Radiator Replacement for 1998 to 2002 Honda Accord

#BulletSolano #BalazoSolano #2000Accord #Honda #Radiator #TransmissionFluid #DestilledWater #Antifreeze #HowTo #Replacement
My Website www.bulletsolano.com/car-prob...
Hi Guys and welcome to another episode
if you have any questions please let as know
Thanks for watching and don't forget to Subscribe.
amzn.to/3cQwfvc Autosaver88 Accord Radiator
coiloverdepot.com/products/98...
amzn.to/30e2Zd5 KIPA Adjustable magnetic camber wheel alignment Tool
Truhart Rear Camber Kit amzn.to/35wBjB2
Ball Joint Separator tool amzn.to/2FzU2kM
amzn.to/2ZGl4A2 2019 RAV4 Interior LED Kit
amzn.to/2QEC99o Dome Light LED for 2019 RAV4
amzn.to/2QANWpj Map Light LED, Visors and Cargo Area
amzn.to/2LWnlkW H11 Aukee H11 LED Bulbs
amzn.to/2Of4Qtx 9006 LOW Beam K2 LED Lights
amzn.to/2ODkoGB 9005 HIGH Beam K2 LED Lights
amzn.to/340nFGu Interior LED Lights Honda CRV
amzn.to/2JPDaZC Eco Smart Waterless Wash & Wax
amzn.to/2Wj6ywi Waterless Wash
amzn.to/2WiEkSx Nonsense All Surface Cleaner
amzn.to/2WksneU Dilution Bottle
amzn.to/2MTnnLa Boar's Brush
amzn.to/2M6ozdY New LED's for the 2019 RAV4
amzn.to/2LPkdYm Chemical Guys Headlight Restorer
amzn.to/2neWg3h Hood Lift Support RAV4 2019, 2020 All Models
amzn.to/30aVjvi Interior Lights
amzn.to/2Nq0WPd Dome Light
amzn.to/31yLZhj Reverse Lights
amzn.to/2LBAsIr Syneticusa Front Turn Signals
amzn.to/2MHE11L Griot's Garage Glass Sealant
amzn.to/2HjDrnt TACKLIFE T6
amzn.to/2Hrgk9W HINOY E-POWER43 Battery Jumper
amzn.to/2W6orOv Sony RX 100
amzn.to/2WlTx50 Impact Gun
amzn.to/2FRTAQj GoPro Hero 5
amzn.to/2MyAEY5 Retrofit Projectors
amzn.to/2DnL49Q LED Strip Turn Signal
amzn.to/2Dma4OO H1 HID Kit
2000 ACCORD CABIN AIR FILTER REPLACEMENT
• 2000 ACCORD CABIN AIR ...
HOW TO BLEED BRAKES with a Manual Pump
• HOW TO BLEED BRAKES wi...
TOPDON Tester
amzn.to/2S38N4q
/ bulletsolano23
------------------------------------FOLLOW ME---------------------------
Follow me on Instagram
@bulletsolano36
Follow me on Twitter
@bulletsolano
Like my Facebook page
/ luis.b.solano.3
Thanks for watching.

[@hegamez303]

Keep making videos about the 02 Honda 🔥🔥🔥 you made it simple. You explained very detailed. & you got it done 💯 I love my Honda Accord so I need more keep up the good work I’ll be trying to replace my radiator tomorrow

[@Doomgel]

I appreciate how thorough you were. This was by far the most helpful video I've found.

[@BulletSolano]

No problem

[@brucemaier3943]

Thank you so much! I just replaced my valve cover gasket and it was difficult , the bolts with the grommets . It turned out perfect but I found out I must have leaned against the radiator and broke the outlet nozzle. So now need a new radiator and there you were my friend with a really good video. I will keep watching you. I love my 2002 Accord 2.3 !

[@tylerstevens6052]

Just changed my radiator and I couldn’t do it with out your help! Thanks Bullet Solano!!!

[@ScreenPrintRay]

this video is one of the best for anyone who has never done it themselves

[@gearheadwrenchin8142]

Getting ready to do this job on my accord. Thanks!

[@edwardwinningham1110]

THANK YOU so much man. You are extremely easy to follow and listen to. I appreciate your time sir.

[@BulletSolano]

No problem

[@JoeBrownJudge]

Your videos help me a lot dude! I just replaced my front motor mount with your video!

[@BulletSolano]

Nice

[@totalnoobfishing1753]

Bravo Bullet!.. This is the BEST video on KZbin, I have to do the same repair for a 2001 Honda Accord and your video will make the job simple. I'm SUBSCRIBED!

[@BulletSolano]

Thanks

[@johnmole4769]

Excellent video. The only thing I wish you would have shown is how to remove the clips from the wiring harness for the fans off the radiator. You kind of skipped over that, it looked like maybe you had already replaced them with zip ties. For anyone wondering, those white clips can be removed by using a slotted screw driver from each side under the flange and pushing. But excellent nonetheless. You the man!

[@ahoorakia]

good video,just make sure to check transmission fluid with engine warmed up,but turn it off to check,unlike most other cars!

[@ColdWarVet607]

Great job, well done & thank you my friend!

[@BulletSolano]

Thanks

[@allenthompson4714]

Just used this video to replace my radiator. 01 coupe automatic 330k miles. Thanks!

[@johnmtz3626]

Good video, going to change my radiador today Saludos desde México

[@BulletSolano]

Gracias, saludos

[@Notdinolove]

Very helpful! Thanks!

[@BulletSolano]

No problem

[@joshbennett]

Super helpful video! Thank you so much.

[@tbonky]

Excellent video Bullet! I appreciate all the detail!

[@johnnycastillo8653]

Great video! Very helpful.

[@BulletSolano]

Thanks

[@kojkuv100]

Your awesome dude, keep them video coming

[@BulletSolano]

Thanks bud

[@davidaflague9157]

Thanks, Bullet!!!

[@BulletSolano]

No problem

[@Iamtherodlight1453.]

Awesome video thank you so much

[@lewistanksley3917]

very educational video keep up the good work and make more videos

[@BulletSolano]

Thank you

[@GOBEARS1985]

I found it was it was easier for me to remove the the trans cooler hoses from the other end of the hose then take them off the radiator once its out. They were just more accessible from the top for me.

[@jrstevens1980]

Great video bro! Did you make a video for the thermostat? Thanks!

[@BulletSolano]

kzbin.info/www/bejne/n4SmiKF7abqKhNUsi=dTzjyb9SZ170IciK

[@apacalyptic1freelancevideo823]

when installing the Transmision fitting do you put any sealant thread or sealer on like they do when doing plumbing or do i install it bare of any sealers. meaning do i just screw it in as is?

[@BulletSolano]

Screw it as is

[@minatogotmoves6997]

Bought the radiator, hoses and thermostat, just wondering what size hose clamps i should buy for the upper and lower hoses?

[@BulletSolano]

www.ebay.com/itm/400915437976

[@DeafPunk]

Is that bigger cooling fan aftermarket? My stock cooling fan doesn't line up with my new radiator stubs on the bottom and on the top

[@BulletSolano]

Is the stock one

[@hayzeusare9412]

does this apply for manual transmission 02 accord 2.3L as well or its a little different?

[@BulletSolano]

Same process, just with out the transmission cooler lines, manual accords don’t have those

[@dougallen3478]

I hope you and your family have been doing good these past few months I ain't seen you around much that's cuz I've been too darn busy. It's 95 PT cruiser fan motor is about to kill me I don't think it's been six maybe five months since I replaced it and the two relays is there anything that you can think of that I'm doing wrong or that I've missed or do you think I got a bad fan motor ?

[@BulletSolano]

If you have a probe do a test on the new motor to see if is working

[@dougallen3478]

@@BulletSolano Ok all I have is a test light , Do they go out like that ? Even though being fairly new ?

[@BulletSolano]

It depends on the brand

[@evilpoIice]

is it ok if some transmission fluid drained out after changing my radiator? it wasn't a lot

[@BulletSolano]

Yes but check the level

[@prentice508]

Did you use any sealing tape on the transmission line fitting on the back of radiator?

[@BulletSolano]

No, clamps are enough

[@prentice508]

Thanks

[@dougallen3478]

Hey boy how you been Buddy this is Doug I got a question for you if you got time remember my other car my 95 PT cruiser well I did what you said I put a new fan on it I replace both of them relays and now it's not coming back on again what am I doing wrong

[@BulletSolano]

Hey man, doing great thanks! Check your connections and make sure is the same relays

[@nopressuremedia2758]

Great information Going to do mine soon will be back to let you know my results #Your100liked👍🏾

[@BulletSolano]

Nice #100 thanks bud

[@seandwyer6074]

Does it matter that my transmission is manual vs automatic for steps in the repair?

[@BulletSolano]

It doesn’t, you’re vehicle doesn’t have transmission cooler lines, that’s the only difference

[@stalkedskinwalkers9811]

Hey bro thank you for the video I'm swapping mine tomorrow. I got a question if you think you could answer it about Hondas. I got a 2.3 Accord motor VTEC and it's making some kind of little sound like something's loose when I get about 3,000 4,000 RPM sounds like a pulley hitting metal. Wonder what it could be if I sent the video could you figure it out or know? immediately

[@BulletSolano]

Check the timing belt cover, and the alternator pulley

[@stalkedskinwalkers9811]

@@BulletSolano thank you bullet

[@travisrauschenberg1405]

Great Video... Mine is 2001... What would you do if the Drain Plug to the Radiator is Broken. Also can you do a video on you bleed the Radiator once you replaced... Didn't really see that part in detail.. Thanks

[@BulletSolano]

If is just the plug get a new one from the auto parts store kzbin.info/www/bejne/h6HcmGpji86ardE

[@travisrauschenberg1405]

@@BulletSolano I bought a new Radiator & hoses, but the plug is broken in the old one, do I need to drill out to drain first or just pull hoses of to let drain, and not worry about that plug which is stuck in there

[@BulletSolano]

Yes remove the hoses

[@georgeblue3835]

Hey i have a 98 accord stick shift nd i took out my radiator but i did not have a hose connected to transmission oil cooler is it because i have a manual?

[@BulletSolano]

Yes, transmission oil cooler is for automatic transmission only

[@georgeblue3835]

thanks!

[@fabriziofabrizio3124]

What are the gold things at bottom

[@BulletSolano]

On the radiator? Transmission cooler line fittings

[@bloodout666]

Son los mismos pasos para el radiador de una 98 odyssey?

[@BulletSolano]

Si

[@bloodout666]

Gracias bro

[@kikiboxing4life]

I noticed your radiator came out of a 1998 is 2000 Honda same thing will you come out the same ? I’m trying to replace my radiator And thank you for sharing comes in handy

[@BulletSolano]

My car is 2000 and the process is the same for any 6gen accord, the only difference is the automatic transmission cooler lines

[@DELMQR1]

Any ideas as to why my coolant reservoir overflows?

[@BulletSolano]

Do a head gasket test

[@dougallen3478]

I sure can feel you won't know what you're doing right here on this video I been dealing with mine also but I think I figured mine out though the plug that goes on the little sensor for over the thermostat housing is the wires that were broke that's the reason my mind wasn't coming on

[@dougallen3478]

Wow that is not what I said

[@dougallen3478]

What I was saying was I feel for you on your video that you're doing here about the fan motors on your Honda I've been dealing with mine also when I think I figured mine out though it wasn't the fan motors it was a plug that connects to the sensor on the thermostat housing the wires there were broke

[@eduardosamplina317]

Las mangueras si están vencidas sube la temperatura si o no

[@tasharigg9274]

Did you use your same radiator cap? Mine doesn't fit this one and I can't get customer service to answer my calls or emails. I bought the same radiator as you. I just need this car back to running!

