Quick NUX Loop Core Tutorial With Footswitch

[@levih.2158]

Manual Loop Core: www.zikinf.com/manuels/nux-loop-core-manuel-utilisateur-en-65010.pdf www.dropbox.com/s/fo4tribyys4sg64/NUX%20Loop%20Core%20User%20Manual.pdf?dl=0 Manual Footswitch (Nux NMP-2 footswitch): www.dropbox.com/s/5nvhvuvrydwrb9f/NUX%20NMP-2%20Dual%20Footswitch%20User%20Manual.pdf?dl=0

[@loganoneill8671]

Seriously the best tutorial on this pedal. No BS, no long intro, just straight to the point information. Awesome job!

[@supjay3945]

Agree

[@LucianoVeryNiceHi]

took a moment wanting to literally leave the same comment!

[@smugas]

Short but very best "Loop Core" tutorial ever. I was looking for instructions about using nmp-2 to controll it 👍 (stereo cable from A&B to 'CTRL IN', click A - next bank, double clik A - prev bank, clik B - stop, hold B - clear. From 'delux' version I miss 24bit and better percusion tracks. Recently I disasembled my loop core to clean it after small water leakage. Inside is microSD socket with Kingston 8GB card. I forgot to check what is on it in raw mode as I was in rush to clean board, and it worked. Thanks for this tutorial 😎

[@dome9423]

Loop core deluxe can do this?How to set up? Pls help me.Thank you very much.

[@Planetewakeboard]

The best tutorial for nux loop core with Nux dual switch... Thank you!

[@dioclau14]

The best tutorial on this pedal, thank you very much!

[@FreddyJ120]

Great straightforward demo. Thank you! Wasn’t sure the footswitch was compatible with this model, so that’s a bonus piece of info for me. 👏🏻👏🏻👏🏻🤘🏻

[@ShaighJosephson]

This version outputs in stereo...but they changed it to mono to amp and mixer in the Deluxe version...which makes this version much more desirable...

[@kostaskantounis7479]

Is the NMP-2 footswitch passive? I mean, can it work (change presets) without being connected to power supply? Thanks!

[@levih.2158]

It is passive in the sense that the electrical connections that are made/unmade in the pedal by pressing the buttons can by registered by the LoopCore. It is not passive in the sense that it doesn't get any power to run anything from the Loop Core - so fx. the diodes only light up on the NMP-2 when power is connected. I've done some testing (with the setup from the video with a stereo cable in B&A input), and when not connected to power I can still change presets perfectly fine, but the B-button doesn't really work: I can't use it to stop the playback and I can't use it to tap tempo. Whenever I press B, it executes the CLEAR function, so a short press without power is interpreted as a long press with power.

[@iyiolaifemiposi603]

Best tutorial honestly, God bless you.

[@tozguitar]

Is there any way of changing the tempo without using the tap? Ie if i wanted to increase the tempo by 5 bpm it would be very awkward to do that ising the tap.

[@levih.2158]

I totally agree. Unfortunately I don't think there is such an option. I've looked in the manual, and it doesn't say anything about such a function - not that I can find anyway.

[@scarygroover]

Mine is stuck in SC mode and won’t pass audio. Have not found a fix

[@levih.2158]

Have you tried the following?: 1. Disconnect power, remove battery and disconnect any other cables. 2. Press and hold the pedal while plugging in power (until 'rd' or 'rP' shows). 3. Do normal formatting (hold up+down -> 'Fo' shows -> press pedal and wait)

[@scarygroover]

@@levih.2158 yes I have . To no avail

[@levih.2158]

@@scarygroover Alright well that's as far as my technical knowledge goes in this case. I'm afraid the only other thing I can do is recommend contacting either nux themselves (maybe from here www.nuxefx.com/company.html ) or a music shop like maybe Thomann. I hope you find a solution!

