Is your steering rack leaking badly? In this video, I will show you the necessary steps, tools and procedures required to replace the rack and pinion steering system on a 90-93 Honda Accord CB7 CB9.
Пікірлер: 35
@anytimeminutes39925 күн бұрын
Great video !!! Also love the engine swap on that beast . Such a clean swap nice cb7 bro.
@Sk8orDieWorldWide2 жыл бұрын
Thank you for tackling this job. mine is due for another rack soon and it's awesome to be able to have quality videos like this as reference.
@mikhailportillo3873 Жыл бұрын
i got a quote for 220 on the rack and pinion and 250 for installation but this vid makes it look easy so i might just tackle this job myself and save myself 250 lol 😂
@Too_Baked Жыл бұрын
Helps so much can't wait to do start on mine !!92 accord
@Canongang2 жыл бұрын
Beautiful I need to do this too, I like the USA company support 👌🏽
@soarer209 Жыл бұрын
with this video i feel pretty confident thankyou brother
@80s90sfan5 ай бұрын
My guy...ur video was IMO very detailed, so much so, that even a neanderthal like me understood it!!! Thank u much!!!
@SleeperHonda2 жыл бұрын
hell yeah thanks dude
@excaliburO22 жыл бұрын
I too installed a Detroit axle steering rack. Unfortunately the gray paint they use does not last. Next time I will for sure paint it.
@Bigwil2k62 жыл бұрын
Great video!!!! I removed the cover for the lines and was met with serious rust on fittings. Tried loosening fittings and the lines twisted till they broke off. Lines are discontinued. What can I purchase to repair the good part of lines to connect a new fitting to? I'm not sure of fitting and thread size for each fitting. Any help will be appreciated.
@prestonlovell9210 ай бұрын
Is the line/hose that the 17mm bolt is connected to a power steering return line? Trying to find a replacement and can only find the high pressure one
@matthewstone54294 ай бұрын
Where did you get that shift boot? Ty very much
@jjacevedo3206 Жыл бұрын
Good video
@victorserrano6380 Жыл бұрын
Question 🙋♂️ the rack and pinion what is the lines they have I would like to know if the rack and pinion have powers steering lines for the fluid obviously but rack and pinion have transmission line too?
@randomrebuilds Жыл бұрын
I don't believe there is a transmission line running into/out of the rack and pinion steering assembly.
@victorserrano6380 Жыл бұрын
@@randomrebuilds you can help me if you know where you think my power steering fluid it’s coming and going thru to the transmission I been having this issue for a while trying to figure it out and then the transmission have a area where it throws out all the fluid when over flooded some people tells me was the speed sensor but I’m trying to continue doing research
@josiahgaming76122 жыл бұрын
How many hours did this take you boss? My mechanic is 100$ a hour so I’m tryin to get a range of what I’d be paying for labor
@randomrebuilds2 жыл бұрын
Going to estimate removal was 3 hours and reinstall was 4.
@timothyramsey2416 Жыл бұрын
I know this was posted over a year ago but do u still have ur accord?? I have a few questions, like what all I can remove from the engine bay (cruise control, a/c ect.) I am working on my steering rack now. I did the entire suspension and the shop said they could allign it cause the rack was bad. I have a mint 91ex and really don't wanna let this car go. Its sat for a year now so it needs a bit but it's worth it
@randomrebuilds Жыл бұрын
Its still being worked on at the moment. I would get a rebuilt steering rack and have that installed. Do not give up on your CB7. Things do wear out but if you saw how cheap and flimsy 2020+ cars are being built, they won't last very long.
@matthewmilligan8555 Жыл бұрын
What did you do with the line that went between the left/right steering boots? I’m doing the same job currently. The Detroit axle came with the line zip tied to the axle, but I’m hesitant to tighten the rack to the car with the line being pinched between. Thanks.
@randomrebuilds Жыл бұрын
I think I just left it alone and bolted it into position.
@matthewmilligan8555 Жыл бұрын
Well after struggling with trying to reattach the old line for 1/2 an hour I’m inclined to go that direction haha
@fernandohuape144Ай бұрын
How much u pay for the rack and pinion
@perryjones89976 ай бұрын
hmm....the two bolts (drivers side) that hold the rack to the frame.... the bolts easily slip in and out??? Its like maybe the nuts that were welded to the other side of the metal broke off....dang...what to do now....
@randomrebuilds6 ай бұрын
That could be a catastrophe. Almost like a subframe swap needed at that time then…
@perryjones89976 ай бұрын
@@randomrebuilds not going to do that…I’ll try something else… anything else…I’ll post my results. Thanks!
@bryanlevy3481 Жыл бұрын
What else do I need to remove on the left side to allow the shaft to go into the hole to connect to the stering ??
@randomrebuilds Жыл бұрын
You will need to push the rack pinion as far to the right and its a tight fit to get it in the subframe area while pushing the steering shaft up into the body of the car.
@crooksonestopshop Жыл бұрын
great video but any chance can you tell me what size is that bolt if you know exactly at 12:56
@randomrebuilds Жыл бұрын
I believe those are 14mm
@crooksonestopshop Жыл бұрын
@@randomrebuilds thank you
@crooksonestopshop Жыл бұрын
but i meant the size thread and length
@user-zk9uq2mf8q2 жыл бұрын
I wish u knew about it when engine was out lol but great job
@bryanlevy3481 Жыл бұрын
Kinda Helpful but your not showing everything how install the new rack the stering shaft is getting hung up Help...