Raitool™ 8 In 1 Mini Multipurpose Machine | Metal lathe machine | Part 2

Buy 8 in 1 Machine here bit.ly/3ZYn4m5
Contact us
Email: [e-mail]
FB Page : bit.ly/3pWPlWZ
Support us
www.paypal.com...
Raitool™ 8 In 1 Mini Multipurpose Machine | Metal lathe machine | Part 2
Related Videos
1. How to make DC motor at home , homemade electric motor easy
• How to make DC motor a...
2.How to create robotic at home , Homemade small robot 2017
• How to create robotic ...
3.How to make soldering iron using lighter
• How to make soldering ...
4.How to make scrill machine at home using spray can and small motor
• How to make scrill mac...
5.Homemade a small and fast car for kids
• Homemade a small and f...
6.How to make 220V solinoid engine at home
• How to make 220V solin...
7.How to make super transformer at home
• How to make super tran...
8.How to make foam cutter at home
• How to make foam cutte...
9.How to make mini grill stove at home
• How to make a mini gri...
10.Free energy device
• Free energy device new...
11.Boost converter using small NPN transistor and 1.5 V AA battery
• Boost converter using ...
12.Motor as generator 2017, Homemade generator from DC motor
• Motor as generator 201...
13.Motor as generator , Homemade motor generator from old vcd player
• Motor as generator , H...
14.Motor as generator from small motor, Energy of small motor homemade 2017
• Motor as generator fro...
15. How to make scrill machine using 12V DC motor very easy , homemade scrill tool 2017
• How to make scrill mac...
16.V3 Solinoid engine whit 3 7 V, A powerful machine made in 2017
• Video
17.Wireless Electricity Transmission Review made in 2017 , New Project 2017
• Wireless Electricity T...
18.How to make electricity wireless transmittion 2017 step by step
• How to make electricit...
19.How to make Easy motor at home 2017
• How to make Easy motor...
20. Phone charging using small battery
• Phone charging using s...
21.Free energy , from small to a powerful energy, Phone charging using 1 5V AAA small battery
• Free energy , from sma...
22.How to make a powerful air pump at home very very strong
• How to make a powerful...
23.How to make 3V Battery from coopper wire
• How to make 3V Battery...
24.How to make mini Hydrogen Generator at home very easy
• How to make mini Hydro...
25.How to make an Electricity Generator from old HDD motor
• How to make an Electri...
26.How to make a mini flashlight 5W
• How to make a mini fla...
27.Amazing life hack , Easy way to cut roof (Zn panel) using wire
• Video
28.My Electronic lock desk , new idea created in 2017
• My Electronic lock des...
29.Free Energy , Homemade Free Energy Device From Syringe And Water
• Free Energy , Homemad...
30.Free Energy , Free Energy from magnetic, magnet motor 2017
• Free Energy , Free Ene...
31.Free Energy , How to make solar cell from LED, LED Vs Solar cell, homemade 2017
• Free Energy , How to m...
32.Free Energy , solar energy, capacitor charging LED as solar cell
• Free Energy , solar en...
33.Free Energy, Solar Energy, homemade easy solar cell 2017
• Free Energy, Solar Ene...
34.Quad motor helicopter Vs Single motor helicopter, homemade mini helicopters
• Quad motor helicopter ...
35.How to make V2 water pump at home , new model of water pump 2017
• Video
36.How to upgrade 3v DC motor to a high speed and strong motor
• How to upgrade 3v DC m...
37.How to make a mini water pump at home very easy, Homemade 2017
• How to make a mini wat...
38.homemade easy motor from CD panel 2017, a strange motor for 2017
• homemade easy motor fr...
39.ir remote control testing up to 40 meters range, homemade ir remote control without any ic
• ir remote control test...
40.High voletage capacitor, super capacitor , how to charge capacitor
• High voletage capacito...
41.Super motor , homemade easy motor 2017 , new idea to create motor
• Video
42.Free energy, solar copper wire, new idea to create solar cell
• Free energy, solar cop...
43.Very small battery, how to make a small battery at home very easy
• Very small battery, ho...
44.Homemade scrill machine very easy 2017 , a powerful tool
• Homemade drill machin...
45.homemade coilgun , a powerful coilgun 2017 part 1
• homemade coilgun , a p...
46.Homemade coilgun, a powerful coilgun 2017 (part 2)
• Video

[@BrightBlueJim]

Just seeing how far off-center the center drill was, and then seeing the whole machine flex until it "worked" tells me everything I want to know: absolute toy, and not even a good one. I can't imagine this leading to anything but utter frustration.

[@DowneastTackle]

i was thinking the same thing

[@Make-Asylums-Great-Again]

There is a center?

[@davidorf3921]

I think the center drill was probably ok but the length of brass rod was not mounted properly in the chuck

[@shivamovatt3984]

Love from India Mumbai

[@hg2.]

These need some "I'm a Machinist"-type kit projects for garage machinists to work on. (And some videos to show how-to). Seems like something Little Machine Shop would be interestedin.

[@MuhammadDaudkhanTV100]

Cool working and good fun

[@กกกก-ฌ9ฉ]

Raitool™ 8 In 1 Multiplepose Machine ( Powerful Metal Lathe Machine )

[@MuhammadDaudkhanTV100]

Fantastic idea and cool content

[@0623kaboom]

the idea is a great one yes ... the execution here ... may as well get a fishing rod some twine and a 2x4 and make yourself a pole lathe

[@technicalkashif1585]

Nice 👍👍👍👍👍👍👍👍👍 video

[@Rakib__738]

Bhai please may apki pay partahu

[@sobreviventealpha1106]

Perfeito parabéns!!

[@dunydesignsCamarasyMas]

Omg it have the same precision like a cow in a cristal shop.

[@CutlassOutdoors]

I owned one of these. It was a complete toy and I was never able to make anything useful with it. The 3 jaw chuck had so much runout that it was basically useless. The whole setup had so much deflection that it was basically useless. It was useless.... I cannot unrecommend anything as much as this.... it was garbage.

[@atastycloud]

Yes I agree but if you modify it, it does work. I have one and I initially wanted to refund it but I could only claim half at best so I kept it, modified it for the span of a year as I was at uni and could only buy parts of I had the money and now it machines hardened brass, 6061 t6 alu is easy, now that I've geared the motor by making a gearbox for the 895dc motor I'm using, with a decent power supply of 24v 15a, it provides it sufficient torque to machine soft metal and the finish it leaves is pretty good. I added more supports using at bar aluminiums which reduced tool deflection. Added an automatic feed using geared motor so the finish is not rough. To date, it works as a lathe, 4 axis vertical, horizontal milling, drilling, cutting and sanding. I am about to upgrade the motors into a 997dc motor which outputs 25kgcm torque even without gearing

[@TheFreak111]

I have the same experience I'm afraid. It is wobbling around so much it is useless.

[@70interestelar]

I am sooo agree with you my friend. This lathe is useless. I have one and its only ornament in my desk. The motor is a piece of s%it. And the plastic is easy to break. To use this crap you need to modified a lot of things.

[@merlitovillagraciajr9098]

How much you buy that machine sir?

[@CutlassOutdoors]

@@merlitovillagraciajr9098 I don’t remember. Something like $125-175, maybe? It was a long time ago.

[@AsitShouldBe]

when precision is an option.. then you can buy this

[@moral64]

That piece is a Tool to find the center of the stock material . put it to one end scribe a line and spin the stock and scribe again until you find the center

[@ugikprs]

Very nice

[@danallansarthou7]

Do simple 8 in 1 lathe machine, Simple as metal scraping?

[@Psicodelicofb7777]

Where did you buy the drill bit holder for the lathe?

[@khalidmahmud3235]

Very good and I like your machine.

[@tigerjet1260]

Are the bites to be attached to this bite table included in the kit? Also, does it come with a center drill?

[@valtersouzaribeiroribeiro9534]

Good good

[@amir.n3149]

Nice

[@marcdaslama]

How to you adujst the high of the toolpost?

[@royal_kolhapurkar_96k]

How to geting this mini lathe

[@electroniquepassion]

👍

[@madbass641]

Scusa il mandrino ha il foro passante?

[@creators790]

what is rechargeable?

[@daniloapdian5092]

how much is the cost of this item? i want 1 of it.

[@exziteplays0001]

I spend my most of time in "recording", "gameplay" and editing and uploading. I need all my brother's and sisters' support. 🙏🙏🙏🙏

[@0623kaboom]

BK needs workers ... so does MCd ... perhaps Arby's ... wendy's ... KFC ... local pizza joint

[@0623kaboom]

ok the lathe at the very start was struggling every cut .... seems it needs More Power

[@0623kaboom]

made it half way before I got disgusted with the poor quality of the parts ... I wouldnt even buy it as a joke gift for a guy who has every tool known to man ..

[@arinov77]

The key word is “patience”, i think you give too much pressure while cutting, as this is a mini machine, you must do a light pressure

[@dipakbharali6615]

Sir is any magnetic Chuck suitable for it? I need .4mm×.5mm cut in .8mm thick round ms washer in the end. If possible I like to buy one of it.

[@ragavaragava8390]

I want machine,rate &purchase place,cell number ?please

[@SamFBM]

whats the diameter of the chuck ?

[@atastycloud]

You can reverse the chuck jaws and holds 50mm max

[@stephengiacobozzi7785]

EU plug not going to wok in USA

[@eltonabreu2197]

Alguém tem o contato desa inpresa de venda de mini torno

[@RiyazAhmad-fe3nv]

How to buy this one

[@ITSMYBSNLDINESH]

Price can you share please

[@thanakit2511]

price?