[@RedeyeRaccoon]

Great review, hope you can answer this, Im a year late. I've read everything, your comments, replies, the manual. My question is the tap tempo. I want to record a rhythm track live with a drummer. After I save it and start playing along I'd like to be able to tap the tempo as the song is playing, in case the drummer looses his spot? So, not setting the tempo before a saved file but during. I'm assuming no but if you could be so kind to try it out? I'll keep looking for answers, I'm almost sold.

[@levih.2158]

Thank you :) I don't have time to go too much into this, and I'm not sure I understand excactly what you want to do. But as far as I can figure out, you can record a loop (with or without rhythm track), save it, and then when you play it back you can tap-change the tempo with the B button - but only until you make new dubs. So you can only change tempo on a memory slot with no active, unsaved loops.

[@UncleAL2006]

This looper would be perfect except for one thing: it has no indicator as to where in the loop you are. The Legato has those red looping LEDs to show you and I find that incredibly helpful.

[@melaniegalarza3393]

Hello, I have a little question. How do I repeat my loop as much as I want? Without her stopping. Thanks

[@levih.2158]

I'm not sure I understand the question. Can you maybe elaborate a bit?

[@leandropeixoto8038]

I cant go up and down among banks.... Is ot necessary to connect a STEREO CABLE to do it ?

[@levih.2158]

If you are referring to changing of the memory slot with the NMP-2 footswitch, then yes, what type of cable used (mono/stereo) makes a difference. Try traking a look at the manual under "Product Description -> 8. Mode Switch" (I have linked to it in the description and pinned comment). Maybe you can make something work by changing the "mode switch", which is mentioned there. Otherwise you will need to use a stereo cable.

[@hansjongenburger]

Just found out it's a TRS cable you need which is different to a stereo cable

[@leandropeixoto8038]

@@hansjongenburger thank you!

[@hansjongenburger]

@@leandropeixoto8038 just tried it but if you have the loop core deluxe you can only set it up to do A to move up and B to move down, set it to close and have it unpowered

[@juanmanueldiezvalencia3517]

Colegas, ¿Para que sirve el pedal auxiliar?

[@levih.2158]

El pedal NMP-2 permite operar el LoopCore pisando fuerte el NMP-2 en lugar de presionar los botones pequeños del LoopCore. Esto significa que puede operar el LoopCore con el pie mientras toca con ambas manos simultáneamente. (He usado el traductor de Google)

[@dimavak]

V. useful video! I have a problem tho, when overdubbing, can the base loop be extended? For instance when I do an overdub on a 60s loop, the loop repeats after 60s with the overdub recording and starts a new overdub instead of repeating the main loop and continuing the recording of the initial overdub recording, i.e. I want the 60s loop to continue for few minutes whilst I record an overdub to create a new 3 minute loop for instance. Any ideas?

[@levih.2158]

I don't think it's possible - with this pedal - to make the pedal "do the work" the way you're describing it. But maybe you can accomplish the same thing by making the first loop the length that you want the second loop to be, and repeat the "underlying loop" yourself. So instead of making this kind of loop on the pedal: ||: C | Am | F | G :|| ... you make this kind of loop: ||: C | Am | F | G | | C | Am | F | G | | C | Am | F | G | | C | Am | F | G :|| And then when you start overdubbing, the overdub length will be 16 bars instead of four bars (in this instance), while the underlying "loop" is only four bars. So for your example, it would mean making a 3min recording, where you yourself repeat the 60s loop. With patience and the metronome, I don't think it's unfeasible. If you don't want to repeat the loops yourself, I think you need to either: 1) Find another loop pedal (I don't know about any unfortunately), 2) Use a computer to control the audio somehow (fx with garageband), or 3) Buy another Loop Core, and have the second Loop Core record the first Loop Cores loop however many times you want it repeated.. Does that help?

[@dimavak]

@@levih.2158 Thanks Levi, that's helpful but not the answer I wanted :( I get that I could do 16 bars myself but what if I dont have an idea of the length, I might want to repeat 2 or 3 chords once and decide on the total length as I'm playing. Can you play one loop on one channel and record a new loop on another channel? I know of loopers that extend the loop and this fact may have changed my choice on this one although I do really like it esp. for what you get for the price.

