RB25 is in the Drift Skyline!

[@JrgProductionsRSA]

Cannot wait to see the SkyLime and WildBerryBoost doing Tandems 😁

[@manji1306]

Jesse Ghela We need him to make skylime happen 100% screw the plain white.

[@JrgProductionsRSA]

Flow Yesss 😂

[@kylescarborough4084]

Personally I'd like to see all the AC stuff in detail as we've never really seen you and alberto tackle a full AC system :D

[@bslzyirrb7700]

MinerGate fr 😂

[@justinwright54]

They built a custom ac system for Nichols car using Honda parts!!!

[@michaelc51388]

Bigger oil pan for the skyline and 335i update please 💪

[@kingmidget7123]

michaelc51388 i’ve heard that it’s being shipped to germany to run on the Nürburgring in the fall, that could be wrong though

[@miguelpineda9525]

King Midget71 your correct

[@SortaProfessional89]

King Midget71 it is "supposed to" but thats if they ever finish the car over at that terrible shop.

[@ilikeboost4764]

mattybeatzkidd if you haven't used the shop don't call it terrible.

[@TomRxtroWav397]

Ilikeboost he right, they cant fix boost leak.

[@AndreLei1982]

Those Haggard shots... 😂

[@eamicorb]

AndreLei1982 😂😂😂😂😂😂😂

[@enjoisk69]

Lmfao 😂😂 Damien is doing everything he can to put in work on Haggard North, meanwhile Orion finds anything he can to put in an engine or around a wheel to get views. I really don't know or care what Orion is doing or smoking, Damien deserves the views in my opinion 👍

[@eamicorb]

4AGE Hachiroku Damien’s as shit as onion all he does is start a car for the whole video and talk about coil pack ... I think cam and the rest should start their own channel

[@lachdawg]

When were they? i seemed to have missed them

[@supitszach11]

Haggard is gone:/ lifeod shots fired

[@sfayer90]

Film it all man. This info is useful

[@zoldersnol]

i agree

[@jspeedracing]

Dang, that thing looks freaking sexy

[@HQBeats]

ikr!!! its crazy nice!

[@sethlong5538]

The car or Alberto

[@TheRealBleach]

Boosted Garage Nice supra

[@lordperezident]

Jon Drives Alberto or the engine?

[@jspeedracing]

Blanco Escondido Alberto of course

[@Holdeenio]

Adz, why have you not done a review/drive of the big boost mobil? Is it too much boost for you?? 😁 Please drive the E36?

[@im_pharaoh]

Reviews have never really been Adam's thing. I'm sure you can find footage of the E36 on Alberto's channel.

[@lordperezident]

S Holdeenio the real question is why hasnt Taylor Ray done a review on Alberto's in his words "E dirty six"

[@michaelfiorentino1294]

The RB25 is probably the nicest looking engine you ever build and put in a car ever because the red on the engine looks so good with the white engine bay, it is so rad and crazy lol, love the car and videos!!

[@Triippy]

1:03 Alberto: *Gives detailed description of car part* Adam: "Its pretty, so thats cool"

[@konamad]

Skyline, S13, S15, 350z, Nicole’s S14, truck and mustang, you really are living the dream Adam!

[@ifaz4029]

I’m expecting 2 step

[@josephbistran6941]

go over everything, no matter how slow or uninteresting of a topic, it will always be fun to watch.

[@jdmlover1084]

YAY S15 UPDATE!!!

[@karriebhurgari3933]

JDMLover not really

[@slammensam4068]

lol are you from the future? If so, has Despacito 2 come out yet?

[@jdmlover1084]

Slammensam he says it at the end of the video...

[@jdmlover1084]

Karrie Bhurgari ??

[@michaelrichardson8891]

JDMLover bout dam time

[@jamesmontgomery444]

I wish there was a love button for this video. The way these two put engines together and their friendship is awesome

[@billysmith5977]

Adam you should put a p.a. System in your drift cars so mid drift you can just yell at people 😋

[@SortaProfessional89]

Billy Smith gay! Smh

[@vincentgallegos1951]

That would be awesome😂

[@kevincerny2648]

Someone in a drift truck did that by us...trust me it's only funny the first few times haha

[@tjjarose3658]

Id like to see it all, some people may find it boring to watch but its very informative for people that like building their car.