[@samaransari7435]

Hello

[@cheapmod]

other videos seems this machine is crap

[@vanoustia]

siqdir

[@abanideka1953]

American tech ko ban karo KZbin,yeh milke hamko gadha bana rahea hea.Triggered insann please roast him😭😥

[@70interestelar]

This lathe is useless. Only a ornament in my desk.

[@김이종-e1z]

아주조은제품임니다 제품구입할수잇음니가

[@terryglenweaver]

$185 & Plastic & Tiny & non-precision.... WTH. It is worse than an 8 Mode Headlamp I hot... not bought as even 5 modes requires far too much clicking about and less than 4 modes is always my 1st priority. 8 modes ? ? ? Are the absolute Nuts? And yet that lunacy was less than $20... However here is a &185 USD. Paperweight in a time where were have been phasing out paper... but still... Crazy is on the rise.

[@milanivancevic6217]

machine shit

[@kartikaysharma3509]

Is is this machine so expensive 🤣, 10,000 dollats omh

[@atastycloud]

This is 90 dollars at aliexpress, how did you get 10000?

[@arinov77]

Im curious, is there any possibility to modified for optimal precision? Eg : change jaws hook with true metal not alloy. I dont want huge machine in my small home, im not proffesional, just DIY hobbist antique clock that part mainly from a brass

[@woozhi9218]

I think you need a bigger hobby lathe this aint gonma cut your gonna appreciate the precision and rigidity

[@juancarloslopez688]

Sure You can, there are many different accesories to upgrade this lathe in Amazon, AliExpress, Banggood. Of course this si NOT a professional tool but You can make very interesting things. If You have the time and dedication You can fine tune it and make it a very precision tool. I have the metal 60W 5 Amp version and it really rocks for me. Many owners of this lathe get frustrated as they think it Will work flawless right out of the box and this is FALSE, as I mentioned before You have to invest time and patience to make it work perfect.

[@terryglenweaver]

Price ? Purchase Area? Can it cut very fine threads. (Like Rifle Scope Threads)

[@Mtmonaghan]

I take it your American? Gun mad.

[@JohnJones-oy3md]

As of today (10/01/2020), $185USD shipped (to the US, from China)

[@AYUSH-lc6bn]

Please make link in India rupees

[@MarioZanchet]

I have one of this. Is ideal To nylon only

[@MuhammadDaudkhanTV100]

So super nice work

[@masalahkamu9733]

Try to make keyfob gun

[@cet_froz2249]

Coooooooool

[@Esoocelik]

Reference Axis wrong firstly. This machine useless

[@kelvinchow3663]

Sorry to say , it is not American Tech, nor it is not Chinese. The original design is from Unimat

[@alphacat4927]

Any one else laughing at the American Tech text they have on the screen as if anyone is going to believe that shit.

[@GoldJewellery311]

Price this machine?

[@kanhugouda2932]

Indian price plz

[@gokuls8922]

Can anyone please tell me what music is that???

[@dineshkumarbatham1900]

Sare let machine kahan milegi aur kitne paise Ki Hai Kitni price hai mujhe bhi chahie Mini let machine

[@meiboy6496]

សួស្តីបង​ តើបងជនជាតិខ្មែរមែន ខ្ញុំចង់ទិញឧបករណ៍ដែលបងធ្វើរួច បានដែររឺអត់

[@lenmajuskin]

truely worth the money.

[@samaransari7435]

Want to purchase

[@lawrencelewis1036]

Absolute junk!

[@risdiyanto8906]

How price

[@lucifertushar6619]

Buy link

[@abdulkhan6563]

Thanks

[@manognyareddyallepu9311]

A

[@kk2ak14]

Looks powerful

[@mamidinaresh4053]

Aluminium copper iron

[@sjd4343]

Wow price place

[@talibnaseer3304]

how much in Pakistani currency rate.

[@0623kaboom]

save your money ... get a fishing rod a 2x4 and some good twine ... make a pole lathe ... it will do better work than that little POS ... heck it doesnt have the power to even cur BRASS properly ... he had to put the largest gear at the bottom just to get the torque to cut brass ... and then it was being cut so slow that it started to jam too ...

[@oliversjmildmay2970]

Looks Pretty Good

[@Dineshkumar-nt7wm]

How We can purchase it

[@Mikesmeyer88]

Ebay they have that junk all over. Even with cnx

[@didiksidik2410]

How much money is a lathe.?

[@didiksidik2410]

Berapa harga mesinnya?

[@bangson1345]

Kakean iklan omm

[@arinov77]

Opo mudeng mbok lokne Om, hhhhh....

[@TheBrandon164]

MAN! Nice music!

[@anesioanderlinanesio1106]

quero saber onde comprar estou confuso ok

[@BrightBlueJim]

Love how the video cuts, one frame before the tool holder hits the chuck. Would love even more to see the rest of that clip...