We All Make MISTAKES | Learn From Them…

[@theegoat1936]

I'm mainly a sheetmetal guy, but today I was able to accomplish a full furnace replacement all thanks to your positive attitude towards things.

[@laymanstermsoutdoors5123]

First 2 numbers “15” is the week it was produced and the next 2 are the year “86” So that was produced the week of march 23rd-29th in 1986.

[@warenmann1042]

The same year we lost the good ship and crew of the Space Shuttle Challenger...

[@Dante-yt3it]

At least for allied units the A is actually the month of manufacturing. So I think januray '86. Carrier could be different but allied has the same lay out. Model, year, letter, then the units number

[@zeph352]

a very important factor to consider when changing an air conditioning system; especially the air handler, is to verify the static pressure (sticker I.W.C old unit) with which the duct system was designed, select the speed of the fan blower so that it operates at the balance graphic point for the friction rate established in the calculation of the distribution ducts, otherwise, instead of obtaining better performance with the new unit, more energy consumption and loss of efficiency are generated.

[@zahedaminullah6934]

Good job once again for your quality videos, keeping the camera in a spot where we can see where you go,makes your videos stand out way better than other hvac vids! Keep up the good work man! Your van is nice and clean and organized as well!

[@QualityHVACR]

Thanks 👍

[@Negative13Prod]

We always use a flush kit. Much easier to clear liquids. I would worry if there’s a kink in the line, the plug would get stuck.

[@QualityHVACR]

I hear ya. If that’s the case, I’ll know to locate and fix the kink.

[@henryharris3431]

​@QualityHVACR If it's inside a wall chase then we're SOL. That's what I would be afraid of.

[@WGwarrior20]

What about if there's a kinked some where in the lineset and you use that cleaning kit.

[@rosariosalafia6697]

Hey, just wondering about the range plug. NEver seen that done up here in the north east.

[@IDrag]

8:28 i need a link to that phone case lol

[@Subcooledsuperheat]

I agree. It’s a 86 model. Do you have full time employees now? Or did you find a good sub? As always great video.

[@QualityHVACR]

They are a sub for change outs.

[@hunterhill1013]

I think thats an '86

[@CommercialGasEngineerVideos]

I think you're right

[@henryharris3431]

Yep. 2nd two digits of the serial.

[@pedrojuarez5834]

that change out looks great went above and beyond. if it was a average installer , would have not relocated the condenser and have only left it alone never the less you'll did good for relocating the other condenser to have plenty of room to service it. HVAC installer here out of Nacogdoches,Tx

[@yelsincruz8663]

Nice presresing inside the furnace.

[@TheSKIFTW]

Do you have a tour of youre vans ?

[@Uncajondesonrisas]

9:35 here too lol 😂

[@kinstonboy1]

Where's the condenser pad's at???

[@clevelandtyler2]

You must live in Murfreesboro! Great video brother. Nice work guys!

[@dejanmyrtaj1997]

up to how many degrees celsius the external ambient temperature can the motor of the split and vrf air conditioner withstand, minimum and maximum temperature

[@actechchris]

‘86. 3rd and 4th digits. 👊🏻 keep up the good work!

[@richardthomas1743]

HEY! Hello and Happy Sunday!

[@robalexander7348]

Thanks Zac, a nice interesting video, and nice quality camera work 👍 Au

[@jacobbarger1427]

Am I the only one wondering how he had his phone attached to the side of the disconnect at 8:17?

[@mattluongo7763]

didn't notice until you said something but it looks magnetic which is actually pretty cool and I want one.

[@mattluongo7763]

1986 handler I believe, they were good units which is why its still there.

[@oliverpernillo9834]

I have a question, why did you just clean the suction line? Thank you.

[@shellz5437]

because the old unit is r22 and the new unit is r410 A and they are reusing the lineset so they had to clean it because you cant mix 410A with R22

[@MrYouaintright]

How is the new unit being held up in the air like that?

[@QualityHVACR]

It comes with a wall bracket.

