Installed one of those larger 1” front sway bays, polyurethane link bushing and Bilstein shocks. Absolutely amazing ride feel and overall performance it has now. The large speed bumps at 3-5-40 MPH cannot even notice them.
@SummitRacing4 жыл бұрын
Thank you for sharing your experience!
@cuzz634 жыл бұрын
I see alot of people have trouble with the front tubular A arms...you should do a vid on common problems.
@douglasadams60242 жыл бұрын
they make these things they are called lamps or lights, not flashlight but actual lighting devices, they are used to illuminate areas that are being worked on especially being filmed, i know you must have heard of them........?
@AZpatriot69.8 жыл бұрын
this is the kit I been looking for to put in my 71' chevelle.
@SummitRacing8 жыл бұрын
+jesse j garcia sr, Great choice! Please let us know if you have any questions. Feel free to give our tech line a call at 1-330-630-0240. Thanks for watching!
@AZpatriot69.8 жыл бұрын
Will do thanks!
@Greenerplaces5 жыл бұрын
You didn't mention that the lower A frame bolts need to be tightened when the car is in a resting position on the ground ,failing to do this will preload the lower A frame bushings.
@dcso065 жыл бұрын
would have been better if there were more close ups of what you were doing.
@adolfii18933 жыл бұрын
Everytime he says "floor jack" that horrible guitar comes lol. But 100% helpful and definitely buying these.
@michaelthomas-cq9xv Жыл бұрын
WHY coilovers ?? What is the advantage ??
@oldsgamer72cutlass196 жыл бұрын
I like this kit. I want to get rid of the body roll and just wanted to give my 72 Olds 455 a newer feel. What size sway bar should I use for my heavy 455 to take out the roll feeling?
@789ghost342ghost3 жыл бұрын
Please recommend full kit front and rear for 1988 Ms131 Toyota crown thanks
@moisesnavarro30134 ай бұрын
Is there a kit for 1988 monte carlo SS
@leslie78727 жыл бұрын
I'm planning to swap my 327 V8 outta my Chevelle into my Toyota Corolla. What do ya'll think?
@carloslego16 жыл бұрын
Leslie H. Love it I was thinking of doing the same to my corolla 😂😅
@johnsheetz6639 Жыл бұрын
I believe man can do anything he wants. Just please don't put it in a Ford.lol.
@Roubaixpictures7 жыл бұрын
Where is a video for installing the QA1 rear sway bar for a Chevelle?? Thanks
@jessicagriffith324 жыл бұрын
Whats the average time frame it takes to install this kit? For medium to somewhat advanced skill levels?
@johnmilner76035 жыл бұрын
Don't forget to grease the bearings.
@juliochavez40236 ай бұрын
Do I need to add my original spacers back in when installing the tubular control arms?
@SummitRacing6 ай бұрын
Thanks for your question. Give us a call at 1-800-230-3030 or email us (help.summitracing.com/Email-Us/) to talk to one of our tech experts.
@deankay44343 жыл бұрын
Who determines the spring rate in pounds for sprung weight for a level 1 front or rear installing? This videos title may not be vehicle specific but was looking for front 67-72 C10, stock height.
@denesvillareal6906 Жыл бұрын
What is the part number for the bracket adapter where the coil sits
@Mrt42472 жыл бұрын
What's the weight difference on the A arms, from original to tubular
@gtogus7124 жыл бұрын
No parts and parts numbers listed in the description , kit descriptions ?
@SummitRacing4 жыл бұрын
Hi gtogus, we are so sorry about that! Here is a link to the product. www.summitracing.com/search?GroupBy=ProductName&SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=QA1%20Handling%20Suspension%20Kit%20Installation
@marclehmann16478 жыл бұрын
Hi, have an 1977 ElCo. Its called an A Body frame too, but the Kits are only till 1972, so do u have any Ideas for me, to get a Kit like this? oder i have to buy some Shocks of QA1 Lower Arms from Global and so on?
@bryanwolfinger53905 жыл бұрын
Hi there, is this kit or one better made for a 1977 Mercury Comet GT with a V8?
@jeanvillanueva21863 жыл бұрын
1968 chevelle malibu?
@josephsmith9802 жыл бұрын
Do you have this kit for a b body. Delta 88 coupe 1983
@rorydaddy3 жыл бұрын
I just took these OFF my 70 El Camino, it Drove Terrible, I put the stock stuff back on, Junk Beware
@glifikskils37923 жыл бұрын
Do you guys do installs at summit racing?
@shanewilson22705 жыл бұрын
What's the difference in the qa1 trailing atm??
@limited50scla4 жыл бұрын
For the qa1 tubular control arms/coil over kit. Do you have to get drop spindles? Or can you use the stock ones and possibly keep stock ride height?
@SummitRacing4 жыл бұрын
Hi Mike, Can you give us a call? 1-330-230-3030? We need some additional information from you.
@rollinassassin94998 жыл бұрын
Is there a kit for a 1965 impala ss
@SummitRacing8 жыл бұрын
+RollinAssassin, QA1 has a new bolt-in front coil-over kit for the ’58-’70 Impala and also offer the Stocker Star noncoil-over shocks for these cars. Unfortunately, they do not have the handling kit available for full-size cars, yet! Here are some of the part numbers for you Impala: www.summitracing.com/search/brand/qa1-precision-products/ QA1-GS507-09450D QA1-GS507-09550D QA1-GS507-09650D QA1-GD507-09450D
@rcm38515 жыл бұрын
I'm having clearance issues between the springs and the rear axle on my 72 chevelle. Any suggestions?
@joeymejia7944 жыл бұрын
Damn it’s been a year I hope you figured it out man
@adolphuslast17316 жыл бұрын
Great video
@rjprice8 жыл бұрын
Are these a universal fit? Will these shocks fit my 03 s10? Thanks!
@rjprice8 жыл бұрын
What front and rear shocks would you recommend for my 2003 s10?
@rcairforceone6 жыл бұрын
Look at the GM G-body parts for fitment in the front.
@terranceroybal32224 жыл бұрын
Can you do a 4 link?
@SummitRacing4 жыл бұрын
A video?
@SummitRacing4 жыл бұрын
We have many different universal an direct fit 4-link kits. www.summitracing.com/search/part-type/suspension-link-kits Or are you requesting a video on 4-link kits?
@gtogus7124 жыл бұрын
67 GTO ??
@SummitRacing4 жыл бұрын
Here are the kits available for a 67 GTO www.summitracing.com/search/brand/qa1/year/1967/make/pontiac/model/gto/part-type/suspension-handling-packages?N=part-type%3Asuspension-handling-packages&GroupBy=ProductName&SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=QA1%20Handling%20Suspension%20Kit%20Installation
@lesterwentworth45028 жыл бұрын
is there a kit for a1978ford pinto ???
@juanmarquez7441 Жыл бұрын
Were smartest people that put that factory suspension than those guys that supposed to be make improvement but only get to ruin the smooth running of originals suspension.That ideas are for making money from the modern factories which build auto parts in this time not a big deal . They should improve the comfortable driving instead of destroying the dreams of people lived a long time ago who deserve respect for their memory
@roxicake.fan12 жыл бұрын
Que
@hollyrock9115 жыл бұрын
Summit is awful.
@bootyman2344 жыл бұрын
Why aren't more control arms sold with the center mounting bar already installed... so we don't have to F*^K with them when we replace them? I mean how much really would it add to the cost?