Racing The FASTEST 3D Printer

[@MorleyKert]

Go to expressvpn.com/morleykert and find out how you can get 3 months of ExpressVPN free!

[@daliasprints9798]

I love how your sponsored vpn segment covered the only actual legitimate use of vpn providers rather than the usual false privacy claims they advertise.

[@garagemonkeysan]

Great video, such a clever story idea. You weren't just racing the printer, you were risking your life! Genius. Mahalo for sharing! : )

[@MisterDeets]

They make a roughly 7mm or 1/4" thick silicone foam pad for heat transfer that you can order off Amazon for about $26. You can cut it to size and glue it to the feet of the Bambu. It should greatly reduce the noise without adding significant height or combustible materials in case something goes terribly wrong. I love that stuff.

[@JesperMakes]

This is actually a very good video. I loved the race and the printer demo.

[@MorleyKert]

Thanks, Jesper!

[@EpicVideos2]

I purchased the A1 3D printer, and because of the black friday sale on right now, it was just $299. The print quality is perfect. The speed is the same as X1C, as in super fast especially with sport mode (which you should have tried!). The ease of use is amazing (wifi capabilities, auto bed leveling, filament failiure detection). And it has an incredible powerful slicer and maker world community. I can't recommend it enough for people who saw this video and were turned off by the price. You can get the AMS version for only $449, which I wish I had because the things you can make with it on maker world look so fun.

[@cadenc2360]

Fantastic Video as always Morley! It was so cool to see your family and how much they love and support your 3D printing. It was an awesome concept racing the printer, and I can't wait to see all the things you make with the Bamboo X1 Carbon; please make more videos on this printer as I have been debating buying one for a while and am on the fence. I want the MK3S+ or the Bamboo, and your videos are obviously perfect for the comparison! Thanks for all you do and your hard work on these videos. We absolutely love them!

[@BeefIngot]

Thoughts on this video (I too own one of these but gave them a chunk out of my wallet): 1. About the Corexy explanation at the start of the video, Im sure you wanted to keep it simple, but I will just note that there are other types of printers which arent CoreXY where the head moves in the x and y. Things like H-Bots, Deltas, and Cartesians even. Something like the Ender 5 for instance, while it will be slightly faster than a bed slinger, will still drag around the X axis motor with the head making it significantly slower than a CoreXY or HBot design. Thats the real benefit here: Not dragging around a heavy stepper motor. Of course this isnt really a criticism, just adding information because I've seen a lot of people buy ender 5s thinking they were getting magically fast printers when they arent. 2. Whenever you do build the table mentioned, you want to make it really sturdy so that the resonance compensation gets the best values possible and you get the best speeds possible. The stiffer the platform, the better the results. This isnt Bambu specific this is also true for any printer that runs resonance compensation (in klipper this is called input shaper for instance). 3. I like this printer and it really is the future, and I actually feel like I got my moneys worth and recommend it but it is loud. A huge part of that is fast things make noise, and thats unavoidable, but it also doesnt have silent steppers. Its not like it is so loud that youll hear it in a different room ,but worth mentioning. I imagine they did this because they figured it'd be loud anyways and wanted to cost cut somewhat given that this thing has the performance of a voron for half the price. 4. There is a great video on the small channel 75echo about reducing waste with the AMS that might interest you. 5. At 9:40, a moment of silence for the horrible car centricity we have in most of North America. Straight up no place for actual people to cross. You're expected to just have a car. 6. About the price, I actually think it's cheaper than a prusa when you compare everything similar. The prusa fully assembled is 1099, the X1 is 999. Then at the lower end the kit is 799, but the Bambulab P1P is 699. Then you consider that at each price tier you are getting a lot more for your money and the mk3s starts looking quite dated/inline for a price decrease.

[@Orangeking05]

was about to comment this lmao

[@thomasclaffey3363]

10/10 video! fun idea, best objective free stuff warning, and even a parents cameo. Cheers bud, give your parents my best

[@thomasclaffey3363]

Oh yeah also, I want a sponge hammock of course

[@MorleyKert]

Thanks man! I will print you a sponge hammock the next time I see you 😊

[@JayQuinlan]

Try printing some TPU feet - I had the same problem with vibration and this seemed to help. The X1 carbon is awesome

[@FixitFingers]

Nice work Morley, 'I got free stuff' videos are tricky to make interesting, you've done well!

[@AndrewSzeto]

LET'S GO! Way to go bambu lab! Good looking out!

