R/C V4 Car Final Modifications & Run!

[@LeglessWonder]

I've never been more proud of another person's accomplishments

[@Alessandro-dz3cw]

Same

[@rimooreg]

I must agree. This guy’s work, especially @ such a small scale, is quite incredible!

[@ryanwhite9709]

Amphibious, long range, accurate...

[@ratcrib]

seriously

[@robertr9689]

thanks mama

[@papik522]

I watched the whole series since the v4 motor test 11 months ago, i teared up a little. Amazing project, much love keep up the good work!

[@alphadog6970]

Amazing i was also crying

[@leandernss2147]

Same

[@rustlerboi1052]

My dog even teared up

[@rjansen6874]

Gays

[@addisme7561]

I can get you all a soy latte, harden up ladies. 😆😂🤣💩

[@bikeandfarm2940]

“I know it’s ugly” That’s the most masterful mix of engineering and design I have seen in a long time

[@greg6239]

@OrangeMan Rad man that was a compliment, he was just quoting what johnny said and telling him the truth. It looks better without the body in my opinion

[@greg6239]

@OrangeMan Rad damn your salty, i may be missing the point but wow Some kids were dropped as an infant. You were clearly thrown at a wall

[@greg6239]

@OrangeMan Rad says the little kid

[@bikeandfarm2940]

NeonTarget2 haha I was sleeping, what the hell happened here!

[@greg6239]

@@bikeandfarm2940 he got salty because i said something about johnnys car, sorry if i didnt understand your comment

[@MetikalMan]

This is like the best pet ever. That motor sounds soo happy to run around, like a lil puppy.

[@reedman0780]

Fcking true. I'd love to have this just to sometimes fuck around with it inside the house.

[@nangsteady2912]

Lol

[@datstupidassdudeatthecorne8614]

Happy motor

[@fish_R_stinky69]

​@@reedman0780Carbon monoxide 🥶

[@markcanlast12rounds60]

with this guy having 1M subscribers, i still think that he's hella underrated for his content

[@austinsears1637]

True

[@efecede22]

if u think this is underrated, just go to keith57000's channel...

[@Collateralcoffee]

He is not underrated. He is a bloody idiot.

[@rgstrayyy]

@@Collateralcoffee how?

[@standardheat-fs8159]

Almighty hoopa This Collatrealcoffee is just jealous that this guy has achieved more in a few years than him sitting 30 years in his parents house...

[@eins2001]

Me: *puts a performance part on my rc* "Now I have a custom RC!" Johnny: "Well ain't that cute."

[@D3nn1s]

Me: "I drive RC cars because its cheaper than the real thing." JohnnyQ90: "Ye right"

[@wepntech]

cheaper then real sports cars I guess. Probly not cheaper then running beaters into the ground though.

[@marksmith5156]

Depends how fast your rc car is going when you hit the only post in the open field that you took them to

[@sexdrugsrocknroll420]

BaHja what a loser q90

[@arneilsumbilon1900]

@@marksmith5156 q

[@connorjackson4083]

Lol

[@sloopy1967]

Just watched this entire playlist. Jesus dude, the engineering involved in this is out of this world, You are a very talented man. Subscribed

[@An-fr1yv]

The sound of that little v4 has a special place in my heart now

[@MicaiahLaCross777]

Can we just appreciate the amount of work this guy did, I meant cmon that’s like nuts!

[@markb.1517]

I agree we watched this guy completely engineer this car start to finish..its amazing wish I had the know how of this guy!!

[@albertchavez2693]

People are praising his awesome work :)

[@Limescale12]

But for what? It doesn't do much, does it

[@sharkbite5744]

limescale onetwo and it’s slow as fuck

[@theballisticcannoneer3728]

@@Limescale12 bru

[@frankintegrity7996]

The engineering is far too beautiful to cover with a body shell.

[@isacvestergaard4271]

I agree

[@DavutTaner]

kzbin.info/www/bejne/r5OuiWWbepekabM

[@alexisverduzco646]

But that body shell is the right body shell tho 🤙

[@themojangguy56]

A clear one would look sick!!

