Race Carburetor vs. Street Vacuum Secondary: What's the Difference?

  Рет қаралды 2,203

TPV Productions

TPV Productions

Күн бұрын

Пікірлер: 12
@jimandskittum
@jimandskittum 5 ай бұрын
A hundred years ago I ran a 750 vac secondary with a tiny spring and the check ball removed. I had a light on my cowl that came on when a contact touched the secondary linkage when it was wide open.
@TPVPRO
@TPVPRO 5 ай бұрын
@@jimandskittum lol nice kinda like a ok we all in light.
@jimandskittum
@jimandskittum 5 ай бұрын
@@TPVPRO Exactly. There isn't any way to know if and when the secondaries are all the way open without an indicator.
@Scurvyraceworxs
@Scurvyraceworxs 5 ай бұрын
Great video as always bro
@wreckanchor
@wreckanchor 5 ай бұрын
Whats up Tyler. I just got my Karl Ellwein 383 in my 92 S10. Breaking in the engine then headed to the track for some test & tune.
@TPVPRO
@TPVPRO 5 ай бұрын
Is it a gen1 or 2?
@wreckanchor
@wreckanchor 5 ай бұрын
@@TPVPRO Was originally an early ZZ4 Crate engine w/ early factory roller block and 1 piece rear main. I had Karl rebuild it as a 383. All forged & balanced rotating assembly, 11:1 compression, AFR heads. Its roughly a 500 hp 500 tq . Build. He built a 406 for me a few years ago and you were there for the dyno run. I liked the 406 so much I asked him to build this 383 for my S10 I plan to drive on the street and also do some weekend bracket racing maybe. I have the 383 mated to a Hughes 3000 stall conv. TH400, and Ford 8.8 rear with Caltracs and Drag radials. Still breaking in the engine but the truck feels really strong.
@billdavis3735
@billdavis3735 4 ай бұрын
4150 w/out a choke, when I first fire it up AFR is 16.5-17 after engine warms up goes to 14.2. Is this a normal AFR for start up?
@ativvafoxx5617
@ativvafoxx5617 5 ай бұрын
Is it safe to swap between 85 carb and a carb for pump gas? Sorry still learning all this
@TPVPRO
@TPVPRO 4 ай бұрын
You need to upgrade your fuel system to PTFE fuel lines E85 pump and a plastic fuel cell without foam in it. Even the carb fuel lines need to be PTFE. If you do all that you won't have an issue. Just don't let the fuel sit for over a couple of weeks. Plus you need to have all the gas out the system when you swap to E85 because it needs 30% more fuel than gas. Only EFI with the flex fuel system can you mix the two.
@ativvafoxx5617
@ativvafoxx5617 4 ай бұрын
@@TPVPRO Thank you good sir!
The New Edelbrock VRS-4150 Carburetor - Full Review!
31:00
Muscle Car Solutions
Рет қаралды 213 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Flatplane vs Crossplane - Which Is Best?
7:11
Ft-share International
Рет қаралды 34 М.
Weber DCOE tuning ,  Part 1  -  Idle and Progression -
30:10
D3Sshooter
Рет қаралды 86 М.
Carburetor Confusion! What's the Best Setup? | Engine Masters | MotorTrend
9:29
No Substitute For A Timing Light | Fundamentals Explained
26:20
Salter Racing Engines
Рет қаралды 20 М.
6 Weird and Random Edelbrock Carburetor Problems
13:30
Muscle Car Solutions
Рет қаралды 104 М.
How to Balance & Tune Twin Weber DCOE Carburetors | Tech Tip 18
15:32
How carb jetting works | Offroad Engineered
6:29
Steps to Podium
Рет қаралды 446 М.
Power Valves Explained: How they work, how to tune
21:16
Muscle Car Solutions
Рет қаралды 147 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН