Рет қаралды 3,441
This isn't clickbait, I really think this is the BEST and EASIEST watering system idea for rabbits or any other small animals that you might keep in a small contained area. It's easy to set up, once you have the right parts, and after that, it is very low maintenance. The most expensive part of the build was the tank itself, but it is considered a "specialty" item. The rest of it, I already had on hand because of previous build attempts. If you have any questions for me regarding this build, please leave them for me in the comments section and I will get back to you. Thank you for watching!
A listing of the parts that I used in the build:
35 Gallon Leg Tank (Main Reservoir) (Got mine from Rural King) (Probably can get from any farm supply)
1" Threaded Outside x Slip Fit Inside Male Adaptor (Goes inside the drain bung of tank to attach to PVC)
1" to 3/4" Slip Fit Bushing (Goes inside the 1" adapter)
3/4" Schedule 40 PVC (as needed for supply and distribution)
3/4" Elbows (as needed)
3/4" Tees (as needed)
3/4" x 1/2" Tees (as needed for supply to individual cages)
3/4" slip fit coupling x Female water hose (only if you are going to use a water hose to fill the tank)
3/4" Couplings (as needed)
1/2" Thread x 1/4" Barb OR 1/2" Threaded x 3/8" OD Sharkbite (as needed) (goes inside 1/2" tees)
1/4" ID 3/8" OD Vinyl Tubing (as needed to connect from barbs or sharkbite to cages)
A/C Duct Strapping (for support of the PVC pipe as needed)