[@danwellwood2627]

when hole sawing- start in reverse to prevent jumping, then switch to forward drive.

[@Havok412]

Can you make a video? Instructions were unclear, got dick stuck in hole.

[@Jbrundage94]

When I put the RB in my Subaru, I also had to go with solid motor mounts to prevent movement. I did the same coolant line loop as you’re doing as well. So far, so good. 👍🏼

[@iamrimmer9652]

Going in on onion 😂😂

[@lordperezident]

Iam rimmer for real. The more harsh the better lol not gonna lie onion is making some moves and literally leaving haggard in the dust. He's distancing himself from that brand and being a hack job. He's still a hack though as seen from his recent videos. "filling a car tire with water" etc.etc.lol

[@Tanner731]

hack shit gets clicks. onions just playing the youtube game

[@iamrimmer9652]

Blanco Escondido that shit is still pulling in like 1m views though. More than the whole of haggards youtube career 😂😂

[@e34boat88]

Tanner true and sad

[@levikeen3007]

Tanner man live-streamed for 12 hours lol

[@KompletterGeist]

Alberto has some mad welding skills. Those seems look absolutely beautiful!! Great job!

[@isaiah6548]

YAYYY whos excited for this RB? And also slightly nervous? Lol

[@jamescloudsdale4648]

exited yes, nervous no simply because he is overbuilding the shit out of it seeing that it will be capable of almost 200 more hp than he will be running it at.

[@lordperezident]

james cloudsdale that's always the best way to do it. Have it over built without actually running to it's limit

[@brycenntinsleyy3551]

Isaiah's Toúgh why would you be nervous for someone else’s build?

[@_Glockyy_]

Meeeeeeeee! #plzdontblowup

[@lordperezident]

Brycenn Tinsleyy that's what I was thinking lol it's not like it's his money

[@kentucky9976]

All of it, Lol. I’m completely rebuilding my s14. It’s the first time I’ve ever worked on a car aside from doing oil changes and spark plugs. A 90’s Nissan is a 90’s Nissan. The more I see the more I learn and the more it gives me the courage to actually fix it myself. It’s been literally just me doing everything all alone, so it takes a bit to build up the courage and go out there and just grind it out doing everything for the first time. I love learning about all the different ways I can continue to upgrade my car and start to plans things out, especially budget.

[@44ro.n]

loving the shots at life od and haggard lmao

[@jonwhitlock4683]

That shit was weak

[@enjoisk69]

Life od is weak

[@jonwhitlock4683]

4AGE Hachiroku Dont be a hater he’s doin it

[@pimhan]

To be honest I like to see everything on that list, because I still learn a lot of things from all your videos, no matter the subject!

[@brokeboysbuilders139]

Let’s see putting the rest of the exhaust on and hooking up everything else on the motor

[@nopenope843]

Harmonic balancer. You're in Rb world now bro, congratulations you have made it.

[@snape1464]

Andrew Hawkins (MotiveDVD) did a video saying 2 step shock loads the oil pump, so you might wan't to look into that

[@DKHazard]

@Adam LZ It's not about the clamping force, it's about the contact area, which is double that of a single disc of the same size, this allows it to spread the load.

[@TrivylinTech]

Did adam just mimic orion 😯 are they beefing 😯

[@natharnold3620]

Awesome to see more of Alberto on the channel again. That guy is a legend.

[@TheRealBleach]

Finally, an RB25! with an RB26 cover???

[@streetboyz1096]

The Real Bleach so is it the original rb25 from the car? Or rb26

[@hunterpurdon9118]

always make sure when you use a hole saw on metal you have a pilot bite centered in the hole saw. it will keep your whole were you want it and keep the hole saw cut straight

[@FTR401]

That meant Oreo joke was definitely lowkey joke towards haggard

[@justjack2581]

Highway boyz nothing low-key bro. He blatantly said “haggard Oreos”.

