QA1 Handling Suspension Kits

[@twinedgarivan3668]

Which one is the correct one for 1972 Monte Carlos

[@Macnificent78_]

Does qa1 offer front end steering Component like tie rod inner and outer sway bar link ball joints all that good stuf

[@QA1TECH]

Hi there. Our handling kits do come with all the hardware to mount these components and most of our kits come with tie rod sleeves.

[@ghtrcp7554]

Can we use level 3 kit in daily driving? I use 75 Trans am daily with 142 blower. And İ want to turn corners hard and safetly..also stablity at high speeds. Should ı chose 600 lbs springs..

[@betosgarage]

For g body , are the double adjustable that much better than the single? Or will the single adjustable do the job for a daily street driven car

[@QA1TECH]

The Single Adjustables will definitely get the job done! The Double Adjustables are more for someone who is looking to competitively race their car.

[@betosgarage]

QA1 thanks, can you provide the part number to the single adjustable for g body? For the fronts

[@QA1TECH]

@@betosgarage Look for this part number. HK02-GMG1 This is for the 78-88 G-Bodies.

[@betosgarage]

QA1 thanks !

[@mrknebel475]

can you guys start making stuff for mopar c-bodies?

[@jasonseigfried8941]

Depending on the year it all pretty universal after 67 for Mopar. And even then there's a lot of cross compatiblity across years. I've got front calipers and rotors from a 75 volare on my 66 valiant wagon.

[@reginaldbwitherspoon]

Where can i find the price for the kit to my 1994 chevy c1500?

[@aaronsbuildinggarage5074]

I'm rebuilding a 72 Plymouth Duster on my channel and want to redo my suspension.. but I also want to lower the car about 1.5 inch. any products?

[@dwjuanmilton5617]

I have 70 impala I want to upgrade my suspension , I think I need the 2 where do I get it at

[@QA1TECH]

We recommend ordering through a dealer for the best deals on pricing. If you want the level two kit, part number HK02-GMB3. www.QA1.net/find-a-dealer

[@sneedsspeedandfabrication]

so i have a 71 lemans. im wanting to go the handling route, but this car wont be a high end racecar, so i know level 3 is a no go for me. I would still like the car to sit at factory ride height and ride smooth, but i would like it to handle well if i come across a nice backroad and occasional track/autocross use if the chance arrives. what would you suggest for me?

[@QA1TECH]

The level two kit would be a good option! But our coil-overs will lower the car automatically.

[@sneedsspeedandfabrication]

@@QA1TECH as long as it it isn't excessive that wouldn't be an issue

[@QA1TECH]

@@sneedsspeedandfabrication The max lowering would be up to 2 inches.

[@sneedsspeedandfabrication]

@@QA1TECH thats perfect then

[@QA1TECH]

@@sneedsspeedandfabrication Here is the part number you would want. HK02-GMA2 We recommend ordering through a dealer for the best deals on pricing!

[@richardcamacho8263]

A level2 kit for a 89 Chevy caprice could you provide a kit item Num ?

[@QA1TECH]

Hi there! Depending on what you want to do with the vehicle, we typically recommend the level two kit. HK22-GMB4 You can find great pricing through our dealers! www.QA1.net/find-a-dealer

[@dopie5817]

Are these available for an 87 cutlass supreme

[@christianescobar9806]

hi, do you guys offer a kit for a 95 Toyota Pickup?

[@sleeks9939]

I wish there was one for Toyota pickup 😯 I am down to donate my truck for a test fit 😉😁👍

[@GeneralZ]

Hello i have question, i'm trying to buy a full suspension kit for my 1969 dodge charger R/T ( normal daily use). is this suspension kit is good or do you prefer something else

[@QA1TECH]

Yes! The beauty of these kits is that they are designed for all types of driving. I would recommend level 1 or 2. The only difference is that the level 1 kit has non-adjustable shocks and level 2 has single-adjustable shocks. Depending on what your goals are, I would recommend level 2 because that gives you the opportunity to adjust your rideability the way you want even more than the non-adjustable shocks would.

[@riccjames6514]

A1 Suspension kit front and back for my 86 Buick regal gbody

[@QA1TECH]

We do offer complete handling kits for the G-Body! HK22-GMG1

[@alfredvazquez5920]

rear sway bars by the way

[@georgegomez9879]

Products look good but take along time to get delivered took 3 months to get part of kit and still waiting on upper control arms so don’t hold your breath just saying hehehehe

[@QA1TECH]

We do apologize for the delay in getting your products to you. We are shipping every day and have started to see improvements on receiving raw materials. Hopefully we can get the remainder of your kit to you ahead of schedule. Thank you for your patience and understanding.

