Radiator Fan Cable Mods

[@georgesj9536]

Loving the more frequent uploads! Just wondering, how long does it take you to complete the 'average' watercooled build from start to finish? (with cables etc but no custom paint)

[@kidesss]

Never gonna see the cables, sleeves them anyway... Perfection* :)

[@bnice2me691]

Wow this has been the third video this week. Daniel you're on fire!

[@mrpink5039]

I have modded these fans before. I found the best way to keep the cables in check as they come out of the fan was to dremmel a hole through the side instead of cutting the clip off.

[@1911Savage]

I bought one of those flameless torches. Worked for maybe 10 or 15 shrinks and quit. Had to go back to open flame. I liked it while it did work though. :)

[@DjManeyecool]

Fantastic guide. Thank you. I just need to learn what connectors to bye so i don't grab the wrong type. other then that im gold. & yes the fan splitter (Phobya) is great i could only get 1x4 x4pin from Germany in eBay. PCCG & Mwave don't stock them.

[@Dunkelelf3]

search for modmytoys on amazon.. you can buy basically every fan splitter you want there..

[@ampmunkey]

With a setup like this, could you run the power lines in parallel and just run individual signal wires with an umbilical type setup? Not sure exactly how pc fans are controlled, I'm used to ESCs with power, ground, signal, and optional signal ground.

[@Jakenmbr50]

How do you cut the matte black vinyl for the fans into a perfect circle?

[@brandishwar]

There are circle hole punches that go up to larger diameters. Check craft stores or the craft sections at online or department stores and you can probably find one -- e.g. I saw them at Michael's the last time I was there.

[@jimbossimrigs7961]

Which mini heat gun was this?

[@michaelknight2897]

Very useful video thanks. I wonder if anyone makes an fan AND led splitter. I did a quick search and didnt find anything. Would it have been better to do this before sleeving (up to the point of crimping)? I am not nitpicking, im just trying to understand.

[@vibhavsingh5654]

Please the the name of the PWM splitter you are using

[@pablocom4]

Hello. Some size of AWG will be the best for modifying cables to the power supply.

[@sadus33]

What software adds such a nice temp overview on the desktop (top right hand corner) when the system is ready to be shipped?

[@joshuadhondt6005]

Dear Daniel, I've got an NZXT grid+ fan controller but cable management is horrible, can i use a fan hub like you are suggesting behind the fan controller as long as i dont go over the 30W power limit for the grid+? Looking forward and many thanks for your time! Keep up the good jobs you do, really like the content your making!

[@pinepcdesign8459]

Loving these tutorial kind of videos.

[@navneetraman]

looks like some one has been pshing liveos like crazy great work!!

[@mbowski]

Hey. Love the channel. I got a question regarding fan connections. I'm planing to run 6 non pwm 3 pin fans on 2 x360 rads. Can I run and control all of those fans with a powered fan hub off of the cpu opt on my mobo? My motherboard has the option to control the fans with voltage control.

[@sjn8099]

Great. Why not a push pull on the top radiator. There is place enough or?

[@brandishwar]

There's little point to doing that. It's 4 more fans, meaning 4 more fan cables he'd be modding. Another splitter. Another channel he'd need on the Aquero for controlling those fans if one channel cannot handle 8 fans (likely not since that'll likely mean more than 1A of current). All for... a couple C difference in temperatures.

[@MrKrantiRana]

amazing cabling work

[@Vladek16]

I really like this new video format and your publishing rate :D nice job !

[@stephanehoareau4325]

where can I find such fan splitters, wouldn't want to make a mistake:)

[@giorgioisgaming5814]

I would simply sleeve the cables AFTER cutting, so the chances of confusing the pins is way lower 😎

[@landwolf00]

And here I am throwing all my fan cables behind the motherboard tray. Pleb life.

[@GF3HG]

where can you buy the fan splitter?

[@isti1986]

did you figure it out? I kind if want to know too!

[@Bolagnaise]

István Fodor www.performance-pcs.com/modmytoys-4-pin-pwm-power-distribution-pcb-4-way-block.html

[@krieghoff4515]

I hope Daniel was just checking to see if the fan still worked after his "purrrrrfect" custom wiring, because at 8:35 its spinning the wrong direction =D

[@iaial0]

That's killer! Thanks

[@taipeitaiwan10]

OCD much? Why you build the best! Love to see details to art.

[@gyrozepelli872]

how is the fan splitter stuck to the rad ?

[@Dan81825]

sticky velcro that comes with the splitter

[@ahmadilyas5736]

I am early, so I am asking when is the element 6 build coming

[@kungfufury8218]

What kind of case is that? :Nvm its the CaseLabs Magnum SMA8

[@matrixfire]

Can you please start selling the Modmytoys fan hubs as there is no one in Australia who sells them

[@austrian_s60r64]

i have 7 m 140 red leds hooked up to a port on my motherboard with the splitty 9 from ac and even at full throttle there are no problems

[@heinzbecker691]

do you realy use those very loud fans from corsair...i use noctua...i knew they are ugly but they are very quiet and have a great performance...i would rather like to paint the noctua then use this turbine fans xD

[@Dunkelelf3]

doesn't really matter with this overkill rad surface i guess.. they can run on minimum all day even under load..

[@heinzbecker691]

Dunkelelf3 kannst auch deutsch antworten...sieht man doch am namen xD ich kenne diese lüfter...die drehen selbst auf minimun bei 1200 oder so...und dann machen die hässliche geräusche...ganz miese dinger...ich hab meine noctua bei max 900rpm laufen und leerlauf 600...das ist dann flüsterleise...ich nutze aber auch nur 30mm dicke rads...besser für airflow und wärme abtransport

[@noneofyourbusiness9249]

Hi

[@lukejames1111]

You really need a microphone

[@thathorrorshow4126]

Bad Ass

[@NHKM334]

3

[@marky5204]

4

[@joshpierce4639]

2