RAM 5TH GEN CREW CAB 1500 BEHIND THE SEAT SUBWOOFER PACKAGE - Installation Video

[@MyPayPro]

@ 3:25, He uses the "Hawk Tuah" to remove the carpet... 😂 Video way ahead of it's time.

[@Netaudiowf]

We're trend setters :)

[@Grateful.For.Everything]

Nicely done! Really wanted to hear actual audio of the sub, had my headphones on an everything lol 😒

[@shaneswails1688]

That is a great little amp. Replaced my Audiocontrol amp. Doesn’t take much gain coming off the Harmon sub signal. Just a hair or so.

[@JesseGibbs-z2e]

very nice excellent work tho just kind of curious but with the fuse setup for power why not use a circuit breaker instead so that you never have to replace

[@Netaudiowf]

Ideally, a fuse shouldn't have be getting replaced on a regular basis. If you're regularly blowing fuses then you have some bigger issues. And circuit breakers are great, in the right application. But constant tripping and resetting breakers takes a toll on their contacts and they do have a life cycle. Not to mention they are significantly more expensive. So for this application, we prefer to use traditional fuses.

[@bleezham]

Do you have a short instructional for the sub/ 4 channel AMP package? Where you would have the 3 plugs on the harness as well as speaker cable and PCA RCA output? Specifically how to connect the harness, what RCA cables= FL, FR, BL, BR, how to set RCA gain, and color codes for wires?

[@Netaudiowf]

I do not, sorry. Sounds like you're wanting a walk through for a full system replacement, right?

[@Netaudiowf]

@@user-ym4vf9dr9f I wouldn't be able to make a video without someone coming in wanting that specific thing. We can sell you a harness and the parts needed to make it plug n play, but I couldn't help you with a how to video.

[@Netaudiowf]

@@user-ym4vf9dr9f since you have Alpine, you will have to use the Pac AmpPro to get you the signal for the new amplifier.

[@Netaudiowf]

@@user-ym4vf9dr9f There is no full range signal in the truck other than behind the radio but the volume knob on the radio won't allow it to turn up or down. So the high level input is great, but you don't have any usable audio signals in the Jeep for that amp to use. Here is an article about how it works. You really have no choice but the AmpPro. netaudio.com/lets-talk-dodge-alpine-audio/

[@Netaudiowf]

@@user-ym4vf9dr9f For tapping in a subwoofer, that works fine, but not for a full range 4-channel amp.

[@dima-9646]

Great product! Will it work with 2500s Laramie? Is there a way to upgrade subs and at the same time to keep ANC ?

[@johnnypiper1717]

Awesome video, can't wait to get my custom net audio anc/loc wavetech harness‼️💯

[@Tech-gc8tt]

This is what I’ve been looking for! Thank You. 🤗

[@Netaudiowf]

Glad we could help! Hollar if you have any questions.

[@gray_wolverine63]

Very nice job. Thank you 🇺🇸👍🏼

[@Kiwi-ot3wz]

Right beside your self tapping ground install at 11:50, there is a threaded hole and two taped holes that i assume are also threaded. Much larger and more solid ground point because its for seats or belts right. So im curious why running a thread tap through to remove paint, wouldnt reveal a better heavier duty ground point, and why you dont use it.

[@Netaudiowf]

We know customers who have used the stock grounding points in these trucks and have had issues, so we recommend making your own ground so that you know it's condition and capabilities. Plus, if you ever DO have issues, it makes it easier to troubleshoot because it is one less thing to not worry about. And, on these Ram trucks, sometimes the threaded inserts aren't as secure as you would think. We had a brand new Mega Cab here, literally 7000ish miles on it, and we pulled the back seat and one of the retaining nuts that is "welded" to the floor bottom came undone just from us pulling the bolt. It made that nut free spin and we had to grab it from the bottom instead of it staying attached to the truck. So you don't know the condition of their connections. What you may think is a great piece of metal, may be a nut with two crappy tack welds holding it on place.

[@derrickswiler7290]

Can yall make one for 2 subs behind the seat? I dont have etorque so theres no battery pack back there

[@Netaudiowf]

We have the dimensions but want a truck here to test fit in before making it public.