[@hugoveldkamp1997]

Loving the skyline build, in holland these cars are quite rare so its realy interesting to learn all the flaws of these engines true you video’s. I’d love to see a fully detaild Wiring video. Keep up the good work much love from The Netherlands.

[@nissanpacific9793]

Throw out that Mishimoto radiator cap!

[@Havok412]

Which cap would you recommend instead?

[@mirshah_911]

Greddy cusco mishimito does not work anyways

[@Havok412]

Milr Shah But why though? Do they not hold pressure? Cusco over Mishimoto? I just want to know why I shouldn't run one.

[@mirshah_911]

Read somewhere mishimoto sucks does not hold pressure on evo forums i think so do your search original japanese brands are better engineered then this

[@harrimannn]

Honestly, I just enjoy the way you do things. Keep filming and time lapsing when you need to, I enjoy it

[@OrrcoRacing]

I wasn’t to see... everything on the list 👌 I miss the in depth videos!

[@nathan2483]

Detail on EVERYTHING!!!! Always curious to see how others do engine swaps

[@Sauerbrew777]

Time lapse for the to-do list would be fine. Think you've shown most of that stuff on previous builds.

[@samlcyo2]

I think he wants to change it up.

[@tjmorgan726]

Consistant uploads is like having a new episode of one of your favorite shows everyday, super dope. I was out there in anaheim rep'n LZ gear !

[@Ivan-vf5sd]

I’d like to see the ac lines oil cooled & lines etc...

[@Darren240sx]

It's better to cap the heater hoses then to loop them. Looping the ports will flow hot coolant from the back of the block to the water pump inlet. It then goes back through the engine without going through the rad. Looping also carries a larger volume of hot coolant. Stock the heater core acts as a radiator for the loop and also restricts flow in the loop.

[@markgleason1369]

Throwing mad shade at haggard garage ?

[@Interestingfellow08]

Mark Gleason where did he do this?

[@Havok412]

Jonathon Prouse "MINT" "MINT BRO". Hardly shots but hey people on the internet are sensitive.

[@Interestingfellow08]

Kouki_Monster Yeah he’s just joking around hahah

[@justinwright54]

Will an rb run on oreos lol

[@theboostpig]

if you went with a 6boost manifold it pushes the turbo in front of the strut, fits super well

[@sleeper4life517]

Why did he even go for an RB25 instead of an RB26? (Sorry if he explained it already)

[@Roct3874]

sleeper4life The rb25 swap was already there from Japan.

[@lenny0347]

if you knew about any of the rb25det's then you wouldnt be asking that.

[@s-chassis123]

Fuel system, fab work and wiring! 🤙🏼🔥

[@boostaddict_]

Show everything but just quickly, not too much detail. That'd be best imo.

[@dylanfavro1637]

Coming out amazing. If you do solid mount try to move it up a little get your shift to work and turbo clearance. Good luck with everything

[@jordanscouten7652]

Nice RB it will rip

[@METALGEARZETTO]

Fuel lines!!! And everything you’re doing for the fuel system. I think it’s very important to do fuel delivery correctly.

[@rahwand]

please go in depth with the wiring and ac stuff

[@killacovertops]

Fab new motor mounts and use the trans mount position as a reference to get clearance for the turbo to save from rubbing against the bay

[@lukefriend1]

Is this tommyfyeah?

[@AdammP]

Luke Friend lol I just noticed he posted a similar shot of his rb26 on the thumb haha

[@samlcyo2]

lol, no way, Tommy wouldn't have even tried to cut the engine cover like that. I'm glad Adam had the balls though :) Live and learn.

[@CarswithNash]

Engines pull to the right under load, that turbo should be fine if you clearance that washer a little, it will gain clearance as it pulls under load.

[@Sir.VicsMasher]

Good luck defogging the windshield without a heater.

[@shona5512]

TurboDieselDan lol you get fog when it's humid inside the car and the windshield is cold.. But they're in Florida and the sun is always beating down on the windshield so it's rarely ever going to be cold. I doubt he'll have many fogging issues.

