RadioMaster Tips - Episode 1 - Whats the best reciever for your RadioMaster radio?

[@chiparooo]

Great topic. There is not much info out about this if you are new to the hobby. I just purchased a Radiomaster Pocket with some Radiomaster PWM receivers. I was wondering how other receivers would work with it. Thanks for sharing!

[@tdogrc]

Great! Glad you found it useful. Thanks for watching 👍🏻

[@RC-Flight]

Nice, thanks for taking the time to make this video!

[@tdogrc]

@@RC-Flight no problem thanks for watching 👍🏻

[@tjeffpowellful]

Thanks for an informative video. I too have been flying Frsky and have a lot of receivers which I use with my TX16S. I don’t like the fine tuning needed with Frsky. I’ve recently bought some Lemon receivers and I’m impressed with the value for money. They are Spektrum compatible.

[@tdogrc]

No worries thanks for watching 👍🏻

[@warbirdflyerF4U]

I've used mainly FR sky X8R And tried a few of the spectrum receivers I was not as happy with the signal strength with the spectrum One that works exceptionally well but are hard to find are the hitec Receivers such as the optimus 7 And nine Use the frequency fine tuning portion on the radio master and you will get incredible signal ! I get 20 to 25 points better on RSSI strength compared to any other receiver Using the Hitec optima !! Have not tried any of my fly sky receivers yet But I plan to do some testing as I have a bunch of those Thanks for the great video

[@tdogrc]

Not tried Hitec before but I know their servos are good. Thanks for watching 👍🏻

[@itzjoeylo4501]

I’m new…. Futaba fixed wing line of sight RC flyer just expanded into FPV. Greetings from Oklahoma 🇺🇸💥🔥

[@tdogrc]

Greetings. Welcome onboard 👍🏻

[@guyguybohurst3304]

My Radio Master TX16S is working well with all of my Spectrum brand receivers.

[@tdogrc]

👍🏻

[@R.B_B]

Nice video. What is the brand of the sensors?

[@tdogrc]

Thanks for that 👍🏻. It’s a Flysky sensor.

[@stnikou]

Can you use TX16S with a FrSky Archer Plus SR10+ receiver?

[@tdogrc]

@@stnikou hi. No it doesn’t support the new frsky access protocol 👍🏻

[@stnikou]

@tdogrc i am looking for a receiver that has 10 ch and stabilise can you suggest anything i mean for TX16S

[@tdogrc]

@@stnikou you could try Lemon RX. I have used them with the radio master. Motion RC sell them 👍🏻

[@stnikou]

@@tdogrc So 10-Channel DSMX™ Compatible Telemetry Receiver with Gyro Stabilization from Lemon - LM0087VP will be ok for binding with RadioMaster TX16S with the 4-in-1 module LBT?

[@tdogrc]

@ yep dsmx is compatible with 4 in 1 module.

[@PrinceWithoutRealm]

If you had to recommend, would you get the 4 in 1 or eslr tx16s?

[@tdogrc]

It depends on your requirements really. If it’s long range FPV then ELRS otherwise I’d get the 4 in 1. Cheers 👍🏻

[@bentslattsveen2208]

Hi, do you know any shop still selling the RadioMaster R161 Rex?

[@tdogrc]

No I’m afraid not. I don’t think you can get them now.

[@ktakis76]

Hi..i have a question .can i bind the TX16s with futaba receivers?

[@tdogrc]

@@ktakis76 absolutely as long as you get the 4 in 1 version 👍🏻

[@ktakis76]

@tdogrc Sorry for being so detailed, but as i can understand, i have to attach the 4 in 1 module to the tx16s and after that i will be able to bind?

[@tdogrc]

@@ktakis76 yes if you have an ELRS TX16 but you can buy a TX16 version that has the module built in 👍🏻

[@ktakis76]

@@tdogrc Thank you very much.i hope to figure out...

[@theoztreecrasher2647]

@@ktakis76 Something that you should also note is that your Futaba receivers must be Futaba S-FHSS protocol (NOT FASST) to be bound to a Multi Protocol Radio.

[@Ed-eq8ui]

In my case I purchased a batch of six R88 receivers. Every one of them suffers from the so-called "swamping" issue. If you have the TX16S transmitter too close while you are testing the receiver and aligning your control surfaces, after about 10-15 minutes, the connection between the transmitter and the receiver goes bad. The servo responses become erratic with any control input from the transmitter. I will not trust these things in my airplane. Love the transmitter, hate the receivers.

[@tdogrc]

Good info. Thanks for that 👍🏻

[@DP69264]

So I see the lemon rx, but are there any micro size pwm RX that have stabilization that you know of?

[@tdogrc]

No not micro. The frsky S6R is probably about the smallest.

[@RC-planes.]

How about radiolink rx?

[@tdogrc]

Not tried those. Are they good? Thanks for the comment 👍🏻

[@RC-planes.]

@@tdogrc I use radiolink tx but wanted to upgrade to tx16s tx because of multi protocol ,I never had a problem with radiolink rx,s and they are cheap also

[@tdogrc]

@@RC-planes. just had a look online. They look good. Thanks 👍🏻

[@RC-planes.]

@@tdogrc lt me know if you will try them thanks

[@rcrotorfreak]

4-1 i think doesn't suppose radiolink.

[@carlosmoran9957]

Very nice video, do you know if the Hotrc receivers would work with Radiomaster? Thank you.

[@tdogrc]

Thanks for that. I’m not sure about those receivers sorry 👍🏻

[@Meonlymeagain]

As standard the 4 in 1 automatically maps spectrum rx's so on the tx16s you use aetr as standard and the 4 in 1 remaps it to spectrum ie channel 1 throttle etc. All this can be remapped by downloading an update with special configurations but as standard it will remap. You can also set up in the radio in opentx under remapping the output and inputs. Always take care and test out without prop. Lots of people caught out by this. Mainly use Frsky rx's as that's what I have used and they have always been reliable.

[@tdogrc]

Great thanks. Yes good advice on the props! 👍🏻

[@rcrotorfreak]

Bro where u got ur stick ends?

[@tdogrc]

They’re the AG01 stick ends 👍🏻

[@vineetaquarius]

very informative video thanks for help

[@tdogrc]

Great thanks for watching 👍🏻

[@RAYROTHSTEIN66]

I could swear that ive used access frsky recievers on my stuff. Ive used archers and telemetry receivers on it.

[@tdogrc]

Hello! Pretty sure they won’t work because they’re encrypted. 👍🏻

[@RAYROTHSTEIN66]

@tdogrc I just went to my sailplane and it has an archer 6 channel in it.

[@tdogrc]

@@RAYROTHSTEIN66 and your using it with your Radiomaster?

[@tdogrc]

@@RAYROTHSTEIN66 apparently some of the Archer receivers use ACCST V2 as well, so it’s probably that 👍🏻

[@MammothPaige]

Thanks

[@tdogrc]

👍🏻

[@heklik]

Hello, what's the difference between 4 in 1 and elrs ?

[@tdogrc]

@@heklik hello. 4 in 1 let’s you use lots of different receivers such as Frsky, Flysky, spectrum and Futaba. ELRS only lets you use an ELRS receiver. But ELRS is great for long distances and Radiomaster make some great ELRS receivers.

[@heklik]

@@tdogrc Thanks. ,guess I'll buy the 4 in 1, I have a DSM2 and a s-fhss receivers.

[@theoztreecrasher2647]

@@heklik Buying the 4-in-1 Internal Module Version makes the most sense with these. If you decide later that you want ELRS you can add a VERY high power output module to the rear bay. There it can be powered by a large external source and have much better cooling than an Internal ELRS Module. External Modules are comparatively cheap AND transposable.