[@hotrodmtf]

Are these kit available for the 65-70 Mustang ?

[@QA1TECH]

At this time, we do not offer these kits from 65-70. They start at the 79 body style.

[@hotrodmtf]

@@QA1TECH that's to bad we specialize in the 65-70 :(

[@andrea4809]

The hotchkiss kit for the 65' is great. I have put one on .it installed and worked great! @@hotrodmtf

[@gentlemonsterkennels]

Can you please provide a link for a 2012 mustang gt handling package? It has 75k miles, daily driver, and has been in two accidents. It is really bouncy on the road. I am looking for a handling package that helps on the straight: 0-60 and 1/4 (I plan on taking to the 1/4 mile only. No auto cross). But I also would like it to handle better than stock on the highway. Thanks

[@QA1TECH]

Sure thing! Here's the link to our Drag Racing Suspension Kit page: www.qa1.net/suspension/drag-racing-suspension-kits/ford-drag-racing-kits/11-14-ford-mustang-drag-racing-suspension-kits

[@kpbla204]

Does qa1 have any kits or parts for 3rd gen ram 1500 ?

[@QA1TECH]

We currently offer front and rear shocks for the 94-01 and 02-08 2WD 1500 Ram.

[@kpbla204]

@@QA1TECH will there be any kits available or done in the future for this application?

[@toughsuds9502]

Which kit is good for a 79 money Carlo

[@QA1TECH]

Hi there! Depending on what you do with your vehicle, we typically recommend the level two kit. HK02-GMG1

[@vikasjagadeesh2901]

do you have a street kit for Vauxhall Victor VX4/90 or Victor FE series

[@QA1TECH]

Unfortunately we don't offer a kit. We may be able to get some shocks that will help you out if you email [e-mail].

[@harryw3910]

I have a 1963 nova wagon what do you have for my car ?

[@QA1TECH]

Currently we only offer front and rear non-coil-over shocks.

[@donmitchell842]

Do you have a tuberler control arm for 1998 chevy truck kit's

[@QA1TECH]

It is on the radar!

[@kimiperez5611]

I have a 1973 dodge charger, does kit for the 1971-1972 fit in the 73 ??

[@QA1TECH]

Sorry, no. But we could work up some adjustable shocks for you.

[@phillipsydnor1583]

What all would you say I need to do to safety have 26s on a 89 caprice

[@QA1TECH]

If you are just looking to upgrade your street car, we would recommend the level two handling kit.

[@HodgePodgeGarage]

Can these kits work with a stock 1972 Plymouth Satellite 400 big block K-Member?

[@QA1TECH]

Hi there, we do have a kit for your car. You can find it here: www.qa1.net/suspension/handling-suspension-kits/mopar-handling-kits/71-72-mopar-bbody-70-74-ebody-handling-suspension-kits Thanks!

[@HodgePodgeGarage]

Thanks. I saw the kit for my car with the kMember. I was more interested to see if you had one that worked with the existing original kmember.

[@HodgePodgeGarage]

Also...do you have the knuckes

[@QA1TECH]

Everything except the sway bar will bolt up to the factory k-member.

[@QA1TECH]

Sorry, we don't make the steering knuckles.

[@apalominos9536]

What kit level do you recommend for a 81 trans am ls1 swap?

[@QA1TECH]

It depends on what you do with your vehicle. We typically recommend the level two kit for people who are looking to upgrade their streetcar. It also performs well for some racing. If you are looking to be competitive on the track, then we would recommend the level three kit.

[@apalominos9536]

QA1 looking to drive the car for long distances and daily drive the car while still being able to hit hard corners if I want to and have that modern day car suspension.

[@QA1TECH]

@@apalominos9536 Then we would recommend the level two kit! HK02-GMF2

[@albertoreyes6631]

Hola QA1 solo español. Soy el sr Alberto de Mexico y tengo un dodge dart 1969. Quiciera saber si tienen algún proveedor en la ciudad de mexico Necesito accesoria sobre mi suspencion.

[@bc1953]

F-body kits?

[@campervanbug7658]

Do you have a level 2 kit for a 62 impala

[@QA1TECH]

We do not at this time. We currently only offer front adjustable coil-overs and rear shocks.

[@campervanbug7658]

@@QA1TECH 😒

[@nightbasser73]

Wish you all had these kits for the 99-06 silverados

[@QA1TECH]

We did just release front coil-over shocks for those trucks. Hopefully we offer more products in the future for you guys!