[@markminott7913]

How fast can you ship it out?

[@Mastatater1]

Any news on the 2025 Ram install. I have a Limited.

[@Netaudiowf]

We have info, and in short the behind the seat area is completely different on the 25s. More modules and computers in the way. We're thinking we can do something where eTorque goes but we're going to need a truck here for a bit to do some experimenting on.

[@breakfree4177]

Can you show where you ran the remote wire? I’m assuming it is for a control knob. Where do you recommend mounting/running the wire to? Also, will you have recommended amp settings for both your ported and sealed box options. Lastly, will you be making a video of the set up/wiring for the extra 4 channel amp set up?

[@Netaudiowf]

The remote level knob cable gets tucked into the door sill and ran to wherever you want it. That's why we didn't go too much into detail with it. That sub knob is a touchy subject and everyone has different preferences and ideas on how it should be. Some want it right next to the console, some don't want to see it at all, some don't want holes or modifications. So it's up to you and the trim package of your truck. On some trucks, there is a trim panel over on the left side of the dash that is easily removable and you can mount it there without worrying much about ruining something that can't be easily replaced. That's one of our goto places.

[@mikecolles8907]

Any thoughts on an update to this design yet? Wavtech has some really nice new 1000.1 amps and thier new thin line 12 inch sub that only needs .6 feet. Seems like it might be a great combo.

[@Netaudiowf]

The new series of amps are thicker than the minis so they will limit the seat folding up as far. If you have recline, no issues.

[@flightmedic7169]

I have two JL tw513 on a ford and need them on a dodge ram 2019. Have any info on where I can get a box for those ?

[@Netaudiowf]

We can fit them under the back seat, but not behind the seat. We have all sorts of options on NETAudio.com

[@pkontoslight]

I have 2020 bighorm 8.4 non nav base system with i want to add this with 4ch for the suround.

[@Netaudiowf]

We have that as an option. We have integration options for your truck for just adding the subwoofer or also adding the 4-channel amp. All plug n play.

[@pkontoslight]

@Netaudiowf well you will def be hearing from me next month when I buyout my lease for this system!!!

[@Netaudiowf]

@@pkontoslight Sounds like a plan.

[@Jackal_Blitz]

So if the truck doesn't have the eTorque battery, is that spot behind the driver's side seat just flat metal? Just curious if that would be a good spot for other accessories while you already have the seats out.

[@Netaudiowf]

There's a lot of room on the Driver's side behind the seat. We're working on another enclosure to fit in that space, too.

[@SuperSaiyanX-0014]

I have the alpine in my 2019 Ram, the bass is "okay", but I want way more. With your set up, do you pick the amp and sub (I miss my old Kicker Pro Comps), or do we? And is it a massive improvement from the stock? I'm close to Wichita Falls and would love to get this installed in the near future.

[@Netaudiowf]

Because of the tight space that we have available, we only offer it with two subwoofer options and 1 amplifier. This way we can guarantee the performance of the system and help with the installation and integration simplicity. And yes, it's a significant improvement over the factory system. It's just impossible to get that to show through a video.

[@KelvinTaylor-gu4xo]

So the ground where the e torque is, if you do not have an e torque is that a good ground or no?

[@Netaudiowf]

We don't recommend using that ground, or any of them back there. We have had too many customers call with issues related to them trying to use one of those points back there, so we always suggest making your own ground on the floor.

[@KelvinTaylor-gu4xo]

@@Netaudiowf thanks

[@tarikmilner4450]

Is it safe to leave the etorque battery exposed? does the cover need to be cut and placed back over it?

[@Netaudiowf]

The cover can be trimmed and put back in place, but the cover won't do anything to protect the battery. It is safe if you leave the cover out.

[@tarikmilner4450]

@@Netaudiowf great thanks 👍🏽

[@michaelwells18]

Ive been looking for something like this. I currently have a fox box with 2 12s under my seat but i want my under seat storage back. How soon before the 2 speaker setup is available?

[@Netaudiowf]

Until we get a truck locally wanting to do it, we won't be releasing the double enclosure. We have a design, but I want to verify it on a truck before we start shipping stuff out. So, no promised time for now.

[@bleezham]

Where did the base knob end up? Any video for that location ?