[@Esatsana]

Yes finally !!!!! You finally got it 🎉🎉🎉

[@AndrewSzeto]

love the urgency of the race! haha sooo good! also loved that audio change at the store! haha

[@kiliankoe]

The X1C is what got me into 3D printing, I've been watching your videos since getting it like two months ago. I'm so happy you got it as well! It's a fantastic machine. A few tips though: Print PLA with an open door or top cover, I've had two clogs thanks to heat creep when keeping it closed. Get the textured PEI sheet, it makes everything better and you won't have to use glue anymore. And lastly, modify the gcode in the filament profile to not turn on the exhaust fan for PLA. It's not necessary (especially when keeping the enclosure open) and it makes the printer soooo much quieter. Also, for those looking for something comparable but cheaper, BambuLab just announced the P1P, which is basically a scaled down version of the X1C that's more easily customized as well. And it costs around half of the X1C+AMS combo.

[@MorleyKert]

Awesome, thanks for the tips!

[@Effect2o]

I have been looking at the x1 Carbon for a while, and between you and itsboyinspace, Im SOLD on this printer! Time to save up and finally be cool like you all! 👊

[@TheJttv]

Try putting the printer on a thick NBR foam yoga mat. It might cut down on some of the noise. I have found that printers there are 3 sources of noise, the motors, the fans and the printer vibrating on the table. The mat helps the third. You can add sound dampening on the inside if you wanted too

[@LisaHarsh]

You will love this printer. Mine has been going non stop since I got it. Yes there are some fails, nothing is perfect. I’ve had to take apart the extruder to clear it once. But dange prints are nice and the fact I can print ABS without issues makes me happy. Also get a PEI textured sheet. The stickers are horrible. I went through three in four days. PETG ripped them. Bought mine off Aliexpress from energetic

[@MakewithJake]

Awesome video man! Really digging this new direction (pretty sure ive said that before...). Keep it going!

[@MorleyKert]

Thank you so much!

[@TuaMaeGosta]

Didn't know there was a Loki variant in my universe that was into 3D printing stuff, great video dude!

[@gltovar]

As Bamboo gets more popular I do wish prominent community members would raise awareness for open source projects like the Voron. A lot of the progress we have today in 3d printing we owe to the amazing open source community surrounding FDM printing. The Carbon is a fantastic machine, especially for how pick up and play it is, but the more market share closed source machines with proprietary parts gain, the closer we inch towards the consumer grade MSLA resin printer market full off proprietary hardware, subscription software, encrypted slice files, and other practices that stifle open source benefits for the community.

[@MakewithJake]

Very true, but a machine like the Voron project is not very approachable by users not already familiar with 3D printing - much less mechanical builds at all. I think it is amazing what the open source community has created in the FDM and resin world, but it is somewhat inevitable that we will see more and more proprietary hardware that aims to reduce complexity in order accommodate the vast majority of non technical consumers.

[@LayerbyLayer-P1S]

great video i have the p1s the one like it but a little less niche

[@marsgizmo]

great choice in the X1 Carbon! 👏😎

[@JoesWorkbench]

Great video, that printer looks awesome definitely a step above current printers 😍

[@schizophrenicgaming365]

at 10:11 that church across the street from a cemetary on a 2 lane road going from an interchange to a suburb looks identical to a road in my hometown. what city is that?

[@schizophrenicgaming365]

hold on a minute is that orillia?

[@Linuxdirk]

THIS is what I call a modern 3D printer! I wonder if they will be able to reduce noise and vibration in the future.

[@Emily-fm7pt]

I feel like at a certain point we’re hitting physical limits, like there’s only so much you can do at those speeds to dampen vibration / noise

[@JimmMmmMmmMmmMmmMmmmmmmmmmm]

Thanks for wearing a helmet!!

[@Davids3DProjects]

Put a patio paver brick underneath to help lower the vibration.

[@XxiMcRAzYLaZyxX]

Mines coming today, still have a bit of time to use it to print toys for tots 👌

[@spideyprince7077]

Wanted to order one, but its not out yet? And why did you closed the pri ter wile printing pla? It should have air flow so its not getting warm inside?

[@AndrewHelgeCox]

You might want to keep it on a concrete block resting on rubber/dense foam. Should damp some of the vibrations.

[@RobNisters]

There is a GitHub pace that creates a printer profile that only prints the front purge line, saving more time ( I damaged the right-back cornw of my cool plate sticler, so removing the back right purge line became a struggle) And you could have used the "sports" or "ludicrous" printing mode to gain more time

[@Jokershadow696]

Speed is important but the most important part of any 3d printer is to be able to fix anything that is broken and/or replace nozzle etc, bambu labs printers lacking in that heavily. You almost need to buy new one if something stopped working. As soon their printers would be easy to maintance and even modular - they will conquer the 3d printing world.

