Quick Look - 1992 Foxbody Mustang GT with Vortech Supercharged 363

[@bubbawubba2307]

That's the way a car is supposed to sound. No popping of the exhaust and a nice clean chop with a deep rumbling exhaust. Fox body mustangs have always sounded the best. Very clean basic build that works and puts the power down

[@Louielou50]

Ina world where it’s “coupe this coupe that” it’s refreshing to see a clean GT build

[@Dante-tt5bz]

that sound is so beautiful I don't think many other cars can have such beautiful sound

[@judahisrael9456]

Man I’ve been going back and forth for months on whether I wanted to do a coyote swap or a 363 build, and this setup is really the setup I’ve been looking for and it seems like you did it right … your car makes me real excited to do my 363 build and give me the hope for a sweet outcome .. Thanks for sharing !!

[@joeyDi8764]

Easily one of the nastiest fox bodies I've ever seen!💪🏼🏁💨💨

[@emilianozapata8972]

I love that wheels, sound 10/10 🔥

[@93notchback]

Thank you for keeping your tail lights true to the GT.

[@toddivey1032]

Nice GT. Slick paint. Grew up with them too. Have had 3. Rolling in a jewel green 92 lx "saleen clone". 80k mile car. Love my fox. Thanks for the content.

[@stevo196two9]

Man, those rims really set that car off. What a beauty.

[@roblinprasad528]

Beautiful car. Nicely put together. Simple n clean looking beast.

[@kelinjohnson7421]

So happy to see the 80s and 90s returning in the 2020s

[@richharris9489]

Hello yeah dude

[@CPMUNSEY]

Good lord that things clean!! Well done with this build.👌🏽🔥🔥Easily one of the cleanest Foxbody builds I’ve ever seen.

[@Pang-Wangling]

Appreciate it!!

[@93notchback]

Love that you retained the GT taillights.

[@Olds_Pwr]

For the technicality part of this Fox Platform, the so called 363's are actually 364 cubes. It rounds up like the 301 Ford did to 302 cubes. 301.5 and 363.5.

[@hennhamm5560]

Goddd this is beautiful and nice set up!!

[@mistersecret88]

I have an 89. I love that u kept ac. So many people deleted that for what? Half a tenth. Sweet

[@raultorres3595]

Thats one amazing machine 🙏💯🔥

[@darinlewis9478]

Beautiful car !! Nice job on the build and thanks for sharing with us

[@RogBeasly]

That’s one hell of a ride you got there ! 10/10 beautiful fox.

[@NotoriousGT350]

Awesome GT!!! Gotta love black when it shines!

[@cwhall5430]

A beaut of a beast you have there. 💪💪💪 I also have a '92 GT, metallic tuxedo black. My interior is a little different, all black from factory, nothing 2 toned. I replaced the front seat with a set of '07 Shelby GT500 black leather seats. I fabbed a front mounting bracket and lined everything up with the stock bolt holes.im running 18" Centerline "cruising concepts" line, all polished billets. 331 stroked, wish I had that long block setup similar to you, but that's why we're forever upgrading on our builds... anyway much respect for this black beast, looks and sounds great ##FordTuff ##StangBangOnEm #FoxbodyNation

[@bigbama34]

Looks and sounds awesome!

[@darrelltuttle8298]

One of the best fox body's I've ever seen.

[@OscarR-f1d]

Boss/Dart is the only way. I’m glad you didn’t slap heads and a striker on a stock block. Nice work!

[@StangCartel]

Im a simple man. I saw a foxbody on the thumbnail, I hit subscribe

[@Foxbodyderrick]

That car is wicked. Love it Keep the videos coming

[@hdhd7402]

The memories listening to this car. I had a V2-S trim with a ice system!!! I was hell on the streets. When they got tired of blowing up their DSS crate motor’s, they stole my car and chopped it 🆙 nice ride.

[@scryla2000]

One of the cleanest foxes out there!!