[@levih.2158]

@@dimavak I'm not quite sure what you mean by channels here, but I just don't think it's possible with the Loop Core unfortunately. I'm not an expert though, so if you want to be certain sure, I'd recommend contacting either nux themselves (maybe from here www.nuxefx.com/company.html ) or a music shop like maybe Thomann. You mention the price, and I think that's just the thing with this pedal: it's cheap, but that also means that it just doesn't have the same level of functionality that more expensive pedals can have.

[@VladoBelo]

Hi, please, I need advice. Could Nux be used in this combination even as a player of imported wav files? As a backing track player for a father - saxophonist ... On a One Man show? How long would the files fit in each memory slot? Example of a 4 minute wava and how many songs in total would Nux handle in total? Control only start - stop - switch to the next song .. Thank you for the advice :-D I also thought about the Deluxe version, but Core Yellow also has an Aux In input .. It could also be useful for recording eg keys ... Another question, would the Deluxe version handle better the function of only the saved wav player? Memory, sound quality, better switching between songs? Thank you for advice :-D

[@levih.2158]

I have a link to the manuals in the video description. The following is based on that and my own experience: You can import a wav-file on every memory slot (so up to 99 wav-files). My guess is, that a wav file counts as the "first recording", so if you import 99 wav-files, there is no slot left to make recordings without dubbing on a wav-file. The manual doesn't say anything about wav-file length, but my guess is that it follows the same rule as recording length: 6 hours total. So if you put a 6 hours long wav track on slot 1, there is no more space for other tracks. And there is space for 3m36s pr. song if all slots are used. (If each track is 4m there is room for 90 tracks). If you only use the Loop Core (without the NMP-2 footswitch), you can start (single press) and stop (double press) on the pedal. But changing memory slot you have to press the small up/down buttons. If you also use the footswitch, you can do the same, but additionally stop by pressing (B) on the footswitch, and changing memory slots on the footswitch with (A) (press/double press). I don't really know about the delux version. I think you can do all the same things though. Someone else commented that the delux version outputs in mono, and the regular version outputs in stereo. I don't know about any other differences. If you want to record keys, the simplest way is to use the regular "In" input as you would with a guitar. Although it would be in mono then, I think. So maybe aux is the only way to input stereo, but I think it's not as simple, and for a one man band I don't think stereo is very important. Also maybe for a one man band with backing tracks it's easier and cheaper to use a phone/ipad/computer as playback device for the backing tracks.

[@VladoBelo]

@@levih.2158 Thank you for the quick reply. Could it not be possible to record keys via In guitar input due to different impedance, or would this input take over without problems? The only thing that stuck in my decision-making is the above-standard Aux IN option in the Y version. And in the Delux version, it scores 24 bits again. I don't know how it would turn out when playing imported wav .. Maybe the sound would be ok. 24 bit is a lot to hear only on drums in Nux .. You wouldn't care. For the Deluxe version, the manufacturer writes 8 hours of recording. 24 bit files take up more memory.. My father would use the device one of them over a small clean combo ... or over a small PA .. Now make the right decision :-D Mono doesn't mind at all. Thank you very much for your time and willingness to advise. I wish you a Merry Christmas. PS .. a note to the above recommendation to use a PC or mobile phone as a player, yes this is a solution, but the looper could also be used for occasional playing with loops .. in addition to playing tracks as an accompaniment for one player .. so maybe I guitar, short loop and father saxophone, for family fun at home, jam :-D

[@levih.2158]

​@@VladoBelo I've never experienced impedans as an issue. In my experience, you can plug a keyboard in anywhere you can plug a guitar in: amps, mixers, interfaces, etc.. I don't know much about bit-rate. For a small amp/PA I don't imagine it will make much difference if you can choose one or the other. Merry christmas to you :)

[@VladoBelo]

@@levih.2158 Thnx :-D

[@loti3225]

Mine is stuck on stop modes and idk what to do

[@levih.2158]

Maybe try unplugging all cables including power, remove the battery, and then insert the battery again and plug everything in. Or else you could try a formatting / factory reset. Although you'll probably loose your recordings doing this. To do this, you: 1. Power on the loop core while pressing down the pedal until the display shows "rd" or "rP". 2. Press and hold UP or DOWN button for 2 sec until the display shows "Fo". 3. Press the pedal once again to confirm formatting. Or, press any other buttons other than the pedal to abandon formatting.