[@nickv329]

Of he somehow flips it it’s protecting it

[@giftdcam8472]

You say it’s ugly but we all love the engineering put into it. Amazing build and your skills make it that much better to watch the process!

[@KevinTalbotTV]

Can you change the springs in the transmission so it shifts earlier?

[@Dan23_7]

Hey it's our Kev 🇬🇧 👍🏻👍🏻

[@Thenormalguy_real_one]

No I do not think so

[@philippkaltenleitner7861]

Kev whats with your engine?

[@madnessdestroyer4093]

Geday mate

[@KevinTalbotTV]

hey peeps, yeh a got a few engine projects not as cool as this though

[@dizzy7859]

This is what i pull out of the trunk of my 97' Camry when the girl I'm picking up for our first date asks "where's that nice car you're always talking about?"

[@ericfernandezfont2115]

Really cool coment bro ajjaja 😎 but I always hsted Nicolas Cage xdddd

[@DavutTaner]

kzbin.info/www/bejne/r5OuiWWbepekabM

[@baoofficial1309]

@@ericfernandezfont2115 hahahahahaha

[@rabidrabbitsmokingneonlights]

🤣🤣🤣

[@Cloobornius]

People would see this and think "oh look at this grown man playing with something he got at Walmart" when in reality it's a dedicated engineer and brilliant creator that's taken months of hard work to bring this project to a culmination. This is beautiful Johnny

[@Project337]

This was way too articulate and thoughtful a comment for most of the internet.

[@johnathanwathen4165]

What amazes me is the precision of all the small parts in the engine. The crank cam valves pushrods .... just blows my mind the kind of skill it would take along with extreme patience to engineer something as perfect as this and for it to run like clockwork. All I can say is WOW!!

[@RSS_3787]

Everyone: standard single piston nitro RC JohnnyQ90: ya no that’s not going to cut it.

[@TitoRigatoni]

Keith57000: lol, that's cute. Here's my V10

[@iahash5616]

@@TitoRigatoni LOL !

[@thomaspigg306]

Young man, I don't care if anyone else likes it or not, but you get a perfect 10 out of 10 score with me. All the pieces and parts you made by hand were exceptional!. And I also enjoyed that you showed where you went back and remade the parts and explained why you done so. Kudos to you Sir!!! Look forward to your next build!

[@keithd9705]

Totally agree!!

[@memygunsandI]

That is honestly one of the most impressive things I’ve ever seen!

[@justinwoodford6698]

Mkjjj

[@khakibiscuit3045]

This thing isn't ugly at all it's a work of art

[@StrongBodySecrets8]

Ik when he said that i was like tf that thing looks amazing

[@gnustep]

This has got to be the most epic RC car I have ever seen.

[@joematthews3379]

It is awesome, I recommend also checking out Keith57000 on KZbin. He's making a 1/5 scale V10 hybrid RC car 🤯

[@straight6petrol]

I would be terrified to ever drive it after months of insanely hard skilled work!

[@-joo3033]

@@joematthews3379 * isnt it 1/3?

[@northtexasskies3243]

@@-joo3033 yes

[@The_Mimewar]

He machined that car from blocks of metal. I can’t think of a more impressive RC car

[@Cipirano]

When I was young, like 2000s, I dreamed about car like this.

[@JohnnyDee62]

When I was young, like 1970s, I dreamed about a car like this! 👍😉

[@DoRC]

If you were young in the 2000s you're still young.

[@MaybeKian]

@@DoRC lmao no. lets say he was 14 then , he would be 34 now. if you consider that young, then lets say he was 34 in the 2000's . then how is he in 2020 still young if he would be 54? think before you speak

[@sultanhassan2505]

I still dream of these cars because in my country only battery cars are available which reach maximum 4km/h

[@ResinstanceMike]

Dude totally

[@letsbricktheworld4213]

Me: uh i don't have the right pieces to finish my model... I will never finish it Him: Let's craft it !

[@brianchen3964]

he downloaded his car!

[@FargothPL]

His car looks beautiful, but this "beauty" was paid by weight. I think that car has become really heavy and slow. It has a lot of things that look great, but are too heavy. Typical car for display on a stand and nothing more.

