FSLTL | Free AI Traffic Addon for MSFS | Full Setup Tutorial

[@BobbyFuzzy]

Thank you for the shoutout Q8Pilot! Nice video 🙂

[@Q8Pilot]

Thank you for the great introductory video. I would not have known about it without your video.

[@BobbyFuzzy]

@@Q8Pilot Then I guess we're even as I could say the same about many of your videos 😁 Thank you!

[@jesphillips2193]

@BobbyFuzzy Love your channel!

[@Paradyski]

I've been using this for 2 days and its amazing. Watching planes coming and going at EIDW at dusk was amazing. I turned into a Plane Spotter :)

[@RayKit]

lmao!!! me too at london stansted! watching in vr

[@MR.B1819L]

I was a tester for this amazing product since January and I couldn't wait till the public got a hold of this!

[@fiftyphonkartist]

its great, the only thing that needs to be improved is the fps

[@Q8Pilot]

Hats off to the developers, and to you for helping them out. Great product.

[@pingu5543]

Subtle flex

[@christhenademan13]

Finally a good and easy AI Traffic Addon. AIG was a pain to use!

[@Q8Pilot]

Absolutely! I love this addon.

[@wings4passion]

Thanks for bringing my attention to this brilliant add-on! I was considering buying FS Traffic but saw how it had some issues so I held off on it, but then I saw your latest top ten freeware add-ons video where you mentioned this. I installed it and had a blast, the immersion is amazing!!

[@Q8Pilot]

Happy flying my friend!

[@tipp55]

A very clear and concise tutorial. Thank you Q8Pilot! FSLTL is a marvellous creation for MSFS.

[@Q8Pilot]

Glad you found it useful.

[@pminhas]

Q8 this was an awesome tutorial. I followed along with your clear steps and it looks awesome. Great Job! I love your tutorials and appreciate the hard work you put into it. Thanks!

[@Q8Pilot]

Thank you for your kind words. Appreciate it. Glad this was helpful. Happy flying !

[@EJ109]

Wow, this is awesome. Thanks for the heads up on this one, and as usual great video. This may be replacing AIG as my AI traffic generator.

[@Q8Pilot]

Thanks for watching!

[@MurottalQuran078]

Where are the files resulting from installing FSLTL traffic base models and FSLTL traffic injector?

[@777FreakyD]

Nobody has talked about or shown the VFR airplanes. Are these GA puddle jumpers (cessnas and the like)? Website says nothing about it. I think that is what's missing in all the AI traffic systems.

[@bstikkel]

I agree. The smaller aircraft is often forgotten in ai software...

[@iJMultiplication]

Thanks Q8Pilot!!! Your setup videos are the best!

[@nael678]

nice video thank you, but i still don't see movements of aircrafts on the ground of the airports. no take offs no landings, no taxi, or its very rare.

[@SurvivingRetirement]

fsltl plus theninjection is in my community folder and msfs on and fsltl is running but I hear other traffic but I don`t see them and there are AC that I can see going in the wrong direction. I am sure that this will be something simple . I will watch the video again.

[@themtoniraniremaxbroker2447]

Many Many Thanks for doing this Sir!! Much Appreciated!! Be Well.

[@FerGrutta]

Although it is not very consistent with what flightradar shows, it works quite well. I see some white liveries still but I guess it will be until the developers install more liveries

[@Q8Pilot]

Yes it will not match Flight Radar exactly, I guess there is a bit of a delay. The models will be improved with time.

[@JohnZsAviation]

So is vatsim model matching automaticly included with the AI traffic?

[@Q8Pilot]

Yes

[@JohnZsAviation]

Thanks

[@jermainegriffin5299]

Hello Q8Pilot I have done some plane spotting at my home airport Hartsfield Jackson for hours. I have yet to see an aircraft takeoff? They do everything else but takeoff , why?

[@Damlistky9-9]

This, this os how tutorial should look like👏👏👏🔝🔝🔝, thanks so much🙏

[@Q8Pilot]

Thanks for watching, glad it helped!

[@CactusBravo42]

I personally don’t care for IFR or VFR traffic so I can just set those to “0” if I only want static ground traffic, correct?