[@vmilic1]

Can i use this switch pedal for rec/play and stop? I think Stop with one press, NO double press!

[@levih.2158]

I think you can only use the LoopCore pedal itself for rec/play functionality. I don't think I understand your comment about Stop. You double-press the Loop Core to stop - one press would initiate recording mode. And you press once on the footswitch to stop.

[@vmilic1]

@@levih.2158 my english is maybe not good but i hope u will understand. I don’t need this Loper If i must press twice button If i want to stop all

[@levih.2158]

@@vmilic1 I've looked at the manual and done some testing, and you cannot stop the pedal with one press on the LoopCore. If you want to stop the playback with one press you have to use an extension pedal like the NMP-2 Likewise you cannot use an extension pedal to rec/play - only the LoopCore can initiate rec/play.

[@vmilic1]

@@levih.2158 ok. I want to by nux looper deluxe . IT comes with ext pedal. Then i can stop ALL with one press?

[@levih.2158]

@@vmilic1 I don't have the delux, so I can't tell you for sure, but I'm pretty sure that you will be able to stop it with one press on the B button on the footswitch with the delux version. I don't see why it would work differently than with my setup with a standard LoopCore + NMP-2.

[@expatluthierinthephilippin6441]

Just got the Loop Core Deluxe, my first loop pedal. Sounds crazy but during playback the pedal delays 2-3 seconds between playbacks. What could I be doing wrong?

[@levih.2158]

Perhaps the rhythm box is active and dictating the length of the loop?

[@AlexArcady]

Best explanations ever. Thank you, friend. Question: are those all functions for foot switch or there’s more? Thank you.

[@levih.2158]

Thank you :) I've put a list in the video description of all the functions that I know of, but didn't include in the video. There's also links to the manual, where you can check for yourself if I've missed some functions.

[@boabglen]

Does the nmp2 work with boss rc600 looper?

[@levih.2158]

I don't know, sorry

[@Millennial_Mike]

How do you set the control pedal up like this? Mine just does up and down ?

[@levih.2158]

The setup is described at 2:56. Maybe you are using a mono jack cable instead of a stereo?

[@Millennial_Mike]

@@levih.2158 I realised the issue. I had the loopcore deluxe. Loop core deluxe only allows trs function to step up (B) or down (A) presets. Or TS (mono) option of stop when A is pressed. I think this was a bad decision from NUX... the functionality here us much better! I've returned my Deluxe and ordered the standard loopcore with a dual footswitch.

[@levih.2158]

​@@Millennial_Mike Yeah that does sound like an odd decision. I'm glad you figured it out!

[@viataculeo]

@@Millennial_Mike hey! i'm having the same issues with the deluxe. can't figure out witch switch position should i use to navigate with one button and use the other one for stop. it also behave differently with or without the dc adapter in. can you explain me what shoud i do? thanx

[@hansjongenburger]

With a stereo cable and plugged into a/b with open I get stop on B and nothing on A, I want to be able to have A ands up and down phases

[@Krisisawake]

very useful. thank you.

[@smugas]

I dont own delux, but Im shure that it does, as it is sold as "nux loop core delux bundle": loop core delux and NMP-2 together

[@traileater]

Nice vid. Anyone who where the imported wav files go? Are they added to drum presets?

[@levih.2158]

They go in the memory slot corresponding to the name of the folder you put it in - and the name you give it (as I understand the manual). So you open fx. folder W045 on the computer, copy your wav file to the folder and name it "w045.wav" and then you can find it in memory slot number 45. I have a link to the manual in the description. Look under 4.1.