[@mrkouki180sx]

it rains ALOT in florida

[@nickmac5953]

I lived in Florida and sometimes the heat worked way faster, the ac would just make it worse. Not sure why...

[@woodsy900]

Nah bang on the AC she'll be right

[@DriftNick]

Being able to see out the windows is overrated.

[@bmxstar14]

100% okay with the timelapses and such. cool seeing all the little work you guys put into these builds nomatter what it is. stoked to see this thing shred. and btw. merch idea, something pedal pressure related? can correspond with drifting and the bmx roots too. just a random thought i had the other day, figured you might have a cool spin on it for a shirt or something

[@LEWZR]

Make the r32 a super clean drift car (not a missile) and turn the cream hatch into a stanced out show car

[@KasamS]

LEWZR its a drift car it'll never ve clean but adam always tries to keep his cars as clean as possible

[@LEWZR]

Kasam I know but he said he's gonna use the skyline as a missile car which will suck cuz I don't wanna see him denting and scratching it up every event he takes it to

[@KasamS]

LEWZR the 350 is a missile car but its still pretty clean

[@LEWZR]

Kasam good point, I'll just have to wait and see, hopefully he falls in love with the skyline and doesn't put it on every door while drifting

[@macberry4048]

The way he always mentions keeping AC, it seems like he wants the skyline to be mostly a street car

[@EdVoigt1]

STOKED TO SEE TWIN EXTERNAL WASTEGATES.. sweet clutch too, gonna be sick when she's running

[@ColinMcEvoy]

TORQUE MEEEEEEEEEEEEEEEE

[@legomeeggo1164]

i say record whatever you want, it’s always entertaining watching you

[@Itsme-sr8rp]

Rb26

[@matevznovak5040]

Takumi Fujiwara they changed covers

[@ProMotoo]

It is an rb25

[@Spooky4815]

You are still missing an essential element

[@SortaProfessional89]

RB25.6

[@Incenitivity]

Takumi Fujiwara , drift king.. is that you?

[@nickmac5953]

Motor mounts, extending the shifter and extending the tail pipe. As you went through the video those were the future items that I wanted to see worked out. Thanx

[@SpeedCultureStudios]

You ever plan on heading back to NC to run the dragon? Bring a car or two through Greenville SC and stop at Michelin HQ on the last Saturday of any month for Cars and Coffee. Has to be one of the biggest Cars and Coffee events in the country. Excellent turnout every month with some awesome cars and bikes of all kinds. It’d be pretty awesome to have you hang out!

[@MichaelBacon212]

I know some people would like to see the trans mounting fab you guys do and the intake manifold also.

[@2057ram]

Cool I've been loving the R32 build I love seeing that beautiful RB25 and also today I saw a blue R34 GTR around Temecula Valley California man I want one

[@painy21]

We want to see al of it! That’s why we are here bro!

[@ShadeTreeGarage]

we like all of it! stoked to do this stuff to my new build! Keep it up Adam and Alberto!

[@ghettoflyer]

I would encourage Adam to use a beefier transmission mount. Ideally some boxed tubing or round tubing with flat plate mounting points. I encourage you guys to look at transmission cross member on the Mustang (similar unibody car and mounting system and horse power) A weak transmission mount (with all due respect for who ever made that for you) can cause all kinds of troubles down the line, because the drive train is not staying properly aligned, (drifting is very abusive on drive tran parts) this can lead to breaking u joints, drive shafts, motor mounts, and even transmissions themselves. Please reconsider using that mount or one similar (that is simply made out of flat bar stock) I would encourage you to look at any number of RWD domestics for inspiration. Thanks for hearing me out.

[@FahreFilms]

Can`t wait too see this beast drifting again!

[@yomamarager2179]

You have a good partner man he did solid work for you props to him

[@elliotjohnson1885]

I want to see the vacuum lines done in detail, learning more about what they’re for and how they work would be sick

[@BuildRacePartyOffical]

Can't wait for the s15 footage! That chassis already looks amazing

[@Diabolical-Tyrant]

You should grind down the 6 on the RB26DETT to look like rb25, love the engine looks beautiful

[@tannergreytak6743]

Would love to see the details of wiring/setting up the ecumaster! One on my top 3 choices that I've been considering.

[@13TCross]

Go into detail on wiring what gets kept and what gets deleted from the engine harness as well as the chassis harness.

[@coryvaldez8543]

battery mount and wiring, the valve cover, do you mean like running lines for the catch can? Mounting the mani, dump tubes then the oil cooler stuff. Very interested for these things :)

[@alanball3200]

Personally I say film it all the info is a great help to myself and everyone who enjoys working on their cars and may not know everything about a particular set of parts or alternate ways to go about making the system work by changing a few parts to accomplish the same goal

[@STINKYPOOPOO42069]

A 1-2 minute segment on turbo lines & dump tubes would be awesome

[@marcotassone2324]

Id really like to see the oil cooler set up in detail!! People don't really realize how important oil cooling is for Drifting.

[@JesusGarcia-hw4bo]

Go into detail on fabbing up the trans to fit and lineup with the mounting points and stuff

[@weston1211]

I think it would be cool to see what you guys have planned for the Fuel system! Fuel lines! Regulator!

[@elliottgillespie1579]

Definately want to see the power steering lines and Wiring also! Shout out from Australia from a fellow Rb25 powered, R32 owner!

[@thatoneguy7566]

These are my favorite type of videos is you and big boost💪🏻

[@philipsaylor2384]

Adam just flim everything you do, I enjoy watching all the different builds

[@SteffanTankClausen]

One massive detailed video would be rad as hell! Excited to hear the car rip. :) But fuel system would be cool

[@iCorpius]

I want to see as much as possible in detail, i not only look to these videos for entertainment but for also learning. i think its fucking cool when stuff is explained and i can really understand why and whats going on!!

[@davidgucchii]

You should divert the dump pipes into the exhaust! HUGE 🔥

[@tonyg8637]

turbo lines and all wiring. Love the videos. I watch every one of them lol

[@e34boat88]

you are so lucky to have dude like Alberto as friend and mechanic

[@lockstop1051]

it might not look good but you can space up the coil pack cover to get rid of heat

[@Th3MaskedDj]

So awesome!!!! Grewt work and what a legend alberto great welds

[@brandonsimeone7526]

Beautiful!! Can’t wait for you to be sideways with this thing and use It as you intend to! I say just show us everything left on the R32 because there is no such thing as bad content. The internet can always move on to the next video if they don’t want to see It.

[@lucasbledsoe3623]

Honestly I would really like to see some detail on wiring especially if you guys are going to do any form of wire tucking. Thanks, and keep up the good work.

[@BustaCap]

I wish I had a project car 😢 I think you’re doing a really good job with the filming. Anything to do with that gorgeous car is interesting!

[@GoVIT4L]

Film everything, it’s all handy! It’s all cool to watch and helps a lot :)

[@EdVoigt1]

Im looking forward to seeing your FUEL setup (lines + FPR + rail & injectors -gotta feed that beast) as well as wiring (how fancy are you guys getting? deutsch connectors + raychem #motorsportswiring).. How are you gonna run your vacuum lines (interested in seeing how you'll boost control with stand alone and the sexy twin wastegates) -Also hell why not show how you're running your oil lines with the cooler + relocated filter + sensors(?) real quick while you're at it. Awesome stuff, Stoked to see Alberto's fab work ..ya'll keep it up!

[@Austin152-S]

I wonder if you should plug those heater core coolant lines so that it is not taking Hot coolant from the back of the head to the waterpump. I know that it is best to plug them on Datsun L28's vs looping it.

[@pretendracingcars8028]

For the dump pipe coudnt you just have 1 out the bonnet and one pointing to the ground?

[@ParadoxdesignsOrg]

I've never been a fan of RB's but holy sheet, I'd rock one built by Big Boost any day of the week!

[@Lowcoupe]

I wanna see everything! Drift car builds are the best