QPAS Melodies with 0-CTRL

Using unquantized CV from 0-CTRL to sequence QPAS (and Mimeophon).
www.makenoisemu...

[@XanderEwald]

I can see myself spending my retirement years with this setup. "Want to join us for some shuffle board?" "Nah! But have fun!"

[@MAKEN0ISEMUSIC]

Shuffle board is tempting though but yeah :P

[@alaeifR]

*head bopping* "Nice!"

[@seanspartan2023]

I can't believe the sounds you're getting from a filter and delay module

[@GeorgeLocke]

Given that onnimation isn't a word, it defies all logic to insist on pronouncing it "qposs"

[@MAKEN0ISEMUSIC]

hmm... pondering this comment while watching wasps wash pasta off a swan in a swamp ;)

[@GeorgeLocke]

@@MAKEN0ISEMUSIC sure sure. I regret being such a twerp about it. It's a filter, so you immediately think q-pass, and the underlying acronym supports that intuition, so it seems like pure caprice to insist on "q-poss", a gesture seemingly intended to permit those in the know an opportunity to correct the poor plebeians... But alas, I'm at least as ridiculous to care so much about it...

[@MAKEN0ISEMUSIC]

I think Tony just likes the way it sounds with the short “o” sound. I used his voice saying it in the intro animation so that everyone would hear the pronunciation straight away 😊

[@BlueSB017]

I have the Mimeophon arriving this week to complete this setup. Can't wait!

[@MAKEN0ISEMUSIC]

Happy patching!!

[@EleniEliades_]

But hey. . .the sounds you created out of those modules plus the 0-CTRL were amazing. Could you please stand up in the next video so we can all see how utterly " ripped " you are ? 🔥👀💦

[@MAKEN0ISEMUSIC]

We are hoping to *gain* viewers not lose them 😅

[@serdarsaydan]

i love all my make noise moduls sooooo much because they brought soooo much value to my system/knowledge. amazaing whats possible with the qpas but its tooo juicy,,,, too juicy for me 😅🥹😅🥹

[@stevecurcuru]

Great demo and excellent patch! QPas works great as a voice, I’m finding to more fun to ‘ping’ lately

[@MAKEN0ISEMUSIC]

It makes some fantastic classic "west coast" sounds too :)

[@cooloutcoexist]

Oh cool, that just gave me the idea to get two different intervals from L and R and then switch throught them with my Doepfer VC Switch. Great videos recently. They are great creative input! :-)

[@MAKEN0ISEMUSIC]

nice idea! you can also carefully tune and sequence one or both Radiate inputs for chord sequencing. it would take more meticulous turning than we could really show in video but I think it could be worthwhile!

[@richarquis]

I already have the 0-Ctrl and 0-Coast, plus Maths, Q-Pas and X-pan in my system, and XPO and Mimeophon will be arriving next week. I knew that Mimeophon is often used as a sound source, and I knew filters could be pinged, but I really had no idea just how far those ideas could be taken. This is a real eye opener.

[@jgsj2]

Excellent,, love the moral . Thank you for creating and sharing

[@christopher_ecclestone]

I have an original Maths, and I never understood how or why to use the Cycle trigger on the new Maths, but this is a great example, and makes me want a new version of Maths. Is there a work around to trigger cycle on the original Maths, or is it only possible on the newer version?

[@MAKEN0ISEMUSIC]

For Ch4 you could patch the EOC through a VCA and on to the Ch4 trigger input. Send a gate to open your VCA and this will roughly emulate the CYCLE input.

[@christopher_ecclestone]

@@MAKEN0ISEMUSIC Thank you for your reply, I'll try this tonight 🙏

[@cnic7085]

Still luvin the 0-cntrl.

[@MAKEN0ISEMUSIC]

Me too!

[@0neTwo0neTwo]

around 6:00 when you turned off the cycling MATHS, where is the mentioned "FM" happening in the patch?

[@jacobstern2150]

After that, he sends gates to the Cycle input of the Maths which causes it to oscillate during certain steps. While the gate is high, the QPAS filter pings are being frequency modulated by the Maths channel, since Radiate modifies the frequency of the filter peaks.

[@0neTwo0neTwo]

@@jacobstern2150 dope thanks for the explanation. I wa slike i dont remember a FM input on QPAS but yeah I wasnt thinking of it that way.

[@jacobstern2150]

@@0neTwo0neTwo Ye and it's extra cool because the peaks are being FM'd in opposite directions! Though, come to think of it, I have no idea if or how this actually affects the sound lol

[@MAKEN0ISEMUSIC]

the effect of the opposite direction FM would be more apparent at slower frequencies, probably not much difference at audio rate like this. for tuned FM you typically use a bipolar wave and a linear input, neither of which is present in this patch :D

[@0neTwo0neTwo]

@@MAKEN0ISEMUSIC so the opposite direction is a natural occurrence? i thought the direction of the modulation for each side was determined by where we set the attenuverter?