[@hornetracing1070]

Omg I’m in love I will be getting me a fox body next I can’t help myself I’ve loved these cars as a kid growing up in the 80s watching my dad race against them on street we always had Camaro or nova I got a 3rd gen now I gotta get me one beautiful car bro

[@SamM-qk9xo]

Beautiful fox. Amazing ❤

[@edwardthayer9386]

Very nice! 👑 love that you left the original taillights.

[@405montoya]

Nice grew up with mine, 19yrs later it’s waiting for a makeover. (1990 GT).

[@bobg3633]

Im a honda guy. But allways loves this mustang. This one is beautiful.

[@MrCaribe65]

I'm a car guy. I like this Mustang, and Hondas as well.

[@RealDougFields]

Honda Guy? C'Mon man.

[@bobg3633]

@RealDougFields if you dont know than you dont know...less than 10 grand i can have a 700 hp 1100lb musktang killer.

[@RealDougFields]

@@bobg3633 It will still be a POS Honda.

[@bobg3633]

@@RealDougFields typical duche bag

[@KASLCustoms]

Beautiful car sir!

[@wutusaying783]

Would love to see her Run, wut a beautiful car and build💯🤝

[@MrCaribe65]

Beautiful Fox.

[@doublerrated6735]

Sick buddy the Ford performance 363 is pushing 500 horse and almost 500 lb feet I loved it when you said basically stock.. gorgeous

[@Pang-Wangling]

Thanks - I think my mostly stock comment was about the longblock being basically the way I bought it. LOL

[@feminazislayer]

Clean, sweetest fox street car. Perfect build. Everything is exactly what i would do. The motor may be over my budget but if i had the coin yeah.

[@callmemrwes]

gorgeous car. i’m from the north shore area hope to see it one day

[@modcreations8226]

This vehicle is beautiful man!!!❤

[@michaelharwood3857]

Man those wheels are clean

[@Pang-Wangling]

@@michaelharwood3857 thanks

[@Cabernet_fox]

Wow now this is one beautiful fox ! I love it

[@jamalclark7379]

Absolutely gorgeous car! Hope my 87’ turns out half as nice as yours!!!!

[@Pang-Wangling]

I hope so too!

[@jesusmunoz5184]

4 Lugs, SICK!!!

[@joshuastone3402]

Sounds sooo good! Nice mustang!!

[@Joeshomegarage]

Beautiful car man!

[@Metlupass2]

Awesome clean build.

[@FranciscoEsparza-pn6io]

Amazing looking car I love that sound and the motor wow I'm sold ❤❤❤❤❤❤❤

[@alpineguy1978]

Sounds amazing !

[@Mmagz6]

Holy Hannah! Sounds mean. Very nicely done!

[@Foxbodychuck386]

Beautiful car

[@ILYMAD66]

Oh my goodness! So nice!

[@headgames]

that thing is beautiful!

[@jsturgeon288]

Beautiful build

[@phillipyau4234]

Hi that's awesome fox body nice 😀 👍 😊❤

[@pimpovic2]

Very nice car brother, I love the Tuxedo black. Very clean. There's a video that Holdener did and he discusses the Z heads. They flow about 275cfm up top if I remember correctly. Not terrible just a little less the AFR and 11r heads.

[@Pang-Wangling]

I'm not sure I've seen it, or I just don't remember. I've seen a bit of information on the original Z head but less about the Z2 head which I have. There is the basic Ford published information which agrees with those flow numbers. I just don't see much of anything out there where anyone has really pushed them, or ported them.

[@strangedemon]

Do like this car a lot. Sweet that you put a YSi on it

[@AADmrstangerbanger]

I would get a set of Trickflow valve covers or take and weld some AN nipples on yours and put a motion raceworks breather on the setup. I have similar setup and with that much boost that poor breather might start letting oil get on the motor. The setup they sell is top notch and No more problems with boost for me. Also, intake temps are a huge problem for me in my area so Meth injection works on WOT but put an intercooler on that car and watch it change into another animal 24/7 unless he weather doesn't get that hot in your area but here at 105 my car would pull so much timing because the votech was just throwing hot air right into my systemax intake lol love the car. My new build I went gen3 coyote with a 10r80 and soon all go gen5 whipple and it transforms the foxbody into another car. Idles perfect no more surging or problems its just like a new mustang but a foxbody and with the 10r80 its rips with just bolt ons and lund tune.

[@Project_Valkyrie]

Wow, thats a beautiful Gt, tastefully modified. 🤙👍

[@dagodigs]

I just bought a rough 88 GT 5.0😅 I got some work to do

[@wesco123]

Masterpiece 🏁🏁

[@BrandonKnight-il9xs]

That is freaking awsome

[@JohnDOEgarage]

Awesome build. Sounds mean!

[@98saleen]

Nice car! I've had to fix other blower cars with that same belt issue riding over the compressor. You need to ensure the tensioner is not shimmed (washer or anything behind it). If it is mounted flat, then it is your pulley slightly forward and keeping it out of alignment. Note that under load, the crank can walk/push forward slightly which could be when your belt jumps 1 rib over the compressor, but at idle it is aligned normally. Just something to consider.

[@Pang-Wangling]

Thank you. Interesting, I do have it shimmed because that puts the pulley inline when it's static, not running. I'll have to check that again. It's been like this for about 4000 miles so I was suprised to see it happening.

[@98saleen]

@@Pang-Wangling Yep it can be the simply crank pushing it out of alignment after heavy-driving acceleration. Most times simply having the pulley back (towards) engine about 1/16 of an inch can make a big difference. You can play around with the shims you have and get a small one by using flat washers. I goto my local hardware store and get some flat washers of different thickness and trial-and-error swap them out for best results. Good luck! Love the car.

[@sublime929]

Sweet car, sounds absolutely mental. Just surprised you didn't paint the quarter window trim too.

[@Pang-Wangling]

I bought the car painted with these old worn out Quarter windows. I have a new set of the Scott Drake version waiting to be installed. I wish they had the Mustang logo on them but they are certainly better than what's on it now.

[@sublime929]

@@Pang-Wangling ah makes more sense now, sort of. Have to wonder why they didn't paint them.

[@pimpovic2]

​@@sublime929you NEVER paint quarter window trim. It should be black rubber and that's it.

[@sublime929]

@@pimpovic2 it's black, the car is black who cares. And guess what else, painting it it'll never fade and fall apart like not painting it. Lasts forever.

[@mitchellferre1652]

Very clean, sounds great ! 👍🏼

[@williejefferson9823]

Gorgeous ride

[@svegt]

Gorgeous Car love the build beautiful

[@Pang-Wangling]

Thanks!

[@htdriver2012]

This car looks sweet but sounds even sweeter.

[@dcastro0018]

Beautiful ride and setup. I'm curious about the injector setup you used. Did you use EV1 or EV6 (USCAR) injectors? Additionally, what size injectors did you install? I would greatly appreciate your feedback. Thanks.

[@Pang-Wangling]

Thanks. This car has EV1 Bosch 210's with a 10mm hat to make them the same size as stock injectors. www.cartermotorsportsllc.com/flow-matched-bosch-2102200-tall-ev1-injectors-8

[@BrotherTom]

You're in Illinois? Why have I not seen this car yet? Sounds great and that YSi was a nice addition!

[@Stona999]

Great car. Looks amazing

[@keep_it_low_bro]

I was 10 when that car came out, they were the loudest cars on the streets at that time.

[@dcastro0018]

Hey man, that Foxbody looks sick! I'm planning on doing something similar with mine. What fuel system are you using to support the 363 and the YSI? Also, what fuel pump are you running? Thanks!

[@Pang-Wangling]

Stock tank, UPR pickup, DW 650IL pump run with a BAP, -8 feed lines, filter etc. Works great.

[@ahhason]

Can we please see this thing rip?!?!!??!

[@lennoxWaptner]

Clean build🎉

[@bundcaas]

I want to see a fox Granada with mustang cobra underpinnings.

[@scottiewhitehorn5376]

Super sick build, you should try to make Ford takeover in Jackson Tennessee.

[@Stage2_392]

One clean fox plz get the Dyno video. Also Drag Strip Vlog.

