@themattsweeney3 ай бұрын
There are 2 rubber o rings in them ! My first time to try!
@phantom9169 ай бұрын
How does that not leak?
@thomasdaum19274 ай бұрын
There is an o ring seal inside the slide part . They don’t leak .
@humblerawat9 ай бұрын
What was the size of your irrigation pipe ?
@AmericanDrinkerАй бұрын
Wouldn't you like to know
@publicEnima22 күн бұрын
this will eventually fail due to the rubber gasket inside the coupler. I don't recommend using it. depend on your location. a plumber used it to repair a waterline and it failed within a year. Had to dig up the whole thing and do it properly. So far it held up 6 years and counting...
@jrm16327 күн бұрын
Two no-stop slip couplings will be cheaper and more durable!
@projectreaDIY8 күн бұрын
Thanks - helpful
@MrDaiseymay7 ай бұрын
You would never see PLASTIC water supply pipes, that near to the soft soil surface in Britain.