[@BulletSolano]

Yes I got the same cap, it should fit, press harder! Because the plastic is new on the radiator maybe is a little ticker on the neck, pushed it down harder to put it in place

[@BennyParcher]

I'm going to replace my radiator but I'm a little confused on the process of adding new coolant

[@BulletSolano]

Just add new fluid and bleed the system kzbin.info/www/bejne/h4PanoRjgchjfKM

[@joeljasso783]

Oye bro los radiadores de aluminio son buenos mi honda trai un radiador de aluminio asilocompre el carro con el radiador de aluminio saludos

[@BulletSolano]

Antes traía uno en mi Mitsubishi eclipse pero se trono al año, y compre de plástico, me duró más

[@joeljasso783]

Bullet Solano ok gracias bro saludos

[@jurdilus]

Hey man thanks for the video, I'm ordering new radiator for my 1998 Honda LX 4 cyl. When I fill the new radiator, do I add the fluid before I start the engine or after it's running?

[@BulletSolano]

No problem, antifreeze goes before, and bleed the system kzbin.info/www/bejne/h4PanoRjgchjfKM

[@jurdilus]

@@BulletSolano thanks bro, one last question, do you leave the radiator lid off or on when you start the engine so you can bleed the system?

[@BulletSolano]

I send you the link for the video on the bleeder screw location, you don’t have to leave the cap off

[@cashonhotspot2707]

Yo please let me know, will a pa66-gf35 radiator fit in a 98 accord?

[@BulletSolano]

I believe only gf30 not gf35

[@cashonhotspot2707]

@@BulletSolano how do I find out

[@BulletSolano]

Don’t know bro, just get one from Autozone, with lifetime warranty

[@rosserwrenn4207]

What brand is your cordless driver?

[@BulletSolano]

OEM Tools from Autozone

[@SantiagoRamirez-pp2ju]

Same for the v6?

[@BulletSolano]

Yes almost the same

[@joseemmanuelarmenta978]

Water goes before or after turning on the car

[@BulletSolano]

Before

[@An060500]

Do you have to bleed the system in case is in the lines

[@BulletSolano]

Yea you have to

[@An060500]

@@BulletSolano I just changed my radiator and it startkng to over heat

[@BulletSolano]

Bleed the system again

[@An060500]

@@BulletSolano thank you I will give it a try today

[@ericmansour5041]

how do you know when the system is bled completely?

[@BulletSolano]

Only water should come out, with no air

[@ericmansour5041]

@@BulletSolano thanks

[@eliasdefairia9910]

I have a 4 cylinder manual

[@BulletSolano]

The only difference is the transmission oil cooler, you don’t have that

[@mr.eggscellent6997]

Do I need to flush my radiator before I replace it?

[@BulletSolano]

Flush the old one? No just put the new one on, but if you wanna clean the system before installation it will be better

[@mr.eggscellent6997]

@@BulletSolano Thanks, I drained the old radiator, and ran a hose through it. Then took the old one out today. Now I just have to get the right one from Autozone, I think I need a Denso build.

[@stalkedskinwalkers9811]

I have a problem can I send a video and you look at it and announce it

[@BulletSolano]

[e-mail]

[@waled226]

Tap water ?

[@BulletSolano]

Is better with water with out minerals

[@hiramalonso97]

How you remove the clips so easily?!

[@hiramalonso97]

@4:55 how the hell you do that with one hand!? Wtf

[@BulletSolano]

😂😂 I have mechanics hands bro

[@BulletSolano]

I don’t know bro, I guess my is just to easy to remove, but put some wd40 or if you have a heat gun put some heat to it to get it out!!

[@winec00ler]

Still to hard for me - whats a fair price to pay a mechanic to do this for me?

[@BulletSolano]

$120 to $150