Radar vs. Ultrasonic Level Measurement: Choose Right Technology for Accurate Results

[@mbkbrb11ytb]

Another significant difference between Radar and Ultrasonic technologies is in responsiveness to the target material. In both cases the returned signal to the sensor is a reflection from the object being measured. The strength of a reflection from an interface is based on effective change in impedance going from air to the object. In the case of ultrasonic you tend to get a good reflection from most flat objects whose acoustic impedance will normally be orders of magnitude different from air. Generally speaking you will get an equally strong reflection from a flat surface made of steel, plastic, drywall, or calm water surface. In the case of Radar technology the important factor for a material is it's DK value - related to how well the material conducts electricity. So a radar sensor will get very high amplitude reflections from a metal surface, while getting almost no reflection from a plastic surface. Strong echoes can be achieved off of a water surface, but you'll get a much weaker echo from a low DK petrochemical material. If the object of interest is high DK (like water), but there are higher DK obstructions present (eg. metallic objects nearby) then you will get disproportionately stronger response from the false metal targets compared with the water surface compared with an Ultrasonic technology.

[@InstrumentCalibration]

Hello Yes, you are absolutely correct. Thanks for sharing your knowledge in comment box. I really appreciate it.

[@bukadakfighters3578]

Thanks a lot for this video it so helpful

[@mdirshadahmad578]

Sir ur video is so helpful

[@InstrumentCalibration]

Thanks and welcome. And keep supporting us.

[@kadali1987]

Sir please make a video on different types of control valves and its uses ,

[@InstrumentCalibration]

Hello Kadali Sure...I will make video on this topic

[@kadali1987]

Thank u very much

[@bongumusainnocentmavuso7359]

Sir can you please share drum level control calculations...

[@InstrumentCalibration]

Hello Sure... Please share me your email address

[@surendrakverma555]

Thanks Sir

[@InstrumentCalibration]

Great to hear that you enjoy our videos

[@AnkitYadav-kr8tz]

Can you explain some transistor like NPN and PNP. Where to use and which type is most useful??

[@InstrumentCalibration]

Hello Ankit In this channel, our core focus is to concentrate on instrumentation only. But I will send you the documents, Please send me your email id

[@kehhkhuantan2550]

Hi can I have it also?

[@pontsholekoala6247]

Great stuff

[@InstrumentCalibration]

Thank you. Thanks for watching our videos

[@ayyappaakula8821]

Hai sir please share Analyzers calibration and maintenance I need SDI Analyzer and TOC Analyzer

[@InstrumentCalibration]

Hello Will make one video on this topic once i have content.