Quick 'n' Easy install #1: straightening the refrigerant line stubs on the indoor unit.

The line set on the Quick 'n' Easy must go through a right-hand hole, so it needs to be straightened out. Here's how to do it without crimping it. The idea is to slowly make your desired shape. Copper lines can't be folded into tight 90-degree shapes, so shape them slowly toward your desired direction. Think of them as train tracks with slow bends so the train doesn't jump the track, and the refrigerant doesn't pop out of a break from a kink. Airspool Quick 'n' Easy is a true DIY solar-powered mini split. #diysolar #solarheatpump #diy #minisplit
Get it here: shop.airspool.com/products/ai...
Learn more about solar hybrid air conditioning here: airspool.com/

[@MikeStrine_RoatanStrineWay]

Can the hole (for going through the wall to the outside) be offset to the right of the inside unit? There appears to be a 'punch-out' or scored area on the right end of the unit on Page 8 of the installation instructions. I want to mount it above a window, but to avoid the header, and studs in the wall, can bring it out about 10" - 11" outside of the unit, before taking the 90* bend to go through the wall? We have a 2"x4" wood wall construction, so I believe from the bend behind the unit, about 12-13" to the right, then bending outside 5", then downward. Will the Quick 'n' Easy line pigtail be enough to get it outside to connect? Thank You - (getting ready to order ~ save me one!).

[@airspool]

Hi Mike, yes, you can punch out to the right, no problem. Will do the final measurements to make sure that's also viable for the quick and easy, since normally that would go straight through the wall. Or we can customize the quick and easy to put the valves on the outdoor unit possibly if necessary. We'll discuss it.

[@MikeStrine_RoatanStrineWay]

How WIDE is the indoor unit? How far out from the center will the hole be required to go through the wall? Can the unit be installed above a 36" wide exterior door? Missing the Jack Studs and (2"x4") Header?

[@airspool]

Hi Mike, the indoor unit is 33.07 in wide. For some of these specifics, refer to airspool.com/install and check out some of the installation videos for the Airspool unit on KZbin.