[@JesseDoesHVAC]

Aerosol pipe cleaners work just as well if not better IMO and no chance of getting the plugs stuck

[@devandoucette4782]

Regardless if it was designed to do so, you got some balls shooting stuff like that into the line set, especially ones that aren't exposed.

[@AllTattedUp13]

Huge ol nuts lol I'd be terrified that thing would get stuck somewhere on me. I'll stick with the liquid cleaner and some nitro.

[@colinrobson8861]

15th week of 1986. Always enjoy the videos!

[@Lucie_3v]

What is that leather kit you have on your waist

[@QualityHVACR]

taleofknives.com

[@warenmann1042]

@3:27 i could just imagine the Sheriff stopping him and saying "Where you going with A/C boy"...

[@AllTattedUp13]

I once had the parts delivery guy drop my equipment off a block away. So me and my helper just walked over with hand carts. And I said the same thing..sure hope a cop don't roll up 😂😂

[@lilalex4194]

Awesome video per usual but where Trevor been at ?

[@QualityHVACR]

No longer works with me.

[@Subcooledsuperheat]

What was the range plug for?

[@aaronburke2469]

Plug in the air handler would be my guess. 🤔.

[@QualityHVACR]

High volt whip for the air handler

[@ryanscho9207]

what is the chances that plug gets stuck inside the line?

[@joeshearer1247]

Blow it back the other way

[@QualityHVACR]

The way I see it, if it gets stuck that tells you you have a problem with the line set.

[@jdms1eeper]

Have you had any issues with the RLS fittings? Watching y’all use them is making me want to get the Milwaukee kit. Do you ever need to get the torches out anymore? Would you use it on coil replacement or other service repair?

[@QualityHVACR]

No issues. I love pressing, but it doesn’t replace brazing. Both are needed.

[@jdms1eeper]

@@QualityHVACR I ended up purchasing the Milwaukee m18 with Streamline ACR jaws. First job I planned on using it for (air temp condenser ) didn’t allow enough space. Haha brazing will always be a great backup, I’m just preparing for the new refrigerant and possibly flame free methods that might be required. Keep putting out great content, thanks for the reply 🤘💪

[@JMHVAC502]

15th week of 1986.. The first 2 numbers are the week and the next 2 are the year

[@james98852]

Lol i just finished a long day's work doing exactly this then i get home and watch someone else do it.

[@rbarrett8460]

It’s a 1986 model according to Carriers warranty app

[@AmericanFarmerHVAC2024]

The perfect message to start 2024 off.

[@BrunoFerreira-sf6gr]

Thanks for video...music..🤷‍♂️...???

[@warenmann1042]

@ 2:22 I always thought Trane was an American Standard, a standard we could all live by...

[@allaboutechnologie2165]

Amazing job !

[@QualityHVACR]

Thank you!

[@joecoolusa]

This Carrier air conditioner year of manufacture January 1986 (Pennsylvania)

[@hunterhill1013]

Real men unload the condenser all by themselves ❤😂

[@TheSimba86]

you're not a real man unless you're on your second set of knees and on your 3rd back surgery

[@hunterhill1013]

@@TheSimba86 these damn millenials just dont understand that! Bunch of soft hand baby boys 🤣🤣🤣 P.s. Im a 29 yo millenial

[@cman3680]

I wonder how these tampon boys lift the FAU into attics now days

[@realmadrid5981]

Tommy gate for the win

[@QualityHVACR]

Haha! It’s all about technique.

[@MrElemonator]

If the owner owns a EV charge them more ⚡️👍🏻

[@jakeholcombe4002]

96 the digits before the letter in the carrier serial determines age

[@dylans3786]

The new system won’t last 1/4 as long

[@SJJtech]

3rd and 4th number is the year. 86

[@DavidHernandez-gt9bo]

Nice ! It looks like you got new help ?

[@QualityHVACR]

They are a sub for changeouts

[@justincat874]

1986 is the age of the indoor unit… in 1984 American standard companies acquired Trane. What was the mistake?

[@flopeki]

My same question. Probably using the plug and firing too soon.