[@arturozarate1752]

Hopefully its just the belt tensioner walking your belt off, but I've seen a few of the Ford 363's with premature worn thrust bearings from riding the clutch or extended street use in traffic. I can't say if it was the build or bearing more than the habits of the driver, but the Ford and Clevitte bearings I pulled out were worn to the point of over 0.100 of end play. Since the blower belt looks good though....maybe just a tensioner.

[@Pang-Wangling]

Thrust is good. I just had it apart over the winter.

[@arturozarate1752]

@@Pang-Wangling ok cool.

[@ZeusAmun-pt9dc]

I love how the fat tires in the back look

[@BustedNut-]

SICK CAR BUD!👍

[@Pang-Wangling]

Thanks! 👍

[@NYHeeb]

Beautiful what wheels please?

[@vernondavis2207]

VERY curious as to injector size, axle size and brand, clutch set up and engine management system? Also, a car of that power with no interior gauges? And you may be on borrowed time with that Trans...But NICE ride!!!

[@robertknowles4911]

Very nice my friend

[@jojog8304]

super, super clean build. What fuel setup are you running? (folks: key to a smooth idle) 363 sure makes up for not having a PD blower. Have nearly the same setup in my '94 but using a 331 vs 363 & pushing 16# instead on the Ti: found Ti's scream above 14# and they run fine w/o an intercooler (loss of HP not much at all) Wet sanded Tuxedo black is definitely the way, though I went with BMW Carbon Black for a lil more blue hue

[@daviddixon3567]

An just for the record the lower rear bumper body an spoiler are the difference between a Gt. An cobras..

[@TeamJesus515]

Well done 🇺🇸

[@costasgeorgiou5015]

Thing is awesome bro but your front rotor is on the wrong side the slots need to fan out the one on the back is right but the front rotors are swapped out

[@Pang-Wangling]

I appreciate you looking out for me and the compliments on the car. The rotors are on correctly according to Baer. baer.com/site_images/Rotor%20Rotation.pdf

[@costasgeorgiou5015]

@@Pang-Wangling that is odd I been working on cars for 37 years and it goes the other way but then it brings me to another question are the rear baer and why are they goin the correct way in reference to the front. I will open that link when I fix the update I just got and messing with my browser lol. OK I was able to fix my browser I see that must be a new thing cause I look further into it and now it not just the slot lean to back of car it depends on how the cooling fins are in the rotor if there flat or leaned a direction and that is what matter now. Well we all don't know everything I was just tryin to help 👍🏾

[@fordtechlife]

It's beautiful #blackcarsmatter 🦊🔧🚗👊💪🇺🇸 sounds amazing

[@arturozarate1752]

That wheel is DOPE! Where can I get that front splitter?!?!?!

[@ChaseBond11]

Custom make one! They're not too hard and you can get just what you want.

[@arturozarate1752]

@@ChaseBond11 I'll look in to it

[@pimpovic2]

Makers Garage front splitter

[@chapmanmerchant]

the chance of you doing a burnout with those tires is Semi

[@TaylorPinkston]

Awesome car. Just needs lx tail lights

[@catchk9]

Nice build! I see the Illinois Plates. What area are you in......Im looking to get work done on my 90 convertible if you can suggest a shop or builder

[@Pang-Wangling]

What kind of work do you need done? I'm in Chicagoland.

[@catchk9]

@@Pang-Wangling I need subframe connectors welded in

[@MrMach1]

Nice car!

[@NYHeeb]

With that much boost u running intercooler and assuming different pulley?? So cool enjoy

[@Pang-Wangling]

No intercooler 😮

[@chapmanmerchant]

Make it what you want!!!!

[@judahisrael9456]

Is there anyway I could get in contact with you, I have a few questions about your build

[@Pang-Wangling]

Feel free to ask here. I try to answer questions for everyone.

[@lawerancelanham]

I'm curious. Do you know where this car is originally from? I had a 92 GT too, black on black. Yeah... I miss it 😢

[@Pang-Wangling]

Michigan but it had grey interior.

[@daviddixon3567]

An the front grill insert are the difference between a gt. An cobra