[@sergioaboytes5998]

hey do you guys have coilovers for a 2011 chevy impala lt?

[@QA1TECH]

+Sergio Aboytes Unfortunately, we don't have any coilovers that will work. We're always looking for ways to expand our line, though, so thanks for the suggestion!

[@alondrachavez1239]

Are these kits available for a 1974 Dodge Charger?

[@QA1TECH]

As of right now, we do not carry a handling kit for that year Charger. This is something that is definitely on our radar!

[@boneapart69]

What about now?

[@joeynelson4091]

What about later a body mopars

[@QA1TECH]

We have suspension components available for the 64-66, 67-72, and 73-76 Mopar A-Bodies. Head over to our website, enter your vehicle in the vehicle filter on our homepage and you will see what we offer! www.QA1.net

[@The_Frizz]

are the gm a body control arms designed to improve the positive camber gain problems of the stock spindles or would it be beneficial to change to pinto spindles while you have it apart

[@QA1TECH]

Yes, the arms are designed to give you a better camber gain than the original components. We also have ball joints with extended lengths if you need to fine tune it further than that.

[@chuckhole78]

Do you have a kit for an 1987 Chevy S10?

[@QA1TECH]

chuckhole78 sorry no official kits, but we do offer bolt in front coil overs, front upper and lower control arms, and rear adjustable shocks for an 87 S-Series truck.

[@ramibanjer]

Do you find you have kit to my car ? 1987 caprice

[@QA1TECH]

Hi Rami, We don't currently offer a kit for a 1987 Caprice, but we're always adding new applications. Thanks!

[@ramibanjer]

If you do call me .

[@QA1TECH]

www.qa1.net/about/news/qa1-expands-offerings-of-suspension-kits-for-gm-b-bodies

[@trentonclyne7179]

Do you have a kit for 86 camaro

[@willfry4545]

How much for a level 3 kit for a gbody

[@QA1TECH]

Go to your preferred performance parts dealer and they can work out pricing with you because it will be cheaper going through a dealer. www.qa1.net/dealers Or feel free to call our tech line with any questions; 952-985-5675 we're open M-F 8am-5pm CST.

[@parayi]

hi do you have kit for a Plymouth Valiant A body model 75?

[@QA1TECH]

+parayi While we don't have a specific kit part number for your application, do we offer a lot of products for your the 75 Valiant, including shocks, control arms, strut bars, tie rod sleeves, torsion bar adjusters, camber bolt adjusters and our rear suspension conversion kit. Visit www.qa1.net/vehicle-search and input your vehicle for part numbers and links to the products on our website.

[@QA1TECH]

+parayi You can also visit www.qa1.net/mopar for a complete listing of our Mopar products.

[@albertoreyes6631]

Me gustari cambiar mi suspencion

[@johnnyreb8030]

I want to drop off my 86 c10 and do suspension I write a check and drive home.

[@QA1TECH]

Hi there! We do not do installs. We just make the parts! You would have to find a local shop that would be able to do the install for you.

[@michaelanderson5108]

There must be a disconnect....phone is never answered....email response is automated. That’s a piss poor way to run customer service

[@garyr481]

71-73 Mustang? Nothing? Come on man!

[@QA1TECH]

Sorry, at this time we only offer front and rear non-coil-over shocks for that Mustang platform.

[@rodolfoacosta7454]

Would. U have a kit for my 1970 Pontiac Catalina

[@QA1TECH]

Sorry, just for 78-81 Catalinas but I'll put in a request for you.

[@shawnpullen9517]

I own a 1971 nova do you make a stage 2 kit for my car if so could you give me part number.

[@QA1TECH]

Hi Shawn, we do make GM X-Body kits, and the part number for a stage 2 handling kit with shocks is HK02-GMX2, thanks!

[@shawnpullen9517]

@@QA1TECH I was looking for front and rear coilover I've seen several novas with complete coilover suspension.

[@QA1TECH]

@@shawnpullen9517 We just have the front coil-overs and rear adjustable for your application, thanks!

[@luckystrike656]

Its a shame that there is nothing for "normal" cars

[@sleeks9939]

But not for TOYOTA PICK UPS😭😭😭😭😭 I can send my 1986 for test fitting.😁

[@altapotenciaLMK]

Para automoviles Toyota camry 1988

[@Mr.Reign910]

Do you have a kit for a 79-79 Chevy impala?

[@QA1TECH]

Hi there! Yes, we offer full handling kits for the 79 Impala. www.qa1.net/suspension/handling-suspension-kits/gm-handling-kits/78-93-gm-bbody-handling-suspension-kits