RadioMaster TX16S Battery Percentage Widget

[@Ard1400]

Thanks Bill!

[@MrBob6939]

Great videos, always helpful but i am yet to find a video that explains how to show the voltage of the Lipo battery that's in the model.... i am sure this is possible but nothing seems to work?

[@the-happy-RC-flyer]

Please check out this video kzbin.info/www/bejne/q6OUnaF8ibdrbpY

[@kglas]

These TX16S are really really helpful,especially for beginners like myself. Just as a suggestion...any chance of showing how to set up mixes for, say, aileron and rudder?

[@the-happy-RC-flyer]

Hi Ken, my radio videos are aimed at beginners so really pleased they are helping you. Check my channel tomorrow and my video should help you out.

[@jkjk-hj7hb]

Thank you Useful !!

[@cloudstrife778]

Is that just for the transmitter? Is there a way to show battery voltage/percentage from the airplane?

[@the-happy-RC-flyer]

Yes you can but it will require a receiver that has telemetry and can receiver the high battery via an additional wire. If you search my playlists you will find videos on how to set this up.

[@hillscanlon2717]

Thanks Bill always good to watch, I'm having a problem charging tx16s with the USB cable it turns green when I plug it in but a couple of seconds it goes off no light on raido, I'm using the raidomaster battery and I've changed the USB cable but no luck any ideas 😕thanks.

[@the-happy-RC-flyer]

Hill, when the LED goes out it is showing the battery is fully charged. Have you tested the battery with a multimeter? Have you left it plugged to see if it does charge? Also are you using the base USB port to charge the battery not the top USB port? Check in the SYS, Hardware menu under Battery calibration the battery voltage.

[@hillscanlon2717]

@@the-happy-RC-flyer Thanks Bill I will check the battery as everything else is OK thanks, have a great sunshine day in the capital 😀

[@SunriseWaterMedia]

When you mentioned 6.6 volts, is that the "Alarms: Battery low" voltage? Also, what do you recommend setting the "Battery Meter Range" to? I'm using a 2s 3000mah battery.

[@the-happy-RC-flyer]

It depends on the type of battery you are using. If using a Lipo or Li-ION battery I set my alarm at 7.4 volts. If 18650’s 7 volts. The operating voltage range of the TX16S is 6.6 to 8.4 volts so would not drop my battery below 7 volts.

[@SunriseWaterMedia]

@@the-happy-RC-flyer Thanks, Bill.

[@pea2911]

thank you so much, ive been pulling my hair out for 2 days lol

[@the-happy-RC-flyer]

LOL shame we do not want you going bald! 😊

[@carlomarcelino9184]

Thank you!

[@the-happy-RC-flyer]

Your are very welcome.

[@Ultramesh]

You now have three indicators on the screen showing your Tx battery level.

[@fellpower]

The Link to Flying Robot is not working ;)

[@the-happy-RC-flyer]

Looks like they have sold out hopefully because of my videos! 😃 I will contact them and remove the link from future videos. Thanks for letting me know.