[@Netaudiowf]

Everyone has different needs and opinions on bass knobs and they're typically going to require modifications on the dash if you want them discreate. In this application, we took the remote apart and mounted it in the panel below the headlight switch and above the ebrake. That panel is easily removable and normally has plenty of space to mount a subwoofer knob. We also tend to take them apart and mount them facing downward in the trim panel that covers the gear selector knob, but that is a more involved.

[@johnnypiper1717]

Nice video, so if my truck is the non amplified sytem no stock amp or sub and i add my subs and sub amp should my lpf and subsonic be set a certain way to get the best output since the since my signal is limited? Or aslong as i feed my amp the biggest signal possible it can handle i should be good with my sub sonic set at say 28hz and lpf at 80hz

[@Netaudiowf]

With a non-premium system, the amp is getting a full range signal from whatever you tapped into on the truck, so setting it like you have it is fine. The only time to run it wide open is if it is being tapped into a factory woofer.

[@johnnypiper1717]

@@Netaudiowf ok cool well I bought the harness/anc by pass along with the wavetechDQ from you. So I'm all good. Gonna try moving my box around see if it makes some difference but seems my q class 8s and the ported box I have them in which is 1.4cu net 4" aero falls off big time after 33hz that I'm tuned at and doesn't pick back up til like 48hz big dead spot from 35hz to 46hz like my subs aren't even moving and I jus hear bass coming out the door speakers

[@Netaudiowf]

@@johnnypiper1717 Hmm. Sounds like something is cancelling in there. Try unplugging one RCA from the amp and see what happens.

[@johnnypiper1717]

​@@Netaudiowf you happen to know the colors of wires that should be landed on my wavetechDQ like from left to right on the speaker level input?

[@Netaudiowf]

@@johnnypiper1717 solids are positive, stripes are negative. Left to right doesn't matter for a sub on a mono amp.

[@davidwands5395]

Im confused, or maybe it was left out of the video. You guys mounted the speaker and amp behind the rear seats , grounded it , then connected the ANC bypass, then ran the power cable to the battary with the fuse. I saw all that but where are you connecting the rca's or what ever your connecting to in order for the amp to get sound thru it. If im not mistaken , there is no need for a hi output converter becuase the amp kicks on once it senses sound coming thru it. I am assuming it is the plug that was in the harmon system by the seat belt. But what if you didn't have a harmon system or any stock sub at all. Then how would it connect?

[@Netaudiowf]

​@davidwands5395 we make plugs that plug into the subwoofer signal at the stock subwoofer behind the seat and we are feeding that into the amp high level. No need for a converter and extra cost of it and RCAs.

[@jlmrule336]

Will this work on the 5th gen quad cab as well? There is already very limited space and I have a kid and dog. Hopefully this will be the answer to my problem.

[@Netaudiowf]

Sorry, it will not work on the Quad Cab, only the Crew Cab. There is very little space behind the seat of the Quad Cab trucks.

[@gizmonova]

So can I keep my ANC system? I have the Limited HK system

[@Netaudiowf]

If you're changing anything on the audio system, you will need to bypass the ANC system. Most people don't find that much of a difference with it off vs on.

[@armandosuarez5460]

Nice system is there a way you can send a brochure

[@Netaudiowf]

I don't have a brochure, but we have a website listing for it. netaudio.com/product/2019-up-ram-5th-gen-crew-cab-1500-behind-the-seat-audio-package/

[@pt18777]

Brochure?? 😂

[@dougblevins6480]

Where is the 12v remote turn on ran to???

[@Netaudiowf]

These amplifiers have auto turn on so they turn on automatically when they see audio in. So no need for an ignition source.

[@ralphealking4071]

Do you have a setup like that for a 2014 ram 2 12s possibly?

[@Netaudiowf]

For under the seat, absolutely. But not for behind the seats. There is barely enough room for amps back there.

[@Geneflow02]

Do you have anything similar for a 2022 Ram 2500? I recently "upgraded" the stock sub to the Pioneer, but it leaves a lot to be desired. I'd really like something like this, plug and play, for the subwoofer in a 2500. Thank you!

[@Netaudiowf]

We offer all sorts of packages for those trