Rain Bird SR3003 Rain Gun

[@ActNaturally]

Great sprinkler!! Good showing! Like #16

[@photocontrol]

Thank you!!

[@lynnmcbride2425]

Really amazing sprinkler, or Master Irrigator! That base is not going anywhere! With its own pressure gauge too! Thanks Again!

[@photocontrol]

Thank you! Yes the base is very stable with the significant force of the water jet.

[@beebeesfuntasticadventures6110]

A real time saver, looks like it covers a large area.

[@photocontrol]

Yes this one covers about a 200 ft diameter!

[@purnimadas6652]

Wow , excellent sharing..Have a nice day 💐

[@photocontrol]

Thank you, have a nice day as well!

[@NelsonBigGunP200Fan]

Probably one of Rainbird's many different designs for a SR gun. There is the LP2P that is similar except it moves the drive nozzle a certain degree hitting the other side of the drive arm. It does not move the Drive arm at all. There is one there, but the drive arm bearings are really bad. They'd need rebuilt before that gun would ever work properly. The drive arm feels like the bearings have lost most of their insides tbh. I highly doubt that gun would operate like that for very long, I'd say it would try to go both ways or just sit with the drive spoon halfway in the stream.

[@mudnut59]

Thats quite a sprinkler. nice!

[@photocontrol]

Thanks! Yes this can sure irrigate a large area in no time!

[@Shimizoo32]

Great share😄👍✨

[@photocontrol]

Thank you!!

[@JohnCRV]

Back for a look. 👌

[@photocontrol]

Thank you John!

[@NelsonBigGunP200Fan]

There is one of these on eBay right now. I'd think about getting it, but I need to save up to get my P200 rebuilt. I told them to go thru the whole gun. Also I am thinking of reducing it down from a 1.56" ring to a 1.05" (Smallest it can take, Taper bore nozzle). and trying with a shorter suction hose to see if it does anything.

[@photocontrol]

I did see one of these as well. Hopefully your pump will handle the P200 with the 1.05" nozzle, if not you may have to sleeve a piece of PVC pipe to reduce it a little more.

[@NelsonBigGunP200Fan]

@@photocontrol I could just go to a hardware store, take the original ring with me and then try to find one thats close to .90 or so. I bet i could find one.

[@photocontrol]

@@NelsonBigGunP200Fan True, that would be best to take it along to find the best fit.

[@NGUYỄNSƠNMIỀNTÂYVlog]

hi share the automatic pressure sprinkler system is so cool i like it a great video

[@photocontrol]

Thank you!

[@DriveShaftDrew]

impressive bird

[@photocontrol]

Thanks Drew!!

[@imamtaufik8456]

Good job . Bosss.. can you give information about pump to type ? Thanks🎉

[@photocontrol]

Thank you! The pump is a 2 inch inlet and outlet with a 7 horsepower gasoline engine.

[@JohnCRV]

This is very fancy and looks like a long lasting product. 👍 Question; what model would you recommend for underground popup application. I need to replace 4 plastic popups. Thanks.

[@photocontrol]

Thank you John! Yes these large irrigation sprinklers are very durable! I would recommend the Rain Bird 1804VAN, they seem to be decent pop-ups for an adjustable fixed spray of 8 to 15ft. If you require a greater distance, the Rain Bird 12SA series can reach 13 to 18ft. These come in an adjustable model (12SA-RVAN) , also quarter, half and full circle models.

[@JohnCRV]

@@photocontrol Thanks for the advice. They work really well.

[@photocontrol]

@@JohnCRV Great to hear that!

[@NelsonBigGunP200Fan]

Does this allow you to change the position of the drive spoon to make adjuatments for speed ?

[@photocontrol]

No, it mounts in a fixed position only.

[@NelsonBigGunP200Fan]

@@photocontrol Ohh i see. I see these pop up on ebay sometimes. I thought of getting one but theres a few FR that Rainbird makes i want to get first. the 105C and the 1005M. Then i might try to find the 105FP (dual drive arms). That one is neat too.

[@photocontrol]

@@NelsonBigGunP200Fan Hopefully you can find the ones on your wish list! I haven't seen any good prices on bigguns lately, all are pricey.

[@manolomarquezpalomino8492]

Tienes un vídeo de cómo desmontar un cañón y que lleva por dentro

[@photocontrol]

No, no tengo video en este momento desmontando el cañón.

[@NelsonBigGunP200Fan]

Very nice end gun. I wish i had a bigger pump to run my 205G. It's a shame that komet makes rain birds guns now. Rainbirds design is pretty neat. They have one with dual drive arms too. Yours gets the distance! I want some of the older rainbird guns that are fast reverse

[@photocontrol]

Thanks! Hope that you can find a larger pump that's not too pricey. Yes that's too bad Komet is making the guns now, when I was trying to find some parts I got a quote on a XLR for curiosity, it was about $1500.00 plus tax sheesh! I wouldn't mind an older fast reverse RB as well.

[@chandregowda4510]

Good morning it'is good one. Please let me know, whether it can be installed in my agriculture land of. 630ft length and 190ft width.. BOREWELL Of 2inch water pumps from 400ftdepth by 6HP pump. Can you please suggest me the best Rain Gun . Land situated nearby Mysore.. please inform without fail to my whatsup

[@photocontrol]

Good morning, thank you. It seems like you have adequate water supply and pump to operate this type of rain gun. You would need a 50 to 60 gallons per minute of water available from well. The watering distance will work on your size land but rain gun would have to be movable to cover land completely. The Rain Bird XLR is a good irrigation gun as the SR3003 is no longer made. Other model like the Nelson SR100 are also good and watering area can be adjusted to part circle as well.

[@pillavijaykumar3962]

How much hp motor needed for this rain gun

[@pillavijaykumar3962]

And price of the rain gun

[@photocontrol]

This rain gun is operating with a 7 hp gasoline engine water pump.

[@photocontrol]

@@pillavijaykumar3962 They stopped making this model, but newer versions are about $800 or $900 US dollars.

[@jeevajeevitha4766]

Price details