[@poptartmcjelly7054]

him: haha CNC go brrrrrrrrrr

[@isaack2274]

The engineer

[@EDay340]

I guess it’s just because you’re doing it yourself, but this is one of the most incredible things I’ve ever seen…

[@thewakz]

Just FYI we are always down for more "testing" videos.

[@ericviger4984]

I watched throughout this whole build, I'm sad to see it come to a close. But damn what a build! Fantastic job, I can't wait to see what's next!!

[@markotik2]

Eric Viger Yeah, me too - it’s probably one of the best RC cars I’ve actually seen. Love the work that went into every single part - especially those brakes man, they look amazing !

[@familyman831]

It is amazing There is a guy who has done a giant 1/3scale rc v10 hybrid ! From scratch have a look I will come back with the user name I forgot I think its kieth75000 somthing like that

[@brux9553]

man i wanted to hear the engine just go for like 8 seconds without stopping

[@Stirlingkit]

that's a toyan engine

[@DAVEMACHINEGUN1]

he wont rev it out it seems. you can tell he is holding back with letting it go further in rpm.

[@tobybrett9371]

Watch the video from 12:53, it doesn't rev high enough to engage the next two gears. He doesn't want to run it out in first and ruin the engine. The next clip shown is as fast and as high as it will rev.

[@user-sn5kj1gy1t]

Toby Brett yeah you’re right

[@Krazee4honda]

This is literally a work of art my friend. Skills!

[@microbuilder]

Man, what I wouldve given for a remote start system like that back when I was a kid! Definitely one of the coolest RC car projects I've seen in a really long time, great work man.

[@marshallmotorssc]

Wish I could like this twice.

[@PJPEE]

I don't usually like videos, so I'll do it on your behalf

[@marshallmotorssc]

@@PJPEE you are scholar and a gentleman sir.

[@Hitherto90]

I wish I could like this v4 times.

[@Rhakjellg]

Marshall MotorsSC. I see what you did there. You bitc- I mean genius!

[@chillieuwu]

You can like it 3 times

[@NoCluYT]

This channel is made for people that are still awake at 2am.

[@GMM-j92]

ikr

[@cjsi2448]

Yooo wtf, i read this shit and it’s 2am

[@Jarl2392]

Word xD it's 3.18am now

[@user-yb6ft9zw6z]

I agree with you it's 1:30am pacific here while watching this on my phone.

[@jm036]

11am here lol

[@chrislampkin4952]

This is amazing it's like watching a model car come to life im beyond impressed at this masterpiece

[@gordanagoran86]

Oh my god FINALLY ive been waiting for this beauty

[@harveyh9817]

Lol

[@gordanagoran86]

@@harveyh9817 UwU

[@maoristereo]

I love how over-engineered this thing is.

[@u.s.a3940]

OMG PEWDIEPIE commented on my video😀 kzbin.info/www/bejne/q16QdZKBjqyhhNU

[@MattMilner]

that's the fun part of being an engineer. Lol

[@techticalgaming2296]

@@MattMilner : that's the fun part of being an engineer Engineer : lemme get on to this shi and lemme recommend this to all the engineers too

[@slowdriver6868]

Over-engineering is the best engineering

[@Repoocn]

DoYouEvenGameAndLift BRUH comment of the year sir

[@slowmoer-slowmotionvideos2066]

10 germans engineers must have reborn into one you. Over-engineered and that's what makes it so awesome. Inspired me to get a lathe.

[@nilsottomanz]

Drei von zehn deutschen Ingenieuren kommen aus Österreich, die anderen sind in der Schweiz geboren.

[@AaronSchwarz42]

No chinese lathe with plastic gears, get something well made with metal gearing that will hold up well over time like a Cummins 6BT engine (gear driven cam)

[@slowmoer-slowmotionvideos2066]

@@AaronSchwarz42 Yea, I noticed they don't look to good. I actually found some older second hand lathes. :D Will check them out.

[@maxflute7893]

@@AaronSchwarz42 How do you get from a lathe to a thicc diesel engine? xD

[@mr.professional7]

@@nilsottomanz 🤦‍♂️

[@Cbro-621]

Dude!!! This is the most amazing and beautifully engineered car I have ever seen!! I’m not even going to bother asking how much time and funds into this beauty!! I’m hooked bro

[@rezang5026]

Imagine living in a miniature world... "Honey, I love your new car but it's all engine"

[@gotguts5423]

Always has been

[@bretzeletouffeur7401]

That is exactly what she said when we went for a ride with my new Bugatti Veyron !

[@dickmansucker1972]

Bretzel etouffeur mmhm

[@mattheadplus]

"Selling Custom EVO, 5 miles on the odometer, fuel economy is great! Gets 500ft per mL" 🤣

[@frankieieie]

thats the most over engineered rc car ive ever seen, and thats amazing!!!! ive always wanted to see one of those engines in a rc car.

[@xKevmachinex]

imagine if real life cars braked as fast as that, your internal organs would get slammed against your own body lol.

[@lombarfocastadar4576]

I dont know about that...it would be an interesting experiment to perform...

[@gavinfaync]

@Mr Man They also do it everyday and are in amazing shape compared to the average person

[@michaelcharach]

Tesla Model S Plaid probably just as fast to scale.

[@MasParaQue]

"not the fastest thing you you've ever seen" No, it isn't. But it's definetly the coolest one

[@bangbang51211]

It would be cool to see if you could stuff a small camera in there to get a PoV shot. You might even be able to set it up like one of those first person racing quad copters to make it more immersive and fun to drive.

[@bigboy6691]

Bruh thatd be cool 😂

[@elgorriongordo6528]

Fpv

[@JeReeMyKinDom]

prolly way too hot for the cam to survive

[@heybulldog137]

Put it on the roof

[@KingLizardWizard]

i have no idea what’s going on but i’m enjoying every second of it

[@krankyargentavis4791]

David Slater your profile picture is my home wall paper

[@KingLizardWizard]

Kranky Argentavis mad respect homie

[@Batman-ro3mk]

😂😂 me too

[@Sssssssht]

The best part for me is, he got the individual BRAKES ARE YOU KIDDING ME thats so beautiful

[@KevinTalbotTV]

Amazing work!

[@carternevill]

Kev, hopefully the crawler turns out like this!!!

[@mr.boombastic8612]

@@carternevill agreed

[@kanekikenkaneki5924]

I like it

[@DavutTaner]

kzbin.info/www/bejne/r5OuiWWbepekabM

[@deleted_account3]

When are you gonna get to work on that crawler

[@machinerin151]

Aww, come on, try pressing on the gas in a straight line! A proper drag race would be great!

[@joshs7408]

Yeah decent length full throttle shot would be good to see

[@nathanaelsmith3553]

Put a go pro on it

[@joshs7408]

@@borisnorris5812 if that's the case, fair enough. Don't want the masterpiece destroyed

[@AttilaAsztalos]

Can these things even go straight for more than 20m...? It just seems so twitchy and impossible to really line up with the road to any length of time, permanently in need of a slight correction that invariably ends up being more than "slight"...

[@BryantWhite86]

@@AttilaAsztalos I think most rc cars are like this. I could be wrong, but I don't think he is experienced in driving RCs and give him some time and it will look a lot better.

[@brendanedwards1416]

It’s crazy how similar it sounds to an Aprilia RSV4

[@aircommandslipperz]

same v4 engine config

[@sachinh1635]

@simonmadmax simonmadmax no way really?

[@brendanedwards1416]

najmi ismail damn your right, someone should’ve made a comment comparing the sounds

[@Sly_Wolf_1]

"I know it's ugly" WTF that looks awsome, what a masterpiece. Thanks for taking the time to film and share.

[@NeoIsrafil]

I'd love to see how she handles when shes able to engage her gearing. Pretty epic build!

[@yungblaze223s]

*him

[@ReigVFX]

@@yungblaze223s incorrect. Cars and other vehicles are she/her.

[@dogsandwich-b2r]

For men its she or her 😘

[@hex8387]

I wanna see this level of love, skill and patience on a same size f1 car model

[@BasedStreetRacer]

“The engine doesn’t rev high enough to engage 2nd and 3rd” *Next Video* “Engine swapping the RC to a 0.2 liter V8”

[@th5384]

😂😂

[@felicyadavina331]

Au

[@flatlineryan]

They actually have a v8 bently rc car i saw on yt that thing sound crazy too

[@ramo1484]

If you want rev go rotor but that weak as shit go 4 rotor or more that would work

[@antoniosanastasiadis]

If he does he’s a king

[@bloodandcarnage]

I have never had the patience to make such involved things. I make more practical things only because I lack the skill and patience for such things and in saying all that... I know what it takes to make the things you make. Truly skilled and talented. Such small tools and creations. I never could do that unless it were life or death I imagine. I can only struggle to come close to your skill.

[@mikedeezle2249]

Amazing craftsmanship!! The _patience_ plus time and energy involved... Kudos brother! That is a piece of *ART* my friend!!

[@justinbenscoter2052]

Some serious talent. Like next level. For that thin aluminum, if you set a tig welder to DC negative (instead of the standard A.C. Used for aluminum) and use a sharped tungsten(basically the set up for stainless) it will allow for much greater heat control and you will be able to tig weld those parts instead of glue, or solder. And use TINY wire! Old timer taught me that’s how to weld a beer can back together;) Keep up the awesome content!

[@RCTanksTrucks247]

Absolutely amazing brother. We'll done

[@normangarrettsr3102]

Before you put the body on, that little car was talking. Listen for your self. It's saying run ruuuun ruuuuuuuun. Tis a joy. Thanks again. I gotta subscribe now.

[@Sticker-Happy]

“What do you think Lance?” Lance: “It’s an amazing machine!”

[@_W-H-O_]

All this video is missing is some snake skin pants

[@lucasblanchard47]

“40 or 50 weight?”

[@jesseclark8904]

Is there such a thing as “final modification”?

[@wyattweiler7208]

Ask my copy of skyrim

[@PaulyRenzeth]

Ahrim Raziel i feel ya

[@thesciencesphere4273]

Ask my copy of gmod

[@seanmc0936]

No

[@Pythnn]

Ah, I wish

The moment when you realise that this model car is probably more expensive and better put together than your actual car

[@Babihrse]

It's put together like a murcilagio all handmade parts each one with every part clearly thought out to suit the job the car demands of it. That car is worth over two grand at the lowest price but it's hard to quantify a value on it as it's a one of a kind completely handcrafted and has been built from nothing so it could be worth more than any of us could afford.

[@brandonmusgrove6294]

100% true.

[@thebustosfamily]

Not really I own a MB AMG which is also hand crafted. But that RC toy is impressive.

[@initialyeet3951]

Niall Dunne murcielago

[@euroshane]

Dude this is the coolest thing Ive ever seen!! The car has functional freaking disc brakes, my mind is blown

[@eBikerHowie]

Loved every second of this build since day 1.

[@HRM.H]

Great to see it run. Been watching the build since the beginning.

[@MikeyJMJ]

Rick from Pawn Stars: *"It's not an official Evo and it's not road legal plus it's such a niche market, best I can do is $20"*

[@robthomas9936]

I don't think Rick would know that much about it. However, he has a guy that knows more about this kind of stuff and he'll come take a look at it.

[@daveh7517]

Hello Rick, I'm the expect on scale-evo memorabilia, in perfect conditions these will sell for around $1000 but in my expert opinion, this sample is around $10. You see, the body has been replaced and it's not appealing to collectors. ----- "I'll give $10 because I'm taking all the risk. It might stay on the shelf for years and these thing aren't what they use to be" -- Pawn Star Rick

[@mikehawk6175]

@@daveh7517 if it was worth 10 bucks rick would only give the guy about 6 bucks for it and then the guy would say 8 and rick would say 7 and the guy would cringe and then finally agree. In the end the guy would tell the camera that he made a decent profit and that he got it from his grandma for free and he will say he will take his girl to dinner with that money and giggle like an idiot. That's pawn stars folks lol

[@leejohnson5713]

Rob Thomas he has “buddy” that knows everything there is to know about this stuff. He’ll give him a call and get him down here. Take a look look around and he’ll be back in a few minutes.

[@WALKERSDESIGN10]

One hell of a job. Amazing job laying everything and the headers. Amazing.!!! Everybody has said the motor is to sluggish and don't work with gearing and what you did proves not only looks it, it really has low-end and high-end torque. Seriously you have really made a huge accomplishment. Love everything about it! Great J pb

[@ChiragSanil]

11:51 Omg! It's an all wheel drive!😯🔥🔥

[@madoba8717]

What a masterpiece! Imagine how awesome a mini turbocharger would be on that. (Don’t come telling me how hard it is to make the whole assembly, i’m very well aware of it.)

[@MrT3coma]

rbinnovations.com/

[@MrT3coma]

they have nitros injection turbo intercooler jajajaj this is the most modded car ever

[@andito9973]

Do you even know how hard it is to do the whole assembly??

[@madoba8717]

collard alexandre i had that coming lmao

[@quintondafel225]

Unbelievably brilliant. An amazing feat. Incredibly neatly built. A pleasure to watch you work!!!! Very well done

[@user-nd1kv8qb5w]

I just love what humans can come up with. I'm definitely not that gifted but love seeing what people that are can come up with. Amazing buddy!

[@Tedkelvin]

Me: wow I can't even paint the Damn thing. JohnnyQ90: now to make the Damn thing AWD like a proper Evo.

[@NudelKungen.]

All the wheels did spin when he started it up, so it’s probably already AWD

[@DeveroyB]

It is already AWD

[@tim3437]

its amazing how when even very small it has sound characteristics of a v4 motorbike...cool!

[@nectarnostalgia]

Am loving what you are doing? Brilliant mind, amazing skills. You are blessed

[@ngophuong4548]

I do not dare to comment on techniques. Because I can't do like you. I just found that: You are too good. Very neatly, every small detail is very real .... Above all amazing !!!

[@volvo245]

Saddest sentence in English language: "This engine doesn't rev high enough. "

[@AiOinc1]

"Is it in yet"

[@errwien]

its easy for jhonny to fixed it,.. go Jhonny..Jhoony..Go

[@ShawnKitchen]

The saddest part is that he never holds the throttle open for more than about 3/4 of a second. He'll never get it sorted out properly if all he ever does is BRAP BRAP BRAP BRAP BRAAAP BRABRABRAP BRAAAP BRAP BRAP.

[@carternevill]

The evo's yours. What do you mean? You drive for me now, do you think I'm gonna let you roll in a Hyundai? 😂

[@LukaArtelj]

you have absolutely NO idea how to drive an RC car!!!!, you have idle throttle or max, wtf u are so stupid

[@uncannysnake]

@@Welander_ I think it's another reference

[@marcusthegamer348]

@@LukaArtelj lol calm down wtf

[@austincower778]

Han from Tokyo Drift

[@carternevill]

@@LukaArtelj I'm not the guy who posted the video, I only commented 😂

[@rcrevolution]

Now thats what i call “Craftsmanship”

[@gxddfried]

I think it's cute how you built this little car, how it drives around and I think I'm happy inside like you about it. this is a crazy amount of work and talent but it makes me or us feel like children again. thanks for sharing and a lot of respect!

[@Bill_Bacon]

This is r/c heaven, and I didn't blink the entire time.

[@DreamGaming12]

6:40 That’s art not ugly. Absolutely beautiful

[@loco82]

Wow, I'm not car rc person but the work put into this is amazing. Sound of that engine ticking over at idle is beautiful. Amazing work well done. Loved to have an engine engineered like this to go in one of my scale rc planes. Kind regards Dan

[@blacknight1003]

Hey! Watched them all, you’re a talented young engineer, stop beating yourself up. The finished result is terrific. Thank you for sharing.

[@vulduv]

12:53 couldent that be fixed by adding a gear ration that increases rpm before the gearbox, and then change the final drive ratio to compensate? (and good job on the build so far :) )

[@americanwillpower]

what I was thinking..play with the gearing it may give massively better acceleration and with more gears better top speed!

[@vulduv]

@@americanwillpower the gearbox he is using is non adjustable. he would have to replace it intierly to change the gear ratios in it. (or deconstruct it) what i was suggesting was to add a set of gears before the gearbox to get the input shaft of the gearbox spinning fast enough for the gearbox to engage anything higher than first gear.

[@Alexx__xD]

@@vulduv couldn't you change the weights inside the trans which makes it change gear?

[@MrT3coma]

sounds badass is badass....exept i had this rc...schumacher fusion 21, fusion28 menace21 nicest looking rc but the gearing is the worst part, plastic weak 1/10 scale it used to break with 2hp from the original nitro tundertiger engine, its just a pice of plastic that opens with centrifugal force against a spring and hits the inside groove of the gear with no cluthc, and the shaft has a 1mm pin through it wich snaps...so it is ajustable just put a softer spring in but then it will bog out..the gearing is meant for nitro to go 200mph...he would have to replace the hole thing

[@vulduv]

@@Alexx__xD he said it wasent adjustable, so i just assumed he couldent disassemble the gearbox. ither due to not being able to put it back together, or the disassembly being very destructive of the gearbox itself (i havent seen the gearbox or i dont remember it) but if he could change the weights in it. then that would be preferable.

[@DomEngines]

First of all: well done! Showed this to my friends and they like it aswell! Maybe an idea for another series: pickup truck with a rear or mid engine. Something you'd find on a pro car series. What do you think? That'd be a challenge to build :D

[@gusdarwin61]

next : put a real front and rear lights on, that would be perfect ! great job dude ! love it !

[@สมดึ๋ยชริงเด้]

Next: turbo+inter cooller

[@benblakemore4195]

Just a beautiful evo bro 😆 absolutely astonishing! !!

[@andrejs9112]

I remember back in a day i built something similar with 1970 charger metal body.. It was overheating so i had to make air vents functional.

[@rcmaniacandmorehuntermarti5173]

You just gave me a idea for my arrma senton project truck

[@msbs1813]

Man I love that!!!!! I’m impressed be proud of what you done. The brakes pure genius

[@quantomic1106]

We need the Brooks Moore from "How it's made" narrating this.

[@stevenfielder0912]

Every time I hear his voice I fall asleep

[@ballsacksniffer420]

Even better: morgan freedman

[@neoleomedia1676]

SAMMY THESLAM, more like even worse.

[@chriscollison933]

Are you joking it’s the coolest thing I’ve ever seen my jaw is on my desk right meow watching this in a state of jealousy I’ve never felt before! Your the man and please don’t stop and see if you can make a inline Cummins turbo diesel rock crawler? Lol

[@evo9rs]

It wouldnt be an Evo without drivetrain issues 😆 Love it

[@thesecretcouncil]

I visited youtube to see cat fights but for some reason I ended up here, watching the entire video for no reason.

[@rjf5218]

I loved the engine sound LOL. My first time hear its sounds like a real car or a motorcycle engine.

[@solomonsolane8771]

Man u have got talent,i'm a mechanic nd with all that u do nd all the machines that u have,it makes me think like an amateur, good luck u really have a talent.

[@thetoddperspective]

The car is a masterpiece, for sure. But I'm drooling over those shop tools..

[@followthegrow108]

Imagine having a full-sized evo 6 with an engine that big lol

[@Zyscheriah]

Engine on wheels. Lmao.

[@routtookc8064]

A 42 liter V4. XD

[@DavutTaner]

kzbin.info/www/bejne/r5OuiWWbepekabM

[@GodWeenSatan]

Looks like something Garage 54 would make out of a Lada

[@Atrumoris]

Huge ass fan spinning at 3500 rpm would be located just inches behind your back. No thanks!

[@thehasinhafiz]

When you giving it a Dyno run🤣🔥

[@victorngigi6074]

seeing this tiny evo come together fills my heart with so much joy.

[@AvanWijnsberge]

This is the best sounding RC Car i've ever heard!! That thing sounds amazing..

[@gonzalonaveira6940]

Johnny saying "It looks bad", and i'm here watching and saying "This is amazing"

[@johnrbruestle]

I feel like going FPV on these would be so fun

[@gerrykavanagh]

Fuck it... dual camera 3D FPV