QIDI Tech Q1 Pro - Klipper 3D Printer - Unbox & Setup

  Рет қаралды 9,473

Just Vlad

Just Vlad

Күн бұрын

Пікірлер: 32
@JustVlads
@JustVlads 5 ай бұрын
Buy Q1 here: geni.us/nTgRnw Recommended: geni.us/JustVlads
@Kimberlie1
@Kimberlie1 5 ай бұрын
You only need to do automatic bed leveling and input shaping. You only need to do the third step of manual leveling according to the tutorial if you still feel that the automatic leveling of the heat bed is not quite accurate. If you look at the bottom of the heat bed, you will see knobs on both sides.
@johnnycabafc
@johnnycabafc Ай бұрын
and one in the centre at the back
@JoeMcMullin
@JoeMcMullin 4 ай бұрын
Your reviews are crazy detailed! Aside from all the amazing features you demonstrate what other creator on KZbin covers things like the rubber feet and manufacturer information plates 🔥🔥 Also, who else takes apart printers to show viewers how well printers are built. Great job, new subscriber here.
@danbrown586
@danbrown586 3 ай бұрын
48:50 I don't think what you're seeing there is a software problem, particularly since you didn't see the same issue with the other rocket--you're looking at a partial clog in the extruder.
@jayson8118
@jayson8118 Күн бұрын
Can't say I am impressed with the prints. Whether it's the firmware or something else. I hope recent updates has improved the print quality.
@FuIImatiK
@FuIImatiK 5 ай бұрын
guessing you had this printer for awhile before reviewing it? seems you got the model before lot of the upgrades and fixes QIDI implemented. @36:42 have a link to that file?
@socketyellow3
@socketyellow3 5 ай бұрын
What would happen if you leave the doors closed with pla? Also is there a non toxic filament that I can use to have this in my room while watching tv or something? Like I don’t expect it to be quiet but closing the doors probably would help noise. The aux fan apparently is the loudest when it’s closed so might look for a more quiet replacement Not really needed just little nitpicks, most of the time probably won’t matter as I don’t expect to let it run overnight.
@NotxKaapi
@NotxKaapi 5 ай бұрын
On a long print the enclosure can get warm enough to cause heat creep and nozzle clogging
@alexgibson7960
@alexgibson7960 5 ай бұрын
These videos are very addicting.
@TheCuteShops
@TheCuteShops 2 ай бұрын
I just buy the QIDI Q1 Pro but I have problem for print, I check the temperature on hotend with thermal camera and i see I have only 72 deg C maximum on hotend outside when I setup for PLA 220 deg C. If you can please check with thermal camera what temperature on hotend you have on your Q1 Pro, thank you.
@notchipotle
@notchipotle 5 ай бұрын
this is clearly an older version, just like creality K1, they fix a lot of thing, it's sad how some companies sell unfinished product just to keep up with the market
@BarrieCowley-hm4cs
@BarrieCowley-hm4cs 5 ай бұрын
I know this is for comments on the video but I am stuck literally.I am unable to log on to Wifi and I do not know how to get Klipper or Orca slicer ,any help would be greatly appreciated. I have printed the included models and they are perfect but only in Pla and this was bought to use Abs Asa etc. Help please.
@gillesreyna1272
@gillesreyna1272 5 ай бұрын
Hi, Klipper is already on the machine. Wifi should work out of the box, it's dead easy unless your printer has an issue. you can also use it with an Ethernet cable (haven't tried it) but really Wifi should work. If you're absolutely sure about your network password then send an emailto Qidi support (email written on the printer I think), they're super responsive (mention your order number, it will save you a couple of emails !). There is no point to talk about klipper and Orca till you get your Wifi setup ok.
@Collateralcoffee
@Collateralcoffee 5 ай бұрын
Why is everyone testing the old one?
@KirbyJr
@KirbyJr Ай бұрын
how long did the trash can take wow
@Hstrow
@Hstrow 5 ай бұрын
u have printer outdated before revision. i have after revision and there is lot of changes and improvements
@hipton1989
@hipton1989 5 ай бұрын
How do i know if i have the revision or not
@PaulKostrzewa
@PaulKostrzewa 5 ай бұрын
@@hipton1989 The older version had a pigtail bowden-thing off of the back instead of a port on the left side for filamant loading, also the build plate used to have a single center stop while the newer version has a stop at each back corner. Mine also has an RJ-45 port for network connectivity which I believe the older version dindn't have.
@Hstrow
@Hstrow 5 ай бұрын
@@hipton1989 and also bed has more magnet becauses testing version had only 3 and bed was raised when asa printed. and bowden tube with wiring should not touch to top cover anymore .
@hipton1989
@hipton1989 5 ай бұрын
@@PaulKostrzewa that kinda sucks i have the old one, but its been working great so cant complain to much
@NoMercyFtw
@NoMercyFtw 5 ай бұрын
You need to tighten your belts, and some printers do better with other slicers
@Roblox11233
@Roblox11233 4 ай бұрын
Can you unbox the ps5 slim next
@Alice0519M
@Alice0519M 3 ай бұрын
Brown Michael Allen Joseph Rodriguez Karen
@HectorBlankenship-h6j
@HectorBlankenship-h6j 3 ай бұрын
Hall Elizabeth Robinson Mary Hernandez Kevin
@watchfirst-p7z
@watchfirst-p7z 2 ай бұрын
Hernandez Charles Walker Elizabeth Hernandez Eric
@TheresaLopez-r7t
@TheresaLopez-r7t 4 ай бұрын
Hall Brenda Thompson James Davis Angela
@BillAthey-b1t
@BillAthey-b1t 3 ай бұрын
Hall Christopher Robinson Deborah Smith Brenda
@HuttVita-w2o
@HuttVita-w2o 2 ай бұрын
Thomas Kimberly Martin Shirley Jackson John
@pauleedavidson9251
@pauleedavidson9251 3 ай бұрын
Robinson James Jones Jason Lewis Susan
@SharonThompson-s3c
@SharonThompson-s3c 3 ай бұрын
Gonzalez Jason Harris Elizabeth Allen Eric
@JoanHernandez-j4p
@JoanHernandez-j4p 3 ай бұрын
Davis Eric Lewis Ruth Johnson James
Обзор QIDI Q1 Pro - Гадкий утёнок
31:53
K3D tech // Dmitry Sorkin
Рет қаралды 40 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
Qidi Tech Q1 Pro - Обзор 3Д Принтера
19:09
Уголок технаря
Рет қаралды 23 М.
QIDI Tech PLUS 4 - unbox, setup and first prints.
19:31
MrTeslonian
Рет қаралды 4,6 М.
I've Been Keeping a Secret | QIDI Q1 Pro 3D Printer Review
13:19
The QIDI Q1 Pro is the best-kept secret in 3D Printing
15:14
Rist Innovations
Рет қаралды 10 М.
QIDI Q1 Pro - Can it compete with BambuLabs?
12:01
Vector 3D
Рет қаралды 16 М.
The 3D Printer I'd buy if I started over
12:56
Shop Nation
Рет қаралды 2,6 МЛН
Every Single Filament Part 4: CURSED FILAMENT!
59:09
Zack Freedman
Рет қаралды 898 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН