Quick & Easy DIY video on how to install a Domin8r winch onto your 4WD

[@Eighty9Mike]

Hahah Jocko lookin like a young buck in this timeless classic

[@astol87]

What a young bloke!

[@MR-dv6ms]

Is that Jocko's son ?

[@theinfamoussixcylinder3945]

Hold up. Dude mounted winch with mounting bolts going forward and through the fairlead instead of going down through a winch plate? I've never seen that before.

[@addamkahsai2237]

Soooo Happy you guys opened a store in Canberra supa pumped 👌

[@4wdsupacentreAu]

Us too!

[@Espinal_424]

Where can we get the control box and wiring?

[@paulnornmilburnemerson]

Will winch bolt straight to arb commercial bull bar without a adapt plate🤔

[@4wdsupacentreAu]

If it’s a winch bar, then yes. if it’s not a winch bar then no - it’d need to be braced or fit a winch cradle. It depends more on the bar as these winches have the same standard bolt pattern as all others Cheers!

[@antocuares5022]

Gday mate installed mine yesterday and only spools out not pulling? The wiring looks as the way yours so what did I do wrong?

[@4wdsupacentreAu]

Double check the wiring - have you mixed up the earth wire (black wire direct from battery to earth terminal underneath the winch) and the black wire that goes from the control box to the black winch terminal ( next to red and yellow terminals)

[@antocuares5022]

Yeah same problem but the wiring connections are good so what else could it be I can hear a clicking sound only but not pulling

[@johnkeenan3988]

I know this was a while ago but did you get this sorted. Mine doing the same on install. Will feed out but not in. Wiring looks how it is in manual, worked for about 30 seconds than nothing.

[@antocuares5022]

@@johnkeenan3988 hi mate thanks for your comment here ended up taking it back they replaced it with a newer model and worked fine so I guess the unit was faulty

[@johnkeenan3988]

@antocuares5022 Thanks mate, will check wiring again and if doesn't work will contact them. Took a whole weekend to fit because I had to modify stuff to get it in, now have to pull it back out. 😒

[@charliewang9171]

What do I do if I don’t have a bull bar

[@Gowieee]

Buy one

[@blakefisher8195]

what bolts and nuts are used?

[@4wdsupacentreAu]

Hi Blake, So we use 3/8”UNC x 1-1/4” Dacromet coated bolts and spring washers that are provided with winch when you buy from us. cheers, Saleha

[@blake9358]

It's a rebadged RidgeRyder

[@andrewford80]

good to know

[@cloroxbleach9796]

What size inline fuse is used in on the cable

[@4wdsupacentreAu]

Hi There, The winch does not come with a fuse. You can install one however at full load the winch can draw ~430A and would need a fuse big enough to support this kind of current draw. For this reason most do not install a winch, but disconnect it from battery when not using for a period of time. Cheers Saleha

[@lukeagex]

I struggled with this question too. Winches don't need a fuse because they're designed to draw large amounts of current, so the internals can handle high amperage. The battery cable that comes with the winch should also be large enough to handle the current, meaning it won't catch fire. Like the other person says, most people install a "winch isolator switch" that sits between the winch's battery cable, and the car battery, so you can cut power to the winch when not in use to avoid battery drain.

[@NoLimitTouge]

What's that for a young guy? Does he even have a driving licence? 🤔 Jock's high-school video project 😁

[@user-teabager]

I would buy from them if They had Afterpay instead worrying about the zippay Watch how many people like this because you have made comments about zippay being your best customer

[@4wdsupacentreAu]

Hey mate, we have Afterpay available on our eBay site: www.ebaystores.com.au/4wd-Supacentre

[@user-teabager]

Thanks will buy

[@garrybeattie8265]

@@4wdsupacentreAu I was not aware of that either. I won't use Zip Pay, but I do have Afterpay and Openpay.

[@benni727]

​@4wdsupacentreAu hi can you buy wireless recivers separately. my winch controller works with the cable plugged in,won't work with wireless receiver plugged in and on wireless