[@traileater]

@@levih.2158 thanks, i just ordered one, cant wait.

[@stakolachook2581]

Can you use the nmp-2 footswitch to activate Recording and overdubbing?

[@levih.2158]

I don't think so. The manual for the Loop Core says about the "Ctrl In" input that: "This is for connecting extensional pedals to *stop playback*, *clear a phrase*, *switching memories*, or *do TAP tempo*." So I don't think activation of recording and overdubbing is a programmed functionality.

[@stakolachook2581]

@@levih.2158 Ok Thanks!

[@mahone9322]

how can i auto record?

[@levih.2158]

It is described well in the manual, which I have linked to in the description and in the pinned comment. But shortly: 1. Press "Stop Mode" button 2s (until display starts blinking) 2. Switch between "Normal" and "Automatic" stop-mode by pressing the stop-mode button when the display blinks When in automatic recording you press the pedal to record, and instead of recording, it will wait until you start playing.

[@infogitaarles4007]

Is it possible to change the tempo during the recording by tapping?

[@levih.2158]

I've done some testing, and I don't think so. You can only change the tempo on a saved recording. As soon as you start overdubbing, you can't change the tempo until a new version of the recording is saved with the new overdubs. So fx.: 1. I choose an empty memory slot. 2. I set a tempo by tapping. 3. I start recording a line.

[@chrisheyes66]

I can't seem to find anywhere that sells the footswitch for the Loop Core in the UK - what alternatives would work? - Great tutorial - I gave up trying to use it before,but this video has got me going again - thanks

[@levih.2158]

The footswitch is called "Nux NMP-2 footswitch". Maybe you can buy it here?: www.thomann.de/gb/nux_nmp_2_footswitch.htm I'm not very knowledgeable about alternatives, I'm sorry to say. I was wondering myself about it though, and sent an email to the Thomann guitar department ([e-mail], I believe the email is). They suggested buying two Harley Benton switches (I don't remember exactly which type) and a split stereo jack cable, I think it was. I suggest sending them an email if you're interested in an alternative solution.

[@chrisheyes66]

@@levih.2158 Thank you for that link. I've ordered one from Thomann

[@levih.2158]

@@chrisheyes66 No problem :)

[@boimesa8190]

What is the other input/output on the footswitch?

[@levih.2158]

I don't know, but I'm waiting on answer from someone who might know. The owner's manual says this: "Jack A Connect the device being controlled with footswitch A here. Use a connection cable with 1/4'' (6.35mm) phone plugs at both ends. Jack B&A Connect devices equipped with TRS or TS 1/4'' (6.35mm) phone jacks here. Use a connection cable with stereo or mono 1/4'' (6.35mm) phone plugs at both ends." ... When connecting to jack B&A, do not plug any device into Jack A. This may result in damage and/or malfunction." You should be able to read the entire owner's manual here: v2sources.siiite.com//enclosure/sources/WDhxMmpgSotqjYeI/NUX%20NMP-2%20Dual%20Footswitch%20User%20Manual.pdf

[@levih.2158]

I've received following answer from the company that produce the pedal: "A is for mono cable connection while "A+B" is for stereo connection."

[@boimesa8190]

@@levih.2158 but there's no audio going through it so what would be the use...??

[@levih.2158]

@@boimesa8190 I've received the following from the guitar department from Thomann: "This just means that you could use this footswitch with two mono cables, as well as with one stereo cable. You just can decide which way is more comfortabe for you. These are no two chanels, it´s more two different switching functions." So (as far as I understand) the A input is only for the situation where (for some reason) you want to use two mono-cables to connect the pedal with. I'm not really sure why you would want to do that, but I guess there are situationes where that's a viable option. Does that help?

[@d_walsh]

Thanks

[@billylynes8187]

thankyou!!!!!!!!!

[@kevinhay3778]

A lot of buzzing!!!!

[@levih.2158]

It's not the pedal - just low production value. The sound is recorded with a pretty cheap microphone and I live right next to a street. I may even have had the window opened during recording.

[@PenSlaps]

Huge help ty