[@ClimateForceHVAC713]

1:17 15th week of 1986

[@everythinghvac6826]

He had a desk pop😂

[@diyhvacguy]

😂😂😂😂

[@QualityHVACR]

Haha!

[@mordeth999]

Noooooo!!! That stove plug!!!!!!!! Please never do that again. Bro I work in your area and see those things all over town and have to deal with the consequences.

[@Uncajondesonrisas]

9:08 i laugh here

[@markcotter2355]

86 bro

[@melvinwillingham233]

1986 the third and fourth digits are the year

[@kurtiscring1550]

Ok is that plug gonna make several 90 degree turns ?

[@GannDolph]

Apparently yes. There's a good trade show demo video on HVACschool channel i think. The plug (aka 'pig') is not relying on its initial momentum but rather it has all that nitrogen pressure backing it up all the way thru. Kind of like a bullet still in the barrel of a rifle.

[@QualityHVACR]

With ease.

[@JMHVAC502]

Are those guys your full time employees or did you sub it out?

[@QualityHVACR]

Sub

[@josephmartin7144]

You have guts that work for you or are these subs in ur vids curious been around a while and just like seeing the business scale

[@ajaybhandari1718]

I think week 15 of 86

[@serialseatsniffer5610]

i now see even hvac channels have now resorted to click-bait titles.... 🤦🤦

[@JoshWells-h8t]

The first 4 tell you that 15th week of 1986

[@MeaconHeatingCooling]

its 86 model

[@JesseDoesHVAC]

Here i am watching a video expecting to you make an actual mistake and to learn from it…

[@MrCmgl1]

It’s from the 15th week of 1986

[@lnesmith3]

January 86

[@smith-mundtnews1406]

Run Tru condenser. Nice!

[@TedCookHVAC]

Looks like 1986.

[@johnmillan7316]

I think is 2015 because you use the first serial number

[@topher8634]

15th week of 1986

[@bernieclement3373]

15th week of 1986 18000 btu

[@airteamhvac1]

Definitely 86

[@tphvac87]

It’s an ‘86

[@Seedavis397]

Where’s the mistake?

[@topher8634]

Turning the nitrogen on b4 he had the hose connected to the line.

[@Seedavis397]

@@topher8634 hmm. Not that big of a deal but whatever I guess lol

[@Seedavis397]

@@topher8634 at least he didn’t lose the little pig somewhere inside lineset. That would be a doosey

[@topher8634]

I'm assuming that was the mistake anyway. It was the only time I heard him say "whoops"

[@fritzjean-baptiste1988]

From 1986 38 years old

[@richardvisco6370]

1986 model

[@bonexsher]

86

[@ryangoold1570]

15th week on 1986

[@Killerbuckets23]

This specific carrier air handler says 1586 which means January 5, 1986

[@ThomasWalker-m2y]

Why are you standing/ working in the Road.???

[@mariowilson5663]

1986

[@kurtiscring1550]

Ummm organize your truck on Saturday bud

[@lunativ1024]

I hope this is a joke

[@kurtiscring1550]

@@lunativ1024 half joke. Organize your truck during offduty hours

[@malcolmwhite821]

Sure. You do work on the clock. When off the clock you live your life. It called work/life balance. I take it you are non Union?

[@QualityHVACR]

No thx

[@kurtiscring1550]

@@malcolmwhite821 extremely non-union aka not-a-communist 😁 I worked more 100 days in a row this summer and last summer and most of those are 12 hours days. And I couldn’t be happier.

[@kurtiscring1550]

1996 is not very old

[@jeanphil-tamere481]

Yes it is

[@tonyowens6622]

15 th week of 1986

[@KMR6666]

To many ads

[@MeaconHeatingCooling]

its 86 model

[@38mullet]

86

[@markrizzo2283]

15th week of 1986

[@jwsocal73]

1986

[@IslandbreezeMechanical]

86

[@kennywest3950]

15th week of 1986

[@spymoocowgaming]

1986

[@CraigAdams-h3n]

1986

[@chuckrusso2131]

1986