[@mali6491]

This is an amazing product, however I believe I have discovered a shortcoming. So when I started using FSLTL I noticed that ND TCAS would not display any aircraft in vicinity. So I turned the REAL AIR TRAFFIC back on in TRAFFIC Options, without removing FSLTL folders from the Community folder and did some flights in the FLYBYWIRE A320, but without starting FSLTL. As I expected the TCAS radar was working again along with the FSLTL liveries minus the FSLTL sounds. It seems MSFS TCAS will detect only native traffic. Would love to hear about other users experience in this regard.

[@Q8Pilot]

I have no issues with TCAS with FSLTL whatsoever. Works as it should.

[@rroversport]

Very concise and appreciate the step through to setup. Thumbs Up (LIKE) from me

[@Q8Pilot]

Thank you for your words, support, and for watching the video!

[@vasiliosgrekousis8192]

Thank you! However, I see few white liveries, is there any way to get rid of those, or, simply find the equivalent missing livery? Thanks in advance!

[@anbrod1]

Seems to me that all planes are static and no movement, what is i am missing here? Cheers!

[@Q8Pilot]

May be your IFR flight count is too low. Try changing that. Go to LAX. Wait a little while and you should see movement.

[@Kapanga2009]

Thank you!! It was very useful for me! 👌👌👌

[@Q8Pilot]

Glad it helped. Thanks for watching!

[@Designerbabybag]

Will this ever come to Xbox with WASM?

[@vasily2022]

Thanks. Can't wait to install this. I really hope though that it works with proATC SR.

[@Q8Pilot]

it should work with ProATC.

[@gfar4964]

Another great video, Thanks!

[@Q8Pilot]

Thanks for watching!

[@YOXEL06]

Is it work for cracked version?

[@57Jimmy]

I am upgrading from fsx on old system to msfs on new gaming pc. I fly mainly CYVR-CYYJ and all around southern Canada. Does this program have the smaller regional turboprop airlines like Pacific Coastal Airlines Central Mountain Air etc? I dont think the payware version handles them anymore…well at least they dont list them on their aircraft list. I really enjoy flying the small and shorter routes with flight times around 1-2hrs.

[@Q8Pilot]

I have seen very little of those models in the program. GA at this point is highly experimental.

[@dangerbeatz6342]

it doesnt work for me.. do i have to delete aig for it to work or what could cause the problem??

[@Q8Pilot]

Move AIG out of the community folder yes. Try this out. If you don't like it, you can always bring AIG back.

[@dangerbeatz6342]

@@Q8Pilot thanks bro. I was going mad so I deleted it, didnt think of just moving it out... but it works now. thank you

[@miguelk.8351]

Nice Vid, thank you. Do you see any incoming and landing Aircrafts? I just see Aircrafts taking off

[@Q8Pilot]

There might be an issue with landing aircraft as I am not getting them as of today as well.

[@chillipeppers7285]

the flightplandatabase website has been shut down. how do i optain an API key now?

[@Q8Pilot]

I just checked, the website is operational.

[@aviationibafb]

I only have 50gb left on my C drive☹️☹️.

[@SimPilotMika]

Thanks Q8! Also I need your help with knowing which addon to use here. I tested to see if people would get sick using a Timelapsed VR recording using someone else’s video and speed it up to 6x, 8x or 10x, which are the only ones that world work, and unfortunately even at 6x it didn’t look nice to look at The only way I can bring back the Timelapse idea is if I have a sort of “GoPro” style camera at the window for the entire cruise. Is there a replay addon that would let me record from that far away for the entire cruise? (Keep in mind most Qantas A330s fly for about 3-5 hours on average)

[@Q8Pilot]

Hey there Mika, I am not sure how can I help, but please do let me know if there is seomthing specific you need an advise for.

[@SimPilotMika]

@@Q8Pilot I mainly meant to ask if the replay tool you use can handle a 3 hour cruise recording, or is that too much of a stretch for it? Or is it only meant for short recordings like landings etc.

[@vrdrive2538]

Thank you for the video. I'm new to flight sims. I'd like to know how you stay in the airport with a top bird's eye view. Is an additional plugin required? thanks

[@Q8Pilot]

Thanks for watching, I use the drone camera.

