Рет қаралды 1,088,307
Newer version, more compatible : • How to Program Remote ...
www.aliexpress...
Link from DE: www.amazon.de/...
In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, while such remote control has not be developed. You may configure your remote control within 2 seconds if you meet the following three conditions:
Condition I: the original remote control may be used normally
Condition II: frequency of original remote control is 433Mhz
Condition III: IC model of original remote control is 2262 2260 1527 2240 and compatible IC (rolling code remotes will not work)
Application method:
1.Clear the copy remote controller: Long press the above two keys at the same time and release your hand when the light flash quickly.
2.Copy: Press the button of the copyed remote control with one hand, and press the button of the new remote control with the other hand, keep for a few seconds
3.Use:If all the above operation succeed, the romote control can be used dirtectly. If it can not work, please operate again from Clearing
4.Recover: If you meet misoperation and cancle useful codes, before re-copy, you can press the below two keys at the same time for 2 seconds and release when the lights flash quickly, then the control will be recovered