Wiring Two Subwoofers DVC 4 Ohm - 1 Ohm Parallel vs 4 Ohm Series Wiring

[@tobybigham4196]

5 Years old, and still relevant. Thanks for the references. This will help my design greatly!

[@anythingusefultv1482]

Been looking for a tutorial everywhere and this is the exact video i needed. You answered my questions stucked in my mind over the past years. Thank you

[@Qualitymobilevideo]

Glad I could help!

[@ICP1SBJ]

I learned this stuff back in the 90's. I had 4 15" Rockford Fosgate subs and I ran them Parallel/Series to get a 4 ohm load on the 4 subs. While my amps could run at 1 ohm the subs couldn't take the power as I was running 1400 wat at a 4 ohm load. I wish youtube was around back then cause I would've learned all this so much faster than reading it from books. Great video!

[@Qualitymobilevideo]

Thanks John!

[@dirtyboy8336]

Thank u for your info because I'm just learning how to work on my own Audio in car No one I know want help me so I come to KZbin So Thank you so much John.

[@mindciller]

Exactly.! And the circuit city or goodguys had sharks looking for commission so they had no knowledge except for the price

[@David-p1h2q]

​@@dirtyboy8336my friend was my car audio tech,he wouldnt let me touch anything except for the volume knob lol .Unfortunately he was killed riding his motorcycle at high speed and hit a utility pole.i been crying everday for nearly the past 2 years since he died.35yrs of friendship gone because his girlfriend pissed him off and he jumped on his gsxr750 to let out his frustrations,no more frustrations for him RIP BRO

[@martinantonioperez489]

No hablo Inglés pero solo con ver las conecciones pude aprender a subir y bajar los ohms, buen video mi amigaso

[@edwinlara7426]

Entiendo este video . En español nada . Jajaja

[@blackcaesar8327]

I really want to thank you guys for taking out the time to actually break down and show what to do I appreciate y'all

[@Qualitymobilevideo]

Thanks Lewis! We do it for all you who are new to this!

[@evanwise6424]

Amazing video. Used your diagram to wire up my 2 audiobahn 12s to a 1500w monoblock. And it read 3.4ohms. Very happy with the result, mind you this is the first time I have ever wired up subs myself and I’m 16. Btw I liked and subscribed🤟🏻

[@Qualitymobilevideo]

Heck yea Evan! Glad it helped!

[@chadjay828]

Good to see another young blood getting into automotive sound systems there is a whole lot to learn but can definitely make some big time $$$$ keep it up young blood

[@DEMONJOKER69]

I wired my subs to 1 ohm today from this video and it feels like it got twice as loud. I don’t know what it was wired to but it had a positive to a negative on both subs idk. Thanks for the easy easy easy guide on how to do this!!!!! Never mind I guess it was a 4 ohm load haha

[@peterrasmussen68]

4 Ohm sounds the best imo, 2 and 1 ohm are for spl ratings

[@nothim7394]

@@peterrasmussen68 no they’re not. It’s literally designed for the subs. Not for an SPL rating.

[@3MatthewWright3]

My sound quality went down but not by much, it’s hard to tell because there’s so much power now😂 Im never going back to 4 ohms

[@letsgoracing78]

I'm running my subs at .5 ohms lol 😆 granted my system is built for it and set for spl so there is that

[@oscarm8952]

My amp is 1500 watts, and i have 2 gravity sub 3000watts max 1500 RMS, i did the conection 1ohm and the amp stop (red light protection) what can i do?

[@darrenbaillie98]

The old school Pioneer Champion series subs are killer! The 10" 350 watts rms 1200 watts peek power subs are so loud and well built! As are the 12" series! Pioneer used to make solid loud refined subwoofers!

[@lowhertzhighspl]

3:20 and then wire each to it's own wire terminal cups and wire those cups directly to the amp. If your amp has dual terminals, they are the same channel so connecting to each terminal pair is exactly like twisting the two wires/speakers/channels together.. making it a parallel connection. This tip is for those who have an enclosure that has separate chambers and two separate wire terminal cups.. like I always have.