[@Lerian_Esencia]

My terminal comes out red

[@Khaled737]

Thank you cpt 😊❤

[@Q8Pilot]

Most welcome!

[@ronloveflying]

Thanks for the tutorial. I've done exactly as you said in the video but nothing happened! It was my only plane in Heathrow airport. Can you help please? Thanks in advance, Raymond.

[@Q8Pilot]

Have you downloaded the Models?

[@ronloveflying]

@Q8Pilot I haven't downloaded the models that's why. Now ok and thanks Q8Pilot.

[@Q8Pilot]

Most welcome! Enjoy!

[@munggone]

How would this work with LatinVFR Static Aircraft? Would this be a conflict?

[@Q8Pilot]

I am not sure, but my hunch is that it will cause issues.

[@munggone]

@@Q8Pilot If you set 0 as the value for propagating gates at airports, do you suppose you would get traffic at altitude, airplanes taking off and landing, and then disappearing once they approached a gate? Just curious your thoughts…

[@Violinist_PL]

Is it only on my FS or the addon AI is static and nothing is taxiing, landing or departing?

[@Q8Pilot]

Looks like an issue at your side.

[@АртемНазаров-ъ2х]

Could somebody help me, FSTL TRAFFIC Injector wrighting failed to connect, how can i fix this?

[@Q8Pilot]

Looks like a firewall issue. I suggest you post in FSLTL discord support page.

[@mattmackenzie7168]

You have to be running msfs in the background

[@mb944]

Why do I have to get the api key for the flight data plan?

[@Q8Pilot]

It provided more accurate flight routes for you AI traffic.

[@googleisshittoss]

Looks fantastic, and am going to get it. Thank you for explaining it all so well too.

[@Q8Pilot]

Hope you enjoy it!

[@tanilojb12]

Hello friend and thanks for the video, it is quite clear, but I have a query please, can you just inject traffic with my liveries, or must necessarily work with the models to be downloaded. Thank you for your kind reply.

[@Q8Pilot]

FSLTL uses its own set so you will need to have their models downloaded in order to see the traffic.

[@sigurdolaisen8389]

Does this have the same irrational AI behavior that we see with the default AI traffic: like airliners buzzing around the airfield at treetop altitude etc?

[@Q8Pilot]

For the most part, it is well behaved!

[@shinkicker404]

a lot of that is because planes slam the brakes on when landing at taxi 90% of the runway at 10 knots this forces the following AI to do go arounds, resulting in the ridiculously silly go arounds and buzzing the airfield. So if the landings are fixed and the don’t basically stop on the runway, it shouldn’t stack up. Is that fixed @Q8Pilot?

[@reformedbrush1815]

liveries are not loading, any settings issue ?

[@Q8Pilot]

Do you have the latest update?

[@sneaky_lari6377]

One Question. How can i delete the Auto generic ai from the sim ?is it in the settings? For me the injection works Well, but i got the injection Planes + the Auto generic Files. In the Powershell i disabled the options

[@Q8Pilot]

From the Traffic Options, set the slider to 0.

[@sneaky_lari6377]

@@Q8Pilot thanks

[@prodigyshadowbs]

Just to clarify, this add on isn't available to xbox is it?

[@FlightZone777x]

nope

[@michaelmichaels9324]

Hi, freat tutorial. Thanks, question thou can i move the folder to my addons linker sub folder? thanks

[@Q8Pilot]

Yes you can! Just make sure you copy it over once there is an update as it will always download it to your community folder.

[@CraZy291]

Very nicely explained

[@Q8Pilot]

Glad it helped!

[@markm75]

Does msfs airport vehicle density slider have any effect on the traffic when using the injector?

[@Q8Pilot]

No

[@thomazz1976]

How to set up on vpilot?

[@uki-os1si]

Thank you so much

[@karlos417]

Would you have under data live real world air traffic on ?

[@Q8Pilot]

You should turn off live traffic in sim if you are using FSLTL.

[@karlos417]

@@Q8Pilot thank you was not sure

[@karlos417]

@@Q8Pilot do you use fshud I’m not getting much traffic with ftsl

[@Q8Pilot]

@@karlos417 FSHUd generates its own traffic. I used it for 2 flights and removed it. Pro ATC is much better.