[@AndrewSzeto]

cathy kert cameo finally! haha

[@HappyLooter]

Awesome video!

[@jeremyspecce]

I guess you could also say if you were comparing apples to apples you'd also have to include the file loading time and designing or downloading time, etc. That being said, it looks like a real step up with a lot of great features right out of the box, and because i've been considering upgrading to a Prusa eventually, this is now a serious contender, whereas before it was really just one choice.

[@krcj1302]

For the FIFA fans , may you 3D-print the FIFA trophy.

[@JosiGold1]

I bike in the city a lot and i am used to cars being around but the shear courage of one wheeling across those long stroads is different than city traffic, kinda scary....

[@odj310388]

Love this video, such a great idea for how to show the speed with a real world example. I've had a X1C for a while now as I was an early kickstarter backer. I use the bed levelling on every print as found the z height seems to vary every so slightly and sometimes hurt bed adhesion on the first layer if you don't have it enabled. But flow calibration? Never use it now as I don't think its worth the extra time at the start.

[@kiliankoe]

I like using the flow calibration when printing random different filaments with the generic profiles. But for those filaments I print a lot with I have separate profiles saved where I manually set the flow ratio after some tests, running the calibration on that probably won't help much.

[@CoolAsFreya]

I wonder how much the vibrations would be affected on the 3D printed repairs trolley

[@photelegy]

❓ Have you heard of the "Snapmaker J1"? They just started shipping them out. And it's a fully IDEX printer with high speeds. Wpuld love to see you checking it out. 😉👍🏻

[@icommaDK]

This might've finally sold me on the S1 Carbon...

[@ocota831]

How do we bypass the 7 min calibration every print?

[@EvilSpyBoy]

(I have 2 of them) Also Mum had a tool for her sewing machine that broke (the handle) so I made the part in Fusion360 and went through maybe a dozen iterations (its a small intricate part) ANYWAY I always think I should use parameters but always forget. This time I remembered your video where you were doing it as you went and I actually remembered this time.... just have to improve my naming convention

[@mac2708]

Hey dude, cool stuff happens to cool people 🤙

[@ninjawithfishontheback]

awsome vid instantly subbed

[@froquede]

i didn't knew Atlanta was available on Netflix here in Brazil lol

[@TitoSabbyPH]

Awesome!

[@BrighamCooper]

Love my Bambu. Though I would honestly look at getting their pei plate. The cool plate sticks super well but I still prefer the way pei releases

[@MorleyKert]

Definitely gonna pick up the PEI plate!

[@Sambosis1]

You can get an even faster printer now like the svo8 for a third the price

[@theon2k]

what about that print which failed while you were at the store? ;) And btw, maybe driver "did not see you" because with that monowheel you move too fast as for the pedestrian?

[@fookingsog]

@Morley Kert Way to go on the printer!!! You deserve it!!!😁👍🏻 I've got the Ender 6 which is also a CoreXY configuration!!! Good Stuff!!! What is your hotend temperature for that high speed?... and your mm/sec print speed? Around the $1400 mark for a fast printer and multi-material change is NOT a bad price!!!

[@morbus5726]

the bambu x1 goes to 300c, has a max printing speed of 500mm/s at 20k acceleration.

[@petiocskos]

Was this printed on stock settings? There is a "Ludicrous Mode" setting in the printer that might beat you :)

[@MorleyKert]

Yep, stock settings

[@Me-kw1ct]

Get yourself a WhamBam Pex plate, you wont ever go back to the original buiild sheets

[@tatyboy1337]

very cool video 😁😁😁😁

[@jimmyscott5144]

I would love to see how the slicer compares. Isn't it all proprietary?

[@MorleyKert]

The slicer is great! Very easy and intuitive

[@Sam-dn7jk]

Great video! How would you compare the print quality to your prusa?

[@MorleyKert]

Thank you! Print quality seems at least as good as the Prusa

[@1944chevytruck]

cool machine!

[@Justinianplayz]

Do you live in Toronto or British Columbia Vancouver

[@Teachers-Pet]

10:26 I wish I did too

[@dirediredude]

Haha love it. Remember you also risked your life multiple times, had to deal with the stress of shopping, and had to pay probably 10 times the cost of the raw filament you used printing 😁 Pls if you stay home while that's printing you can do something else in that 40 min. Design something else, do laundry, watch cartoons. Anything 😁

[@BarfusWOW]

Oh look someone else that got a free Bambu...

