Quick How To: Tesla Model 3 and Model Y Front Camera and Windshield Cleaning - Fix Blurry Hazy Video

[@wadethompson2084]

Excellent video. Instead of a spudger tool (which I didn't have), I used two plastic key cards. Your directions were perfect.

[@Jadeadian]

Can't thank you enough for posting this. The poor weather detected warnings were getting real old real fast.

[@knipdlo]

You’re welcome! Cleaning up that glass should help!

[@user-tk7lf3kr5c]

Legend! Thank you! Helping glass guys everywhere

[@kelsie4998]

Model 3 2019. Tesla was going to charge almost $1300. Thank you so much, you made it easy and understandable. Bless you 🙏 ♥️ 🙌

[@knipdlo]

@@kelsie4998 glad I could help!

[@joshrod88]

Thanks for the walkthrough. Just cleaned this on my model 3, hopefully getting less chaotic windshield wipers 😂

[@knipdlo]

It should help! Good luck!

[@bundy26]

Great video!

[@knipdlo]

Thanks @bundy26!

[@jimdog999]

Does this end up needing the cameras recalibrated?

[@knipdlo]

No, you’re only removing the dust cover under the camera assembly. If you do loosen or remove the camera assembly you would need to go into your car settings and run a calibration.

[@epcalderhead]

Thanks for making this video. Very helpful. Exact same mirror/camera hardware on my 2019 Model 3.

[@knipdlo]

@@epcalderhead you’re welcome! Glad it helped!

[@flynnaz]

Great video, I need to do this after I had my window tinted, the guy that did it left the glass in front of the camera a little dirty. I have a 2023 Model Y. What year is the one in this video?

[@knipdlo]

Thank you, this is a 2018 Model 3 but I believe it’s similar on a Model Y, the only difference is the mirror may not twist off, it has a bolt that retains it. This is a T20 Torx, and the recommended installation torque is 2.5 Nm or 1.8 ft-lbs.

[@N.I.C.K.]

Did you do yours? How difficult was it to clean?

[@kungfoochicken08]

Had the same thing happen to me. When they tint the window, the use water between the tint and the window to place the tint. When its in the right place, they push that water out with a squeegee. I ended up with water and condensation behind my camera after get my windshield tinted.

[@bbbbearrunnow]

Well done!

[@김영호-s2y]

It was a great help

[@billnipp2309]

If the glass gets foggy, do the camera lens do also? Ty.

[@dls4705]

That looks like a TR20 screwdriver, not TR10. Might want to add a correction. 😁

[@knipdlo]

The lower camera housing is a T10 for sure, you can see it at @3:59 Model Y owners will need to remove a single T20 that holds the mirror to the mount.

[@dls4705]

​@@knipdloYes, it's a T10 sorry. I just took mine apart and cleaned it. It seemed bigger for some reason

[@knipdlo]

@@dls4705 that’s ok! Shoot the video a like if it helped you!