[@Cappuccino29]

For me, it doesn't show that of FR24. I'm in Switzerland

[@Q8Pilot]

There is a slight delay, so it will not match what you see in real time. Data still comes from FR24 though.

[@71BoJangles]

How will this interact with the ATC controller addon FSHud?

[@Q8Pilot]

FSHUD only interacts with the traffic it generates.

[@jimvasto4479]

I hate when the injection session is terminated....

[@officiallydave4290]

I followed your steps but I am still getting floating default aircraft here and there

[@Q8Pilot]

Make sure AI traffic slider is set to 0 from the options menu and aircraft type is off.

[@thefrench8944]

thank you from France 🗼

[@Q8Pilot]

Thank you for watching sir!

[@modelrailwaynoob]

Very helpful thanks

[@Q8Pilot]

Glad it helped

[@spycommand]

much better fps than aig, but few planes missing or incorect liveries

[@Q8Pilot]

I am sure the models will be improved over time.

[@camiloelavionero]

what about performance? great video :)

[@Q8Pilot]

Thanks for watching! Performance will be affected with larger numbers. Be sure to experiment to see what numbers your system can handle.

[@alekseyrubtsov8736]

I want to see ai traffic take off and land. So far, all I've seen is the very bastard dynamics of AI aircraft.

[@rabidholiginDraco]

what does the API do?

[@Q8Pilot]

Better routes for enroute AI traffic.

[@rabidholiginDraco]

@@Q8Pilot thanks!

[@Nicolas-ol7jl]

Hello q8pilot there are rumours going around that you download your planes from rutracker?

[@Q8Pilot]

Hi Nicolas, I am not familiar with rutracker. So are referring to FSLTL downloading from that site? Sorry I didn't quite follow you there.

[@iaexo]

Where are these rumours being spread?

[@Nicolas-ol7jl]

@@Q8Pilot its a file sharing website used for pirated products

[@PONNARAK]

Will delete all AIG ?

[@Q8Pilot]

You don't have to delete it. Just move it to a temp folder and try this out first.

[@scotts6178]

Do you have to do the api step?

[@Q8Pilot]

No, but it will improve the accuracy of the AI routes.

[@gunterschneider8944]

Looks very promising, but unfortunately my sim crashed when the program is installed. Waiting for a cure…

[@Q8Pilot]

Sorry to hear that. Perhaps you have conflicing addon. You could wait for the next update and hopefully it would solve it for you.

[@gunterschneider8944]

@@Q8Pilot it is a confirmed bug. Placing the injector folder outside the community folder solves the problem.

[@SonneveldtP]

What's the benefit of using flightplandatabase? :)

[@uhFrex]

Gives more accurate routing for AI

[@SonneveldtP]

@@uhFrex thanks!

[@hogflies3208]

Sweet 🎉

[@Q8Pilot]

It is indeed!

[@theterminator3363]

Whats your pc specs?

[@Q8Pilot]

Specs in the video description.

[@RayKit]

your logo pic and name got me crying with laughter

[@theterminator3363]

@@RayKit haha

[@deanweber7093]

Not even close in realistic behaviors on takeoff and landing. PSXT+RT still 10x better in my view. But for a freeware...not bad at all.

[@RayKit]

it's not close no. but it's real world operations. with real airlines. its phenomenal.

[@mdaniels6311]

I dont care about realism, I just want LOTs of planes. I want busy airports.

[@dickytunes]

Doesn't work for me. I get some aircraft but it doesn't represent FR24

[@Q8Pilot]

It will not match FR24 exactly, there is some delay.

[@dickytunes]

@@Q8Pilot It doen't represent it all for me at EGLL. Aircraft are using completely different runways.

[@heinzgs]

Is this LGBT friendly

[@anthonyneave]

I'm blown away by how good FSLTL is. It's easy to use and install, the models look great, the liveries are appropriate for the airport, there's hardly any performance hit....and best of all, it's free! I've been eagerly awaiting FS Traffic, but after using this, JustFlight are going to have to come up with something special. I think they may have missed the boat!

[@CJeffers]

Much respect to you Q8Pilot. Your videos are clear, accurate and well produced. Keep up the great work man. Respect from St. Vincent and the Grenadines. 🇻🇨🇻🇨

[@Q8Pilot]

Thank you for your kind words and for watching the video.