[@harleyhiebert2862]

They are so bad that they have to give them away

[@Esatsana]

Why are u saying that ? I don’t Know what printer buy ?

[@morbus5726]

@@harleyhiebert2862 someone's jealous ;)

[@MeltedDreams-fr]

Ok so bambulab. Everyone talks about it. Everyone says it’s the best printer. But the reason I would not pick ANY of bambulab printers is because of their IMPOSSIBLY HARD CPNSTRUCTION. I mean 1 Z acsis rail?! How is this even possible this thing gonna being offset when I add pressure to it! Reality is better printer because it’s not that complex. Install and ready to go. With everything calibrated (if the printer is YX core) or very VERY upgradable.

[@MeltedDreams-fr]

No I wasn’t completely talking about this printer. But all others. + multi colour filament.. it’s more mess around the house

[@CopyLion]

You can tell from the benchy it still isn't perfect, some globs near the lower half of the door and some uneven layers too, but it really depends on how fast you are printing at and worth the trade off or not

[@CopyLion]

Also 9:27 that obviously failed to stick to the bed

[@fookingsog]

0.16 vs 0.20 layer height makes a noticeable difference, especially when overhangs are involved!!!

[@BeefIngot]

Its probably the stock sliced 17 minute benchy

[@sonniberg970]

Great video once again! That hammock is so cool! Could you please share it with us? :)

[@MorleyKert]

Thank you! The file is linked in the description

[@sonniberg970]

@@MorleyKert oh my mistake, I'm blind 😅😂 thanks 🎉

[@NinaThoren]

Oh wow, this printer seems super cool! I have been looking at a few different printers when I have the money to buy one and this seems amazing! I don't know how much you have used it but would you recommend it to a first time user for starting 3D printing?

[@MorleyKert]

I would definitely recommend it to a beginner! Very user friendly and minimal tinkering (at least so far)

[@NinaThoren]

@@MorleyKert Just looked at the price and might have to save up a bit more than I was planning but it seems to be worth it with how clean the prints are and how fast it is. Great video!

[@jtktam]

i just wipe the plate with windex.. cuts down on how sticky it gets

[@ethanjohnston8644]

Get a high temp pei sheet. No glue stick required :)

[@stealtheo]

Use hairspray instead of the glue stick Aquanet is the brand everyone recommends

[@josephknowlton7246]

Liked, shared and commenting. Great vid. Nice choice of content. Race the bot. I also like how u just whip round town on the 1 wheel. I wonder how much of a pain that is being battery. Does it ever die mid trip? Does it take all nite to charge? Do u need multiple battery n always b charging one? I got questions lol.😂🍻

[@MorleyKert]

Thank you! Nope, the onewheel GT has a huge battery and range

[@chepe263]

I used to have a (regular) printer in the office that shook so much that we named it "the porno printer".

[@Jesus166]

I want one ,too bad it's too expensive for me to get at the moment

[@LilApe]

For those who actually want a bambu, don't waste your money on the X1. It's like a $300 markup over their new model just for the lidar, which is 100% unnecessary. You can literally tape over the lidar sensor and it makes zero difference. And bambu is silent on feedback about the lidar. Spaghetti detection is a gimmick and doesn't even work, lidar is a gimmick and makes zero difference to the calibration or print. Auto flow calibration is also a gimmick and nobody uses it. 1st layer calibration is pointless. You can literally print the calibration flow lines, peel the lines off and the sensor will just pick a line that doesn't exist. When people do their prints on their X1, they turn off the flow calibration, they turn off the 1st layer inspection, and they tun off the vibration calibration. Basically everything that uses the lidar, they turn off. Meaning they spent and extra $300 for a sensor that nobody uses.

[@JustTechGuyThings]

It's not "compare CoreXY and Cartesian", it's more of "CoreXY versus Bed Slingers"

[@thediscman123]

hi i dont use glue stick i use 3DLac it works great.

[@AndrewHelgeCox]

I guess this format is part of your growth as a videographer, putting a whole story with drama and jeopardy into it. Also inspired by that famous mainstream youtuber you referenced on a recent CLAMP podcast. Throw in an ad read in the middle and there's not much for your core audience of people interested in making things to hang on to. It'll probably work out for you. The title and thumb I saw seemed a bit random though. Didn't get how you were racing or why I should care. The only thing making me click was hearing another opinion on the X1.

[@pauljones9150]

Now do a speedtest of a benchy on it

[@karasekjh]

You should have included time to search for the 3D model.

[@myithspa25]

10:45 Watch says: 58 He says: 28 Hmmmmm

[@darren990]

super video

[@MorleyKert]

Thank you!

[@fungchaksum]

vorons crying in the corner

[@Ianimategoofycharacters]

Isn't it a better learning experience if you have to build it yourself?

[@pandusdog6307]

damn it is 33 000 czech crowns i have only like 11 000 becose im 14 so I don't make like max 500 a week on sundays so i will need to get money somewhere becose that printer is frikin cool

[@foam27]

Dat V400 tho.

[@pauljones9150]

Do a speedtest benchy short KZbin video

[@NiveythaWaran]

never been this early to a video

[@MorleyKert]

What's up!

[@kahveciderin]

same

[@bradthompson128]

Nice, just finished John Malecki’s video about you and yours was up!

[@joelrobles9092]

Not cooler than you. You beautiful intelligent man. Thank you for sharing your amazing videos. Very informative..

[@AlexAlex-bh8fi]

The vzbot vz330 its crazy more faster

[@simlafpv8100]

i think the pla might deform when you would take a hot shower

[@daliasprints9798]

If your shower is hot enough to soften PLA you'd be in the ER.

[@daliasprints9798]

@@dtylerb 48°C is about the hottest that's bearable to most people, and 60°C is seriously scalding.

[@jim_babwee]

Why you so cute bro

[@thatcanadianguy3327]

bruh this machine looks like it costs 1k and ur a toronto nerd so mark that up another grand

[@BarfusWOW]

yeah it's around a grand US ... but since every youtube 3d printer channel has one... i wonder if the friggen company even MAKES money..

[@BeefIngot]

Im also in Canada, and it doesnt cost _that_ much more even though our dollar is not the greatest at the moment. In canada its 1219 or 1459, so pretty close to dollar conversion (actually slightly better in some cases). I bought mine for notably less than 2k CAD with the bundle

[@thatcanadianguy3327]

@@BarfusWOW they do, they send units to content creators to promote more sales its worth it for them because even if 1% of Morleys audience buys one that is still 23k they are making they also likely paid money on top of sending him a free unit gotta be ware of what ytbers say about sponsored products

[@thatcanadianguy3327]

@@BeefIngot modded my ender 3 for like 300 with tax metal extruder flex plates auto level kit sure time is important but until i see some side by sides its hard to justify spending over a grand

[@BeefIngot]

@@thatcanadianguy3327 What you are missing is your time tinkering with crap, modding things, tuning things etc. You don't do any of that here. Believe me, I have a modded to hell big cheap bed slinger running klipper, direct drive, custom motherboard, accelerometers etc. This is sooooo much more pleasant to use, and I didn't waste double digit hours of my life and 700 bucks on mods to get there. Yes, my printer is cheaper for a larger build volume, but not that much and it's actually more expensive if I pay myself for the time spent messing with it.

[@witness1013]

Not anywhere near the 'fastest' , where did you hear that B.S. ? Their marketing team and your free printer must have warped reality.

[@morbus5726]

it's the fastest out of the box machine under like $10000. Sure, a ratrig or hevort is going to be faster, but those requires hours of assembly.

[@BeefIngot]

This is by far the fastest machine you can buy. It is also literally faster than vorons, which are known for being fast. Sure a custom Vzbot will be faster, but you cant buy that, you build that. 247printing has an in depth comparison of the Bambu vs Vorons if you dont believe me and want concrete evidence.

[@morbus5726]

@@BeefIngot well that's not exactly true. A voron with a rapido hotend can be much faster, and by faster, I mean in terms of volumetric flow. The big limiter on the bambu lab printer is the hotend. It can flow around 30mm^3/s of material, while the rapido (a common hotend on DIY printers), can flow up to 70mm^3/s. The bambu is hands down the fastest out of the box printer though.

[@daliasprints9798]

It may be the fastest you can buy fully assembled for under 10 grand, but it's nowhere near as fast as the Annex machines you can build for a few thousand and that are open source and use widely available parts from existing ecosystems.

[@daliasprints9798]

You can also make a $150 Ender 3 go faster than the print in this video for about $150-200 in upgrades. But the Bambu could easily go 3-4x as fast as shown here with minimal or no loss in quality.

[@newchapterjesse]

You know with your wisdom on making new furniture stuff with wood im surprise you haven't made your own stuff and put it towards your studio.

[@mac2708]

P.S. I just noticed the infamous bolt cutters on the wall....epic show of vengeance my friend 🙏🤣🚲⛓️🪓

[@MorleyKert]

Haha thank you!