QWinOut DIY Quadcopter Assembly Instruction 02192-A

[@praveenasurapaneni1419]

Was anyone able to assemble it, we can't get past Transmitter central point calibration. help please, need more closer screenshots of the circuit connections on motors and callibration points

[@omguerra88]

Hi, we got your kit but we are not able to calibrate the drone like you do in the video. Could you offer any help??

[@yianni513]

Why is their no audio in this video...regarding the "Throttle Adjustment"...Video does not SHOW what to adjust nor what to listen(no audio) for or was this done at the factory...too many unknowns to deal with... The kit should have included instructions.

[@Jt-ow3oi]

When I first got this kit the battery charger would blink when charging,but now the battery charger shows no sign of charging could the battery be at fault

[@kerricbennett5350]

Hi. Can u help? I am having trouble calibrating the flight controller...step one of process. I turn the transmitter on, put the throttle stick up and turn the first adjuster on flight controller and i get no tone. Please help.

[@quickwinouttechnologyco.li4311]

hello,could you check whether this manual can help you?cdn2.shopify.com/s/files/1/0070/9473/0823/files/Radiolink_MiniPix_User_Manual_for_Racing_Drone.pdf?468

[@Jt-ow3oi]

What would be the problem the battery or the battery charger I use the US standard voltage

[@homeworks674]

I thought there was soldering involved with this build. This video shows everything already soldered and the transmitter already wired to the flight controller. Which is the part I didn't get right

[@kubilaytuncer2150]

HOMEWORKS everything is soldered, its complete, you just need to assemble it!

[@Jt-ow3oi]

What is the battery and battery charger company name

[@partheshpatel3608]

Watch this video if you don't understand the calibration parts: kzbin.info/www/bejne/eKa0c4yweN2df6M Explains everything very well

[@lonelyskywriter4155]

This it s a zip tie joke right

[@legitbeast8425]

No

[@homeworks674]

The problem is the wiring between the transmitter and the flight controller it's also already done in the video so I don't know which wire goes where. That's what I meant by the first comment

[@quickwinouttechnologyco.li4311]

Yes dear, to save your time, the receiver has been connected with the kk flight controller board. Do you have any problem when using it? We will try our best to solve it.