RadioMaster TX16S with HALL Sensor Gimbals - Binding to an XK A160-J3 Skylark with 3D/6G System

In this video in the series featuring the RadioMaster TX16S, I am demonstrating how to bind an XK A160-J3 Skylark with 3D/6G stabilization technology to the TX16S and also program the L/H dual rate function as well as the 3D/6G switching on this transmitter:
www.banggood.com/XK-A160-J3-S...
This procedure should work on other XK airplanes using the same transmitter and stabilization system.
And here is the link to the video showing how to set up dual or triple rates on the TX16S:
• RadioMaster TX16S with...
As I continue adding my other models to this transmitter, I am going to continue making and uploading new videos to this series, so please stay tuned. Also, please let me know in the "Comments" if you would like me to cover any aspect or functionality of this transmitter.
Thank you for watching. Hope to see you back on our channel. Take care and stay healthy!

[@jgme627]

It is very useful info to understand binding and setups with Radiomaster TX16S, thanks. I got my TX16s today and am learning.

[@robertnebelsky3730]

Excellent job on setting up made that real easy

[@longjammeriii3323]

Absolutely one of the best set up explanation of the xk models I've seen my friend you have been very thorough in your descriptions it also tells me why one of my planes doesn't respond to the high-lo rate switch i selected 🥳🥳🙏 thanks from a grateful Alan in the UK 🤗🤗🤗👍👍❤

[@PropsWheels]

Hi Alan. Thank you so much for your kind words. I am glad that you liked the video. Comments like yours keeps me going and makes all my time and efforts worthwhile. 🙏🙏🙏 I am just working on two follow up videos about this XX A160-J3, one about the serious rudder control issue on this airplane and the other a flight review of this airplane using my TX16S transmitter. I should be posting those in the next few days. Cheers Mate! 🤗🤗🤗

[@Pijawek]

Thanks man! I recieved a XK A-800 glider as a gift, but the XK controller is a piece of crap. Managed to bind it to my Radiomaster no problem, but it was stuck in low rates stabilized mode - and now I know how to fix it.

[@PropsWheels]

The OpenTX website lists the 3D6G switch as being either on CH5 or CH8, according to these protocols: github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#sub_protocol-a180---5 github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#xk---62 Why don't you try them out and let me know? I am not sure about the rates, but you can probably program them directly on the TX16S. If 100% throws are not enough, try raiding them to higher % (if allowed).

[@stratshadow]

Great video and well explained....have just got the TX16S and have got all my Eachine mini warbirds working fine.... and now I know how to get my XK A-800 working with it as well, thanks to you. I wonder if anyone found out if it was channel 5 or 8 for the 3D6G mode on this model?......anyway thanks again!

[@fahb68]

Thanks, very good video, i just order both of yhem plane and radio tank you very much

[@PropsWheels]

The plane was good during the first several flights, but then it started doing tip stalls. Please watch my last two videos in this series before you fly it: kzbin.info/www/bejne/rZqpcoV9nLuNgas kzbin.info/www/bejne/rH3HoIqNnZ59pac

[@user-vo7ju9es7g]

How do set up the 6G3D settings though I am using edgetx?

[@creepinonthebabes]

couldnt bind mine with "KN WLTOYS " it worked with "V911S E119" as someone else suggested. and ch6 was rates and 7 safe

[@DavidSmith-dm8ew]

Thanks, I had to do this protocol also

[@akmalmarzuki8660]

​@@DavidSmith-dm8ewdo u got it to work for rates n 3d 6g?

[@akmalmarzuki8660]

Do u able make those two switch work??

[@DavidSmith-dm8ew]

@@akmalmarzuki8660 No, the dang this is terrible to fly and I smashed it into the ground and it's no more lol

[@TheDuncandan]

You are binding a XK model but KN on the multi module. How did you find the protocal. I've got the TX16S and I can't get a PROPEL drone to bind or a Hobbyking S-3 drone. Yet in the mutimodule list they have Hobbyking and Propel. Any ideas.

[@alvandergoot7237]

Hello great video. Would this protocol also work with xk a290 f16? It utilizes elevons. Thanks

[@tilmanlinder3017]

Hi, even with watching your video binding the A160 with the TX16 using KN does not work. Have You any ideas?

[@akmalmarzuki8660]

Do u do esc calibration? Do it need to bind each time to fly?

[@dorivalliessi215]

Good morning, I did everything as shown in your video, but it doesn't bind with my TX16S, do you know how to help me?

[@tango9944]

Just receive A160, try 4in1 in taranis X9D+, KN wltoys, it did not work , not sure if XK change its receiver or I did something wrong

[@valenciano68]

I bought an xk a430 and I can't change the 3d6d mode. As soon as I accelerate it changes to 6d and I can't go back to 3d. How can I do it?

[@michaelwheatland4565]

How did you determine that channel 8 was the stabilisation channel was that by trial and error. By the great videos, short and to the point if there is to much information it is easy to become overwhelmed.

[@PropsWheels]

Hi Michael. I should not take any credit about channel 5 and 8; I heard it while watching another KZbin video about this airplane, but using another OpenTX transmitter. I just applied that knowledge to my RadioMaster TX16S. Thank you so much for the encouragement; it gives me motivation to make and post more videos! All the best! 🙏🙏🙏

[@airmanrc1914]

Hello , recently I bought the latest A250 BF109 which is newly released. However, I found it seems it doesn’t bind with my radio master zorro tx with protocol KN . On the art box it tells it can bind with Futaba Sbus reciever. Does it mean the main board is not supporting the opentx but it needs to add on extra Sbus reciever? Your advice is highly appreciated. Thx. CY

[@gerardplaza7820]

Hi, I also have A250 QBF109 cartoon scale and I would like to pair my tx16s with it. Thanks

[@ukgardenslotracing7421]

try the V911S E119 protocol instead

[@bjornkipperberg2221]

Help...New radiomaster on xk a160 prog. ok...but trying to program a180 Raptor 3 ch. for elevons using suggested MT99XX, can get left/right bank but when stick up/down for elevator, it is not right. The video for xk a16 was wonderful...Can anyone help?

[@RS-ro8io]

Did you find solution?

[@MrMulticam21]

I tried with my radiomaster TX12 open TX. it won't bind. theres no KN in my radio. sad to say.

[@jeancorbier3276]

Always remove the propeller before binding a new plane... the engine can start at full throttle.

[@shanemichaels8289]

Could this be done with a flysky transmitter?

[@PropsWheels]

No, FlySky transmitters use a different protocol, and they do not have OpenTX multiprotocol module. However, I have heard that some people modify their FlySky transmitters to bind to other protocols. In any case, my recommendation would be purchasing a OpenTX multiprotocol transmitter like the RadioMaster or the Jumper.

[@tombyrne1142]

I tried with KN and with V911S E119 and neither work.

[@johanopperman8039]

Hi. I got me the little cub but did everything you dit but nou luck. Does not want to bind to my tx16s. Can you suggest something please. The standerd TX is rubbish

[@PropsWheels]

Dear Johan. So, did you use the protocol "XK" and subprotocol "WLtoys" on your TX16S, as I have shown in this video? If you did and it did not work, there are at least these two possibilities (assuming that its receiver is not defective): 1) XK started using a new protocol in the later versions of this A160. 2) Your TX16S' firmware needs to be updated. I suggest that you update the firmware on your TX16S to the latest version and try again. www.open-tx.org/

[@ukgardenslotracing7421]

These xk and newer wltoys models now seem to be shipping with the V911S E119 protocol instead.

[@johanopperman8039]

@@ukgardenslotracing7421 thanks. It work now. 👌

[@giovannisicilien6593]

bonjour accessoires..pour lavion a 160 il faut un résepteur pour bindé ou la radio tx16s et compatible a sette avion?

[@PropsWheels]

Bonjour mon ami. No, you do not need to install a separate receiver into this airplane in order to bind it to the TX16S. The receiver that comes with the XK A160-J3 is compatible with the "KN - WLtoys" protocol on TX16S.

[@giovannisicilien6593]

@@PropsWheels ok merci..je commande la radio tx16s et je le mes protocole kN-wltoys sur tx16s merci..pour réglage 3d en peut le faire aussi?

[@giovannisicilien6593]

JAIs oublié de vous dire la radio tx16s en peut le réglé en francais?MERCI

[@arnoldgines3381]

Hello sir.. I have XK trojan mini,I did binding in my radiomaster but it doesn't work. I follow the same procedure of your settings.what should need to do sir??

[@MrDumJang]

MULTI V911S E119 work for me

[@creepinonthebabes]

@@MrDumJang thanks, worked with my XK A-160

[@avirame71]

​@Dum Jang thanks, solved my issu too

[@ArceezRC]

What channel is the 3d/6g option with v911/e119 protocol?

[@tango9944]

​tried V911S. E119, it binds. Looks like this could be a new receiver, hope this new receiver fix the rudder issue it had in the initial release of this plane 3 years ago

[@jheath1968]

Hi there. You video has helpsd me to bind my xk180 f22a raptor but on different protocol the only problem I have is channel 5|6|7or 8 don't allow to set up to be able to fly without stabilizer. Maybe you do know how. If you could assist. I watch your videos and they very helpful.

[@RS-ro8io]

Did you find solution?

[@akmalmarzuki8660]

Find answer yet?

[@fourgedmushrooms5958]

I can't access the bloody flaps is my issue. Half the reason I bought that plane

[@Space_pirateDKK]

I don't think this specific plane have flaps?

[@ArceezRC]

This plane has no flaps unless u meant ailerons.

[@fourgedmushrooms5958]

It has flaperons. Two servos too control ailerons. Apparently with fancy controller you can use as flaps.

[@ArceezRC]

@@fourgedmushrooms5958 I wouldn't expect too much given this is a toy grade plane. If you figure out how to make the 2 ailerons into flaperons w/ the Tx16s, you've done so much more than most have. Yesterday, I thought I set up 3d/6g mode to my Sg switch but then went flying and I did not notice the surfaces twitch when on gyro-stabilized mode so now i'm not sure if it 'forgot' its setting or I possibly never got it mapped to the right channel.. (will play w/ it later).