Wow thank you for this video!! I’ve always been a vinyl queen but have finally got my new set up, CDJ-2000 nxs with the DJM-750....have been struggling with the effects a lot, especially the delay and echo. I didn’t even know about settings the tempo for the effect. Would explain my struggles. This tutorial has literally changed my life! 😆
@djmadbwoy48065 ай бұрын
Wowww I needed this video 9 years ago
@derrickmartinez68547 жыл бұрын
I'm about 2 years late on this comment so I'm sure many of you watching know this, but I've also discovered that if you apply the delay level depth to about 1 o'clock, you can also use the up fader in the same motion as you would if you were doing a post-fader echo out. It would be an up down motion with the fader. It sounds pretty much identical. Seems like the post-fader also applies to the delay. However, I'm not sure if that's possible with the post-cross fader. Hope that made sense.
@samarthdora44906 жыл бұрын
Seen LAIDBACK LUKE do the delay effect trick
@conormorgan11829 жыл бұрын
Any chance you could do a video on mastering your recorded DJ mixes?
@Mojaxx9 жыл бұрын
I'll certainly add that to the ideas pot, thanks.
@JadoreAllan9 жыл бұрын
Yeah, I agree with Conor Morgan. Please do a video on mastering recorded mixes.
@conormorgan11829 жыл бұрын
MojaxxVDJ Thank you :)
@Mojaxx9 жыл бұрын
Conor Morgan It's in the works, schedule is pretty full at the moment. Hold tight.
@jemmanuellrt3 жыл бұрын
Thank you for all your superb teachings brother‼️👍🏿💯
@olegiezer2 жыл бұрын
That delay tip is money! Thank you!
@thebachelordj9 жыл бұрын
Cool tshirt! RIP Hooj
@DJSTEVESTONE9 жыл бұрын
+Chris W You can get them from ebay naughteesclothingltd and a lot more old skool & DJ T's I have and very good quality lots of colours £8.99 + £2.50 p&p
@Reddi9049 жыл бұрын
Hahahaha I never knew this!!! The hold tap button adjust the bpm manually. The club mixers suck!!!
@MrFullyCharged6 жыл бұрын
So you just defined a "session tempo" to the tempo-based FX module, which remains in place regardless of the tempo-destination knob, correct?
@MrFullyCharged6 жыл бұрын
I ask specifically because I have the Denon Prime setup (X1800 and dual SC5000s) and cannot do as stated in the manual to "define a session tempo for the fx", which is really breaking my heart! It makes mixed-genre and mixed-source sessions impossible for the fx module to appropriately process.
@djbbarcellos54263 жыл бұрын
THIS TIPS ARE TIMLESS MATE.! Yeww
@djayr1soulfulhouse838 Жыл бұрын
Cheers bro been watching DJ spen using echo trick. Just purchased and xdjrx3 and didn’t know how to do it
@florenthacq69635 ай бұрын
Thanks for the tips, the one about choosing the channel crossfader in order to avoid cutting the effect is super useful 🙏
@hoojchoons22583 жыл бұрын
Arh the Hooj Choons T shirt :) I had one back in the day that had something along the lines of "occasional providers of half decent house for a fucked up world" on the back :) Man I miss the early 90's!
@SuperBaconFishing4 жыл бұрын
Does any software still support the DJM-800?
@badrix69 жыл бұрын
Quick question: I've got a ddj sz, are the effects post fader on this thing?? It doesn't seem to work for me! Thanks in advance. Great vids btw, I really enjoy them!!
@marcelmarechal14207 жыл бұрын
I have old Hooj Choons on vinyl.........cafe del mar, game master and some others
@wreignone2 жыл бұрын
Hooj toons 4tw
@festaloteltv64822 жыл бұрын
Can we do that “echo” cut effect with djm 400? Thanks!
@mrjfadams16 жыл бұрын
Hi moe, needing to connect the rmx 500 to the djm 450,,, was under the impression I could do this with the top USB input send/return. It's not working
@lustforlow-end60223 жыл бұрын
Just go over the master output via rca. My DJM400 doesn’t have send/return so that’s what I had to do & it works well. Go master out rca to send on rmx, then return on rmx to your speakers 👍
@mrjfadams13 жыл бұрын
@@lustforlow-end6022 hi thanks... No longer running with this set up... Switched over to the S8 and Maschine 👍
@marcelmarechal14207 жыл бұрын
Well what if I got 2 cdj 1000 mk3's with this exact mixer?
@djkiran24074 жыл бұрын
Plzzz Tell me How to set Vinyl brake in xdj 700
@26szachy9 жыл бұрын
great, thx
@PRODIGY12341007 жыл бұрын
3:00 that is cool as fuck - nice trick
@jtv05 жыл бұрын
Does the S9 have post fader effects?
@7t2726 жыл бұрын
If your playing a track that is say 80bpm and the next track you want to play is 120bpm can you set the echo to 120bpm on the track that is playing at 80bpm ? This would be great if you can as thinking about buying Djm 750 Thanks!
@davidlogan89056 жыл бұрын
In this particular example, you probably could do it. Setting the echo to 5/8 or 6/8 can produce some funky effects - kind of like the 3/4 beat tempo and the 1/1 beat tempo brought together. So in your example, since 120bpm is 1 and 1/2 times 80 bpm, you could set the effect to 120bpm and at 1/1 beat tempo, and this would produce (in the 80 bpm track) an effect of 6/8 beat tempo. It could get messy, so you would probably have to choose your tracks and moments wisely.
@ciprianlupsa5575 жыл бұрын
thanks man! big up
@MrDjFrisco9 жыл бұрын
Good stuff to know.
@brendanwaldon21172 жыл бұрын
Super helpful!
@89jacek5 жыл бұрын
sub
@MrTech12108 жыл бұрын
Hi.... I've just bought a DJM-700 and was experimenting with this roll feature. I'm confused!!! After creating a 8/1 roll sample, when i assign the roll back to a channel, i cannot use the 3 band equaliser on that roll sample! I would really like to create a loop and be able to use the 3 band equaliser on it. Am i doing something wrong? I hope you can reply to my question, it will be very much appreciated. Cheers, Andy
@maranezzi218 жыл бұрын
on djm 800 you can't use equliser on loop (roll), so i think it is the same on your mixer. But it really sucks not being able to eq the loop!!!!!
@davidlogan89057 жыл бұрын
You could kind of split the difference between the sample and the main track, if layering like that is something you think would sound good. Just set the roll effect depth around, say, 8-10 o' clock and EQ the track as per usual. You can also use the colour FX here to create some nice layered combinations.
@davidlogan89057 жыл бұрын
Also, it's a good idea to use the decimal feature mentioned in the video when creating roll effects that long (4/1 or 8/1). Some BPMs are not entirely accurate loops. So, for example, 134 BPM roll will not match up with a track playing at 134. The DJM automatically sets it to 134.2, but even 134.0 won't be right. In this event you will need 133.9 BPM to create a perfect loop.
@andnegr9 жыл бұрын
Genius!
@rvltion9097 жыл бұрын
Hooj!!!
@fco2429 жыл бұрын
awesome vid, thank you! any tips on the Spiral please?
@Mojaxx9 жыл бұрын
Spiral is one of those which is a bit too specific to only a few models, I thought. But if enough people ask... ;)
@fco2429 жыл бұрын
MojaxxVDJ Thanks for replying Mojaxx, great job on your videos, and thank you for sharing your tips.