[@NigDub]

I tried this with Rene and my Forbidden Zone filter. The pitch was still all over the place :D

[@CinematicLaboratory]

Wonderful patch!

[@MAKEN0ISEMUSIC]

Thanks! :)

[@walrtbstudios5430]

I definitely underuse my 0-Ctrl- but I have all these modules, and now I have your idea to play with. Thanks!

[@Frozen_Smoke1972]

Every time I watch one of these videos, I'm taken aback by the sheer insane versatility of this set-up. And, as always... Oof!

[@MAKEN0ISEMUSIC]

Glad you liked it!!!

[@jeffreymfletcher]

Great demo, so much fun with these ideas.

[@electricdawn2258]

Beautiful!

[@DK-qe6uo]

Dang Walker…you’re the best man. Once that sequence comes in. I’m selling some stuff to try and buy this system. So cool

[@MAKEN0ISEMUSIC]

Glad you enjoyed it!! ⚡️

[@MartinDoudoroffLLC]

I like this video.

[@MAKEN0ISEMUSIC]

It may be mutual :)

[@gregonater]

Really enjoyed this one. I don't experiment with pinging my filters or mimeophon enough. Might try to mess around with something like this with my Rene, SSF Stereo Dipole and my mimeophon later.

[@MAKEN0ISEMUSIC]

Happy patching!! :D

[@michaelshenton5760]

Is there a way to do this without maths in the equation?

[@MAKEN0ISEMUSIC]

This particular method involves generating functions from a transient-detecting gate source, and I'm not sure there's a way to do it without MATHS, at least within our system. If you have some way of offsetting the envelope follower CV downward then you might be able to gate a standard ADSR with it but it would depend on the particulars of the modules in question. If processing some audio that is not Morphagene-derived then you would also need a slew limiter to use as an envelope follower.

[@RiccardoCoen]

Oh... Rolex

[@MAKEN0ISEMUSIC]

Nah 😆

[@martintaylor9205]

Thanks Walker exactly what I asked you about last week Ocontrol to module To tune you could put a guitar tuner on main output to mixer superb

[@MAKEN0ISEMUSIC]

:D Thanks!!

[@cnic7085]

Hey Walker, not directly related to this patch, but been trying to figure out the rnd gates from the woggle. The manual says that the are related to the main gate stream, but in practice it's difficult to discern that. Are the rnd gates a subset of the gate stream or something more devious?

[@MAKEN0ISEMUSIC]

It's kind of about the relation between the sampling clock and the Woggle output, but also affected by just about every part of the circuit

[@cnic7085]

@@MAKEN0ISEMUSIC Interesting. Thanks Walker. So like most of the bug, a largely inscrutable, but enthusiastic collaborator! :)

[@elyssapalmer2298]

Next can you teach us to tuna fish?

[@MAKEN0ISEMUSIC]

i've heard that can't be done, which is a great reason to try it :D

[@tangledwaves2659]

So friggin' awesome!

[@MAKEN0ISEMUSIC]

Thanks!

[@WiredSpaceWizard]

Outstanding!

[@MAKEN0ISEMUSIC]

Thanks! Glad you enjoyed :)

[@etfy4953]

magnifique !

[@michaelrutchik9906]

Brilliant!

[@MAKEN0ISEMUSIC]

Thanks!

[@shinyless]

Looks like a nice seq, too bad it's defective by design : I had to return mine twice because the plates wouldn't respond to touches, had to ask for a refund...

[@fedesartorio]

I bought a qpas today so I’m watching a few videos about it.. I’m just wondering why you’re sending a constant voltage to the input!

[@MAKEN0ISEMUSIC]

QPAS responds with resonance to pulses at the input. Holding the input high and pulsing at the VCA instead gives a different response (sharper, in my experience).

[@foobarbazqux]

Walker- y’all need to run mic & synth separate yo! You’re missing an opportunity to showcase the nuances of MN sound while demoing the patch. Streamlabs OBS can do it easily- I think there’s room to slap an ES-8 on the end of that skiff and you’re golden.

[@MAKEN0ISEMUSIC]

Mic and synth are separately mixed.

[@foobarbazqux]

MAKEN0ISE Hmmm... I listened again- maybe it’s the the mic and room noise. Possibly sound direct through mix and sound from room mic are conflicting - I’d be interested to hear the audio of same presentation with you wearing headphone w/mic. You don’t have to wear a gamer headset - there’s other options!! 🤣 Love y’all! Have a great day and keep pushing the envelope