[@P3ter777z]

Runs 1000x better then AIG traffic controller. Can’t wait to see your SU10 settings guide now that the driver is out!

[@Q8Pilot]

Thanks for watching!

[@sikampretmaingame1917]

@@Q8Pilot will fsltl will injected to all of airports in msfs 2020 when we ran the injector?

[@Q8Pilot]

@sikampretmaingame1917 yes

[@Q8Pilot]

@@sikampretmaingame1917 Yes

[@sikampretmaingame1917]

@@Q8Pilot based on your tutorial above. There is nothing to do more activity when we installing injector??

[@gabrielmartins5201]

Please my toolbars are showing anymore after i installed this mod, i basically cant fly a plane please help me.

[@citylimitsphoto]

Do we need to enter the data in everytime we use MSFS and FSLTL or is it a set it and forget it?

[@FerGrutta]

no , it is already recorded in the console, only that every time the injector is executed, it asks you if you want to make a change or not, if you click yes it lets you change the values, otherwise they are saved as you had left them before

[@Zenoman1234]

Hello! Amazing video, thanks for the tips. I had one question. Will this work will real world AI traffic? Do you have to install the injector for that? Thanks!

[@glenjarnold]

This software/add-on is a real game-changer. I've been absolutely blown away by it so far. I saw my sister's flight taxi and take off almost live from LGTS last night! I know what I'll be doing all day today!

[@denziiey]

Can ya'll show a close up shot? Everyone is doing a drone view. I wanna see their quality at a realistic distance. I don't expect it to be perfect I just wanna see it. Strangely every single streamer shows a drone view

[@Photoshopmanipulator]

great show. do you have to go to all those steps every time before you start msfs ?

[@Q8Pilot]

No, just once. The next time you start FSLTL it will ask you if you want to make changes. Just type "n" and enter. It will remember all your preferences.

[@jeremykangethe]

Thank you so much for the step by step process on how to do it! ❤️

[@markcunneen5167]

Q8Pilot, Please pass on our thanks to the developers and FBW for their hard work on this fantastic freeware...

[@MorrisseysMonkey]

Hmm, It didn't work for me I uninstalled my other AI Traffic add on.And installed FSLTL but when I was ready to fly I clicked the 'Ready to Fly' but MSFS kept freezing at that point. So uninstalled FSLTL and no more freezes or CTD.

[@SN57ONE]

The most frustrating thing about FSLTL was downloading the base models. They should really fix that. I had to download a free VPN server just to get the installer to download the base models faster. You know how long that took me? About a day.

[@Q8Pilot]

Wow really? For me it was a short download. What is your download speed?

[@samarthrao717]

Hi... toolbar dissappears it only shows settings icon saying custom toolbar when in start using FSLTL whats the solution

[@MaximLysakovsky]

Does it have any GA traffic?

[@Q8Pilot]

It does, but it is highly experimental at this point.

[@TheFunShow14]

I did all of this but the flybywire wouldn't install is it because I'm using a Xbox one?

[@progamerjacob245]

Whenever I try to download the base models or injector I get a windows permission error and I don’t know what to do please help

[@animaxima8302]

Uninstalled AIG a long time ago and I'm not looking back!

[@thommy2758]

FSLTL Is absolutely extraordinary, so simple yet so great.

[@LB-yj1wh]

Thank you so much. Helped me alot!

[@SonneveldtP]

Works like charm: much better compared to AIG. Thanks for this great video.

[@Q8Pilot]

Thanks for watching!

[@louislooi8705]

Thanks for sharing this is awesome!

[@JayfromCalifornia]

Awesome video as always! Will be switching over from AIG

[@Q8Pilot]

Absolutely...so much easier and even better on FPS.

[@Runway_Models1987]

can you inject 3rd party aircraft?

[@pm110978]

So we install both the Base Model and Traffic Injector even if I don’t use Vatsim at all, Correct.

[@Q8Pilot]

Correct! If you use VATSIM, you need to set the IFR and VFR values to 0.

[@pm110978]

@@Q8Pilot Thanks for the quick reply.Can’t wait to try this out 👍