[@mmotobr6935]

lol i just wrote for help on exactly that issue. didnt want to drill hole thru the chambers for wire...but ,getting rid of a possible air leak from one of these terminal cups will be a goal in my next encloser,thanks alot your input is wat i couldnt find in an actual video.im going to wire it up RIGHT NOW.IN MY TOYOTA SIENNA VAN LOL,BOOM DIDEBOOMBOOM

[@PuresDen]

Finally someone who clarifies this I have been wondering if I have a 1 ohm final load on amp wiring 2 2 ohm loads through separate chambers to the amp

[@dugy40]

I needed to read this. He didn’t explain.

[@VelociWyatt]

Im sorry i'm new to this but let me make sure I have this right... so I would wire posi to posi and neg to neg on one sub, then wire to the cup, and do the same for the other sub? (so I dont have to wire the connection to the other sub?) Then connecting both cups to the amp will make a parrellel connection for 1 ohm imp? I also have an enclosure with two separate chambers and would like to avoid drilling a hole in the middle. Thank you to anyone who can answer this for me

[@VelociWyatt]

Ok I think i might understand now but I'm still not entirely sure. I would wire each sub positive to positive and negative to negative and then to each cup. Then, from each cup outside the box, I would connect positive to positive and negative to negative and then wire that connection to the amp?

[@marvinavalos6384]

Now this is how you teach some one how to wire your sub unlike other they just rush in to it and try to get it out of the way smh..nice man..👏👏

[@Qualitymobilevideo]

Thanks bud! Lots more technical shit on the way

[@kanejackson7372]

That is ture

[@fabreezy7707]

Quality Mobile Video yeah but you missed something now how do you run it to the box ?

[@justingonzalez702]

Those 4 sets of wires that he twisted together to make one red and one black set, run those to your monoblock amp.

[@garygoodno2682]

@@Qualitymobilevideo 0

[@scrapironfish]

This is one of the best videos about wiring subs with dvc's. Thanks!

[@Qualitymobilevideo]

Glad it was helpful!

[@seanwaters5632]

Thanks for not over complicating it. Like 90 percent of the other videos.

[@Qualitymobilevideo]

You're welcome!

[@AugustusCardoso]

FINALLY I understand series vs. parallel wiring. Thank you!!

[@Qualitymobilevideo]

Yes!

[@Qualitymobilevideo]

Pretty simple right?

[@MemphisMojo15s]

@@Qualitymobilevideo question. Please respond. I have 3 settings on my amp. LPF dial from 30-250hz. I have a subsonic dial from 30-50. Then i have the gain. I only have a button to go from 0-6-12db. My question is, where should the LPF dial be set at, and same question for the subsonic dial? I have 2 Memphis PR 15's in a ported SPL box and the subs sound really good, but since I've done so much audio over the years and i got out of it for a few years, then back in it, I've lost my touch. Can you give me an idea? Thank you

[@OGmudbone865]

Rockville RXD-T2 is the best amp I've ever had. It's not very common, but it gets better numbers at 4 ohm load than a 2 ohm load. Williston tested, 1600W @ 4 ohms mono bridged.

[@outsidethaboxx2354]

I literally watched about 7 video's on KZbin an this is the only that answered me 100 thank you great video

[@Qualitymobilevideo]

Glad it helped bud!

[@rbm2515]

Same here, this video helped ne out alot!

[@bertosexy123]

Right?

[@alum1n1umkn1ght3]

Still confusing asf tho

[@JoseManuel-lj4dk]

Now it makes sense I was doing my sub wrong , thank you so much for this video it makes sense now..👍👍👍 new subscriber for sure...

[@drewsherk8185]

Awesome video, super easy to understand. Thanks👍

[@growthdevelopment7412]

Thanks alot was goin to pay someone $100 and did it myself only took 5min 💪🏿💯

[@Qualitymobilevideo]

No problem 👍

[@prettyricky411ify]

This is the video I needed. Thank you. You answered all my questions

[@hadbl12]

Very good demo... one of the best

[@Qualitymobilevideo]

Thanks!

[@slumpgxd3280]

This is the first time doing it myself and this helped a lot. 🙏🏻

[@Qualitymobilevideo]

Glad it helped!

[@pickledlettuce7925]

Exact video I needed thanks🎉🎉🎉

[@Qualitymobilevideo]

😎

[@scottsears2387]

I like your videos. You explain everything very well. Your good at what you do. All around your very smart and a great teacher. Thanks for the video. Great job bro

[@Qualitymobilevideo]

TY!

[@praneethkatepogu5304]

Very very very very thank you sir thanks for information 🙏 we want more videos from this channel sir

[@zentitaimaliepouvi5555]

Nice..so which set up sounds better and more bass please Cheers

[@dk9696]

Thank you so much for presenting this in such an easy to follow , step by step format.

[@Qualitymobilevideo]

👌

[@Jaydogg209]

5:21 so with the two wires left for the amp here, can those go into a mono bass amplifier?

[@Qualitymobilevideo]

Yes exactly.

[@brandonmcswain8861]

Man thanks so much for this video now my skar 15s are slamming hard af

[@brandenbaird4910]

You just made me 250 dollars i appreciate this video so much

[@chadjay828]

Thanks for this video you have now taught a blind guy how to wire his scar EVL 6.5 inch dual for Ohm subs to a one Ohm load I am hooking two are those subs up to a scar RP 350.1 monobloc class D amp

[@Qualitymobilevideo]

Glad it helped!

[@markprice2225]

Chad Jay. Skar sent a rep to my house. He brought the upgraded 350.1, i was having power issues with ohms and rms/peak power was pretty much the same. Proved this with a Kenwood excelon mono sub 600 watt. I used to power 3 w6's with it & a Phoenix gold 3 way Amp(really 4:1, could power 4 door speakers and a sub separately). Hopefully you're keeping up, I then trade the 3 JLs for jbl comp 15 in the biggest box I ever owned. I couldn't take the rattle or the box size anymore & JL cameoutwiththe W7 and I had to haveit, so then I sold the 15 with the custom box, and got a JL W7-12inch & it's absolutely ridiculously awesome beautiful breath taking insane ground pounding Mike Tyson Jab jab & then BOOM!! KNOCKOUT... Skar ended up comping(giving) me the 900.1 mono, wires, an Optima battery(just for the Amps & sub), & a Duracell power capacitor that looked like a giant AA battery. Call Skar or wherever you got it from & Bitch! That there is no difference rms/peak because there isn't, and u will get what you should have gotten the 1st TIME, an AMP capable of powering any sub or subs & u can wire it however you like & hear a difference 😉

[@TwinTurboLsx]

If you have a dual channel monoblock would you still need to bridge the speakers together in the box, or wouldn’t that happen anyways at the amp dual channel?

[@Qualitymobilevideo]

You can use the terminals on the amp to parallel the connections.

[@TwinTurboLsx]

@@Qualitymobilevideo that’s what I figured. Thank you for the clarification.

[@Qualitymobilevideo]

No problem!

[@thatoneauthor]

Absolutely new to this... Been watching tons of videos and my sole remaining question you just answered... What kind of wire do I use for the series connection, like you've done here in the second half of the video. Thank you. Thank you!

[@zechariahjoseph9356]

Thank

[@oscarm8952]

when the bass feels loudest? how many Ohm?

[@SherwinDavid-pe4ov]

1omh hot

[@jlibra144]

This great impormative and explanation.

[@Qualitymobilevideo]

Glad it was helpful!

[@juancolmenares2341]

good video u go straight to the point not to much talking thx brotha.

[@Qualitymobilevideo]

Thanks Juan

[@olveramelinda]

So I can jump them from the terminals as long as I wired them up for 1 ohm? Two dual 4 ohm two terminals each sub has its own side of the box.

[@Qualitymobilevideo]

Two DVC 4 ohm subwoofers will create a 1 ohm in parallel and 4 ohm in series

[@christopherrose4914]

great explanation. thank

[@sallyjones1982]

AMAZING VIDEO HAHA GOING TO LEARN HOW TO WIRE MY SUBS DURING QUARANTINE AS THE AUDIO INSTALL SHOPS ARE ALL CLOSED :)

[@Qualitymobilevideo]

You can do it!

[@bullyelfuerte]

love the content

[@Qualitymobilevideo]

👌

[@hermankangoo4744]

Thanks for making this so simple to understand .👍

[@Qualitymobilevideo]

Glad it was helpful!

[@lilnic804]

How would you go about wiring 2 4 ohm dvc subs for a final 4 ohm load if you have a Monoblock with dual outputs?

[@Qualitymobilevideo]

Series each woofer, run each woofer lead to the amp, that will parallel them for a four ohm load

[@saitsaatcigil9830]

Thank you, My friend. I am grateful for your help,

[@Qualitymobilevideo]

You're welcome!

[@wiseguy6140]

Just beautiful 👐

[@Hudsonlee1954]

Nice. Thanks

[@Qualitymobilevideo]

No problem 👍

[@angelmacias5887]

Gonna grab a set of P3 12s 4ohms I believe would a amp with 1 channel work good or is there better?

[@Qualitymobilevideo]

A monoblock will work just fine

[@onewheelup912]

Thank u so much now I’ll stop blowing fuses!

[@shaneclk9854]

Is there any difference in sound output?

[@Qualitymobilevideo]

1 ohm is much more powerful

[@waynewallis2292]

On the 4 ohm load at the end of the process if I have 2 channles on my mono 1200x1 class d amp can I use both channels instead of spinning my positives and negative’s from both speakers together or should I do that and just use one of the channels?

[@Qualitymobilevideo]

If it is a monoblock amp, that is a paralleled connection, so you can use both.

[@Just_Prob]

That lakey beat @1:18 took me by surprise

[@Antony6.2]

Do you have a video tutorial or know how to wire four subwoofers DVC 4ohm to a 1ohm load?

[@antreasantoniou9522]

hello sir thank you show this video explain how install subwoofer can ask if have 2 subwoofer 4 ohm dual coil can make 2 ohm for amplifiers

[@_NEW3RA_]

Ok, my question is........ wired down to 1 ohm. Amp rated at 1500 watts at 1 ohm. So, is that 750 watts going to each sub or 1500 watts going to each sub?

[@Qualitymobilevideo]

The amplifier is only capable of 1500 Watts. It cannot double in power. The 1500 watts will split to 750 each sub

[@aldrickmoore6908]

Ok I have 2 10" subwoofers and I'm putting the subs in it's own box...how would I wire them to the amp ?

[@Qualitymobilevideo]

That depends on what load the amp can accept and how much power you need.

[@shaanbrown7663]

Man thank you so much my ds18 6k would play for a few minutes and then start smoking so I knew something was wrong definitely but your video helped me a lot. Thank you

[@Qualitymobilevideo]

Glad it helped, hopefully you only dusted the epoxy on the coils and didn't bake them.

[@TheMelophobian_]

What if you have 2 speaker terminals? And how to connect them to the amp?

[@Qualitymobilevideo]

We made a video on that! Here it is: kzbin.info/www/bejne/nJCre2poqNFlnqM

[@charlesterrellii7592]

Yo. I've had a system before. But never knew all this. Got a new one. A lot smaller tho. My question is.... What's the difference between how you just wired those. Making it a 1ohm or 4 ohm. What's the difference between dual voice coil and other. I'll tell you what I got maybe you could tell me what you think. I got 2 8" kicker comp subs, they are 4 ohm dual voice coil. What ever that means.... And I also got a Rockford fosgate 500watt mono amp. Not sure but I know I can make em hit. I'm just not sure the best way to wire it up is. What do you think?

[@obsnathan9289]

would the 4 ohm load need another wire to the amp. or does those two parallel wires go directly to the amp without another wire added?

[@Slow_Gixxer]

Thank you

[@RandoManFPV]

Sonic electronics shows this exact setup but with a slightly different connection to the amp. Instead the amp feeds straight into one sub following the same wire pattern on that sub then to the other sub with again the same positive to positive and negative to negative connections as yours. I'm just curious if both outcomes are the same or if this makes any difference at all

[@lila333111]

Perfect example thank you

[@JarofMayonaise]

So it's impossible to wire 2 4 ohm DVC subs to a 2 ohm load on the amp?

[@terrychudson]

My question also! have you found any answers on this?

[@JarofMayonaise]

@@terrychudson I did not get the answer, however I'm pretty sure the answer is "you can't." I solved my problem by just buying 1 good 12" sub (4 ohm DVC) which ended up sounding twice as loud and hit twice as hard as the other two subs.

[@regularguyfixes3142]

I have a unique situation I can’t figure out. Jeep has a factory 4om 2 connector sub. I have a dual 12” speaker box that only has one input on the box so I assume the speakers are in parallel. So I don’t know how to take the 4 factory wires to input into the 2 wire connector on the speaker box. Any ideas?

[@clutchymaster151]

Sorry if its dumb but once i have each sub wired together to make it a 2ohm each sub do i need to connected the subs together if my amp has dual connection? I have a skar audio 1500 sorry amd thank you

[@1Bids93]

New to this can I wire a single terminal sub with a dual terminal sub both being 4ohm

[@luisperezrodriguez4007]

Can you do two 4 ohms kicker dvc to 2ohm load

[@RicheySynthetics]

Thanks for the awesome videos!! Could you tell me the best way to wire up two JL audio 12 TW3s DVC with a AudioControl LC 1.1500? I want it wired for 4ohms. That amp as you may know is a mono block but has two outputs for the speaker. So should you just use one output or both?

[@mikehileman9476]

It does not matter on the outputs. The 2 on the amp are the same. It becomes more convenient as the wire guage increases

[@jeffsimmons658]

In my boat, I have a JL audio M 600/1 mono class D 600 W amp for my two JL audio M3 series 10 inch subs. My question is, am I able to add two more identical JL, audio M3 series 10 inch subs to that amp? If so, should I wire them in series or in parallel? What gauge wire should I use? Thank you Jeff

[@akshaydwarku5477]

which is more powerful? the two ohm load or the fourth one?

[@benwoolhouse9533]

At 1:55 you said you were using small wire to demonstrate; what gauge speaker wire should you use for this exact setup? (Assuming both subs are capable of 500 RMS for a total of 1000RMS)

[@darrenbaillie98]

I just bought a old school 10" Pioneer Champion series subwoofer 350 watts rms 1200 watts peek! 1200 watts peek is unheard of In todays Pioneer subs!!!

[@jourvbodybuilding9499]

Is it acceptable to wire two DVC 4ohm subs in parallel to one terminal cup and then from that terminal cup to the 1 ohm stable amp?

[@James-id5xq]

Wondering the same thing. Can't find any videos

[@jourvbodybuilding9499]

@@James-id5xq I have been running that set up now for 5 months. Have not ran across one issue so far. Hope this helps.

[@jerseyde3536]

Are you able to add a amp to each voice coil separately....

[@Qualitymobilevideo]

If you want it’s sure but there are other things you have to do with that setup

[@watts3276]

i got the sa 12 classic 4 ohm. should i wire them to 4 ohm or 1 ohm?

[@coolfern37520]

How would you do this in a box? Would you drill a hole through the middle divider?

[@gerardohtx207]

Yes a small hole works

[@brianbarajas2948]

@@familyoviedo7193 yup you got it.

[@pillaydaryldeez3707]

Yes

[@rubensalas3026]

I have Rockford Fosgate P 12s I’m looking at this video I think I got it on how to make those into a four ohm load thank you guys

[@mmotobr6935]

aloha,from hawaii. i need alittle help please.i bought a BELVA ported empty encloser that has 2 terminal junctions not sure wat you call them lol. can you guide me to wire 2 skar SDR -12 D2 nom.power 600w / trans power 1200w ending in 1ohm to amp? im not sure how to wire the subs to the terminals on the back of box?then from terminals to amp.Thankyou for all your past help,thankyou for the time you put into these help videos...YOU AND utube channels are the best.

[@mmotobr6935]

MY AMP THAT ILL BE USING IS 3400 BOSS MONOBLOCK AMP

[@rafaelmercado5771]

This works for 2ohm subs ?

[@Qualitymobilevideo]

No but we have a video on that too.

[@Big.Bore.B]

I have a Kicker CompVR 12 4-ohm… what am would you suggest? Just an FYI, I want an amp I can run the single off of but also want to be able to run 2 at 1-ohm as well, without having to buy another amp. Thanks in advance! Oh yea single sub will be installed in a ported box in 2012 Ford Explorer.

[@armandomorenoromero8531]

I have a pioneer gmd8601 and pair of 12s pioneer TSA 3000D4 how can i conect it to 1oh?the amp has 2 Speaker conexions but it says its one?

[@Qualitymobilevideo]

Parallel all the coils for a one ohm load.

[@armandomorenoromero8531]

@@Qualitymobilevideo thank you

[@armandomorenoromero8531]

@@Qualitymobilevideoquick question?both speakers all parallel and the amp?it says its í exit but has 2 do i use both or just one?

[@jimmyvinoya]

question, what is the best wiring for DVC subwoofer 12" 400watts 4ohms to 8ohms amplier? thanks

[@ramonhernandez3812]

I'm new to this . What are the differences between the set ups? What will hit deeper ? And the advantages of both? Nice video btw

[@Qualitymobilevideo]

1 ohm load will always offer you the most potential power of a system. 4 ohm is more efficiency

[@ramonhernandez3812]

@@Qualitymobilevideo thank you for the answer . Great video and info

[@Contact_Info]

@@Qualitymobilevideo is 4ohm deeper or better sound?

[@patrickpeterman4890]

I know a lot more now after watching your great videos' I am a nubee at this and am attempting to install a 4 channel/full range digital amplifier to accommodate (2) 8" woofers in a sealed enclosure; WISH ME LUCK!! PATRICK.P

[@kabco99]

Trying to achieve 1 8ohm load with two dual voice coil subwoofers, so should I start with dual 2 ohm coils? Series to 4ohm on each? Is it even possible to achieve a total of 8ohm for a home receiver?

[@Qualitymobilevideo]

You must have two DVC 2 ohm woofers for an 8 ohm load. Wired in series yes.

[@texastrucks7204]

Please reply your very knowledgeable, I want to buy 2 audiopipe txxbd415" in a ported of course. They say they are 1400 rms so I'm thinking maybe a skar 3500.1d will push both even tho I wanted separate amps but the subs are 4ohm. Don't want any other subs except these. Can I still get separate amps and somehow wire my 4 ohm sub to 1 amp or do I have to have both subs on 1 amp to get 1ohm from 4? Also what size wore would you recommend from speakers to amp? Would a separate amp for each sub sounds better than 1 amp on 2 subs?

[@alcanbongani249]

Hi I would like to ask if you wire Two 4 dvc Parallel into 1ohm. Does rms changes?

[@MrTrusty36]

Would like to know how to connect 2 15in kickers comp to a 1000/1 jl audio amp what's the best way pls

[@Qualitymobilevideo]

Need a lot more specificity! Kicker has over two dozen versions/models of 15" subs. Which model do you have. DVC or SVC. 4 ohm or 2 ohm. Combined RMS of the woofers?

[@tomtomruru95]

hello good video my why are we only talking about double coil subwoofers? and single coil subwoofers? I have 3 jbl stage 1010 subwoofers in 4 ohms I want to make a connection to make 1 ohms on my 800.1 taramps which is 1 oh thank you for your answer..

[@raw8617]

So u have to connect the speakers together with in the box ? Or were those the leads to the amp, i have 2 kicker 12 comp r dual 4ohm and i want to go down to 1ohm but confused on do i connect the two subs with inside box?

[@shaefreeman2768]

Can i wire a single 12in sub dual coil in a series bc my amp is 4ohms an if i do it in parallel it will be 2ohm?

[@Qualitymobilevideo]

Yes, if your amp will support a 2 ohm load.

[@shaefreeman2768]

@@Qualitymobilevideo thank u

[@mad4u3703t2]

does the sound differ from a 2 ohm or 4 ohm load?

[@Qualitymobilevideo]

Ehhh yes and no. It all depends on the gear. The differences would be the ability to get more power/bass with 2 ohms depending on the type of subs and amp used, but 4 ohm will always be more efficient and run cooler

[@brianshuster4702]

So if my amp is a monoblock but has two channel inputs would that be the same as bridging down to 1 ohm if I ran each subwoofer to its own positive and negative input ?

[@1KIKDWALA315]

Hi I am from India and I really want to know how the 16 ohm wiring is done

[@streetlegl]

I’m putting two 8’s in the wife’s car and a cheap 200 watt two channel amp, how would suggest hooking this up? and thank you.

[@Qualitymobilevideo]

Need more info! Are they DVC or SVC? What's their combined RMS? What impedances is the amplifier stable at? Exact model numbers would be useful

[@streetlegl]

Quality Mobile Video like i said it’s just cheap stuff, the speakers are pyle power dvc and 400 rms each. the amp is a boss amp 200 watt 2 channel cxx152.

[@streetlegl]

Quality Mobile Video also i wired the speakers just like you did on the 1 ohm section but that only leaves me with one set of wires running to the amp to either put on the left or right speaker screws on the amp.

[@philipdeg1594]

Very informative and thanks.I am replacing two of four of my stock 4ohm speakers. Can I use two 3 ohms speakers (direct swap) effectively.

[@Flybodian]

so how do you wire the subs going in the box now lol

[@ShiznitDaShiz]

Question why would one speaker hit harder than the other one? Bandpass box but follow your video to the T. Idk what gives. I've already blew one sub. Any info please?

[@lowhertzhighspl]

QUESTION: An answer please?! Can I get 2 two ohm dvc subs to work with one 1 ohm amp that has two speaker outputs? If so how would I need to wire them? I don't see why not as long as the mono amp has dual outputs which it does considering I've already done this set-up for one 12" dvc 2 ohm sub, (but now want to add a second sub) so if wired correctly I'd think I can with two L7 12" dvc 2 ohm subs (connect at 1 ohm to one mono 1500.1 or 2000.1 Skar amp) THANKS IN ADVANCE!

[@johnnieniunimae3606]

Thanks alot. i already run my two pioneer 12" ts-w3003d4 600 rms (each) to my pioneer amp gm-d9601 mono 1200 rms @ 1 ohms. I want to add pioneer GM-D9604 amp to my setup because its 4 channels so that it runs my front and rear speakers. What do you think?

[@Qualitymobilevideo]

Perfect match!

[@austinej2785]

Nice video, how do I connect 2 sub with 2 dual ohms to 1 ohms load.

[@Qualitymobilevideo]

Not possible, two DVC 2 ohm woofers can only wire to 2 ohm or 8 ohm load

[@austinej2785]

@@Qualitymobilevideo thanks

[@austinej2785]

Hi, please do you know which subwoofer hit harder? 8 inch or 10 thanks.

[@Qualitymobilevideo]

If they're the exact same brand and model, the 12" generally will have higher RMS. But don't think of the power of subwoofers in terms of size. There are 10" subwoofers that have double the power of 12" subwoofers. All subwoofers are completely unique, focus on the RMS not the size

[@austinej2785]

@@Qualitymobilevideo hi, can you also connect to 2 ohms too.