R32 Skyline Rear End Refresh!

[@jspeedracing]

You’re killing it Adam! Love the attention to detail even when not everyone sees it. Very influential for my builds. Keep up the good work man.

[@martinred6237]

this is ghetto build compared to tommyfyeah haha

[@RockingItInSofia]

I love how over the top this car is getting. I just love it.

[@JzLyfe]

For ppl wondering about subframe bushings, if it's a street car and you take it to the track every now and then go for polyurethane bushings and yes they sell them. If it's a track car/drift car, solid bushings are the way to go because of what Adam stated, road noise etc..

[@toddbrown4185]

Watch Nicole snap an axle next event now that you used the villains stubs on the 32 XD

[@JMarswav]

I JUST REALIZED!!! car youtubers like mcm and adam are the only ones that keep high quality content and havent changed with fame and shit. #respect

[@WelcomeToTheMadness]

Big Boost with the super assist. Great work gentlemen.

[@allanadam4553]

Very nice and informative👍 I’m by no means a mechanic or have the set up you do but I did tackle the axels from under the car. Blew a front cv boot, mail lost the two oem ones I ordered, looked at other boots and decided to redo all. Four jack stands and 6 hrs later had all four axels out, local shop had them rebuilt and painted back to me in 3 days for $500. In mean time cleaned everything I could get at under car, primed, painted gloss black and undercoated. 3 days of work in total to get it rolling again. Will be watching the continued progress with your car, mine will end up being a track car, nor a drifter.

[@aegisgarage1571]

I love the fact that you not only focused on redoing the suspension but just went ahead and beefed it all up to make sure it can take the abuse

[@rjpurps1200]

Love how in-depth you are with your builds

[@Aepek]

Am so in love with your cabinets & drawers setup with your tools.... So wish my home garage was like that.....Some day, some day😉 Liking the Red colour, looks great

[@DillonCarey]

Hey Adam, I'm a huge fan, been subscribed for a long time. And as a car person that does not ride bikes, I can say I watched some old videos again of yours from like Woodward and they were sick! I think you should definitely bring back some bmx for an episode. Have a jam at your house or something with old friends. Anyways keep it up man!

[@newschoolaesthetics]

Awesome progress Adam! So dope and by far my all time favorite car channel to watch on KZbin. Adam LZ and BoostedBoiz!

[@Drifftpanda]

Omg Adam That Power coated Rear Subframe its such a Turn on so pretty . !!!!! Loving that color pretty much match with the Valve Cover sick, nice pick.

[@therealpofo]

I like how Tommy has influenced other youtubers to step up there finish quality game. I enjoy it as attention to detail.

[@destin6041]

Is this a tommyfyeah video?

[@lilgater1234]

Destin Ginnis lol

[@danielkapsi3137]

Needs more zinc plating

[@destin6041]

Daniel Kapsi this is true

[@ilikeboost4764]

Destin Ginnis I think you mean " Deep voice GTR guy"

[@Tuxedorunner]

Everyone is wanting to be like tommyfyeah

[@Shaolin0871]

I love how your mind works Adam.

[@onhawaii]

Now tell me that this huge oil pan is not hitting the speed bumps! I hope you make the oil pickup reach the of it bottom too!

[@mclarenjohnf1]

Looking very pretty and the Oil pan is now massive you won't have oil starvation with that.

[@funkmasterjay]

Yes you can still buy OEM bushings and most parts from Nissan. There was a big announcement a year or two ago.

[@GARAGESZERO]

jason nortey nah you can’t buy subframe bushings. Only a complete subframe with them in already

[@funkmasterjay]

tommyfyeah strange. Here in the UK easily available but I guess the car is more popular.

[@RockdaGamer]

Adam pls get the wheels powder coated the same red as the sub frames and valve cover loving the build!!

[@KyleHidalgo]

Looks so good Adam! I'm super jealous! Hopefully my car/channel will grow into something amazing like yours someday! Keep Killin it!

[@ItsCardo1987]

Sitting here cursing putting my rear subframe together... good little motivator man.. hope to see ya at GTR festival this year or coota

[@veinreload4527]

Absolutely love your cars and all your vids keep up the great work

[@Nasonix2]

Small warning, with 2 extra liters of oil, it will take slightly longer for the oil temps (car) to heat up to operating temp. As well as take longer to overheat! just keep that in mind before u go hammering on it

[@angelodiaz9622]

Excited about the skyline build

[@byGiNeSiToX]

Too bad you can’t see it, but knowing that you have is cool

[@ifaz4029]

5:57 the gk tech looks like 👌🏼

[@lukebertram5304]

with the toe with how it changes when the wheel goes up is called "bump steer"

[@MrNicoe36cabrio]

Awesome stuff guys. And I love the colors.

[@adamsteele6683]

@Adam Lz Looks good, excited to see you rip it up on the track! Do you plan to do a short update video on your garage? I remember the video with Matt when it was finished up, but could you do a new with talking about the tools you use. Specifically your power tools, air compressor, and welder.

[@iceteaairsoft]

Can’t wait to see her all finish

[@weekendwarriortv3950]

Adam always full sends his car rebuilds

[@williamcourtney8547]

Exellent content. Love the detailed explanation and it makes things LOOK easy👌

[@liammcgrath6184]

Did you put magnetic pick ups in the oil pan to keep away from the bearings ?

[@Mr.Wigglles]

Hey Adam i just want to say your so inspiring and you make me want push my self when am riding its only the second day and am push to do ne thing like jump sketchy stairs and bunny hoping thing i just want to say thank you for inspiring me to ride and ride hard

[@michaelteeter3886]

I saw on boosted boiz that he made a trap door for the oil pan so oil would stay in one area rather than slushing around. Maybe it would here too?

[@jm102897]

You should make a video on Nicole’s Miata tomorrow Nicole and i love that car it’s so cute and it sounds so good with the ISR exhaust and the pops it makes and im very excited for the new paint and turbo and Nicole should drive it and she should race it and she should drift it to and you should figure out the starting issue and figure out whats going on with it and also figure out why the ignition connector keeps on melting for some odd reason

[@toxicmongoose7061]

if you didn't want to go OEM bushings or SOLID bushings Energy Suspension sells Poly bushings. The main issue though is people cut out the back sleeve. I have a video up of not cutting the sleeve and the poly fit. soon as you cut the sleeve out you need solid. as FYI

[@realkilju]

That subframe looks so delicious

[@anthonylagan9486]

You can use the gun in the car if you use a impact wobbley extension

[@boot-strapper]

Megan sells harder rubber subframe bushings for s13, im rockin those

[@andygohn1877]

Dont you have to have a lo ger pickup tibe to be able to reach the extra oil if it sits lower that normal

[@MumbleVlogs]

Thats a nice looking subframe, attention to detail 👍

[@jdubayou9498]

You can freeze parts real quick by spraying a can of dust off up side down on the parts.

[@toxicmongoose7061]

chick on the chili sauce bottle has some mad tow in!! needs to get that rear end realigned.

[@wizkean5988]

aye adam loving the skyline build

[@rupertforster585]

Looking fresh, really enjoying this build, turning out to be one of my favourite cars you have...

[@backintogear9071]

That pan looks so sick

[@GeorgeHampl]

What you were looking for is the oil breakdowns slower

[@cwiedemann17]

I love a nice fresh rear end

[@thatssopokemon7838]

This is definitely a show car but it's a damn clean one so far!

[@seo6547]

I like how you say you just want a car to throw around and then proceed to get the whole car redone

[@Airwahab2002]

Adam keep up the great work

[@mtb1366]

It looks so much better now

[@carljohnson4503]

The R32 is looking fucking dope bro 🔥

[@igo-r]

Perfect job! greetings from Spain!!

[@aronrobles3911]

I like how you make your car clean, and also that you don't widebody every car like tj hunt😂

[@rbarmy3841]

You should put Gates in the sump to help with Surge on hard cornering

[@ChannelPineappleSon]

Jimmy Oakes always freezes his bushings!

[@TheRagingHillbilly]

Do you have enough clearance to add small fins to the pan extension to add to the pan surface area to increase your oil cooling capacity?

[@shaolincruz2891]

Sup Adam!!! Love this contest keep it up 🤘

[@justast4458]

#NotifSquad! Keep up the amazing work dude!!!

[@NCFREEMAN]

Rad suspension build LZ!!!!! It's nice having good friends to help to!!! Dickhead Tommy seems like a really good dude!

[@nefmamba4781]

I am thinking about installing a 13B rotary engine in a mini cooper give me your opinion

[@arturotrejo8850]

Nefmamba do it

[@rupertforster585]

YASSSS that would be insane I need to see this man

[@jdm_tuneerz6517]

Nefmamba do it

[@karriebhurgari3933]

Nefmamba hell yeah do it!!!

[@TunersGTR]

My opinion? It would be a wild ride.

[@haydenmadigan8186]

"I bought this car because I was tired of projects and want something reliable" famous last words

[@eclipse3381]

9:06 Adam the word you're looking for is pressure

[@gavnott4563]

Hardrace do a subframe bushing that looks oem

[@nopenope843]

Yeah you can buy OEM bushes, you can also buy polyurethane bushes that have very similar feeling to the solid bushes with a much better ride.

[@topclassdabbing_474]

Good shit bro love the videos ! More in the life stuff man

[@Gremlins8everything]

Wish my 25det r32 was this clean damn

[@nemosad5674]

You guys are car God's🙏💪💪💪

[@theogpaulmolnar3547]

Idk if u know what that actually is or not because that it’s what’s known as bump steer. Go look that up and it’s a really big thing in racing. There is a tally a gauge for for this from longacer. And if I’m wrong plz correct me cause what u described sounds exactly like that.

[@tanyonholzer2741]

Just got a 68 got for my 14th Birthday now it is time to restore it

[@Midnightkilla91]

If that skyline axle is like the 180sx axle 5 bolt there good for 800 hp it's why there super saught after

[@yamilz32]

I have ES and going going Nismo solids in my Z32 subframe very soon. Please tell me that you did not regret adding those solids to your R32.

[@Based_Trucker]

I going to buy the 350z axle stuff for sure.

[@leonardocarrasco2259]

Dude dont forget the s13's we miss them

[@PWNSTERSkyline]

I don't recall, but have you installed a head drain to help with the oil starvation issue. the main problem with rb's is the head not draining enough oil and just collecting it.

[@jamesfcookjr]

What about the oil pick up tube Adam 🤔😊

[@mrhydratedm768]

Love the channel bro👍👍🔥

[@andrewspringer6945]

keep in mind that more oil will take longer to heat up but it will also take longer to cool down

[@jordanclemmings9437]

Adam can u please one day make a shirt or poster with all of your cars drifting together

[@bdadsmagee]

Zinc plate the subframe bolts and make 10 videos on the subframe and youre in good standing

[@Drifftpanda]

Dude i have those DSS Axles to - i just redo them every 3-4 events because they keep getting loose wich is sucks your are right - Also what i did today i replaced the Bolts thats go to the input shaft to the axles those 6 L key Bolts - Class 12.9 - I just Replace them for Hex M8x1.25 - 25mm Class 10.9 they Fit right in making my life alot easier cuz those 6 L key Bolts sucks to LOL , Greetings From NYC

[@brianlinga]

You should get an accusump if you're worried about oil starvation.

[@shushpants5845]

@lonely_drivers where u at with the bushings

[@J8ck_hoff]

I miss vanilla coke don't think they have it anymore here in Canada that shit was amazing.

[@staticmz3398]

Jake go to Wendy’s they still have it(if it has the new drink machine)

[@COALEDasICE]

We definitely still have it here. You just need to look more places.

[@hayden3408]

Almost every Macs/Gas station/convenience store has Vanilla Coke in Toronto and the GTA

[@maganna323]

Hey Adam, Are you going to do a video with hoonigan once this build is done?

[@AllenBrooks]

Dope....how's the ramp in the backyard, she getting used?

[@axyspryzeegaming6031]

Good job adam👍🤘

[@jackliversidge5665]

Here we go 😊

[@VW7472]

I assume you lengthened the pickup tube also?

[@exoticsenior636]

Nice video but i have a question... Where is the bwm

[@micaiahwunch4572]

ADAM How do you always come up with some of the best color combinations?

[@mossygrace2137]

More of kind helpful tommy

[@niclaughlin5688]

Sick video adamfyeah!

[@lewisware9266]

Hello Adam sick video

[@tank8388]

Hey Adam sorry to bother I know your really busy but I was going to ask what tear subframe did you use I know it’s from a s13 but dose it matter the year??? I’m actually doing the exact same set up on my skyline suspension wise

[@user-xq1qs1cf9k]

*Happy August 1st*

[@sprayboy8]

why not get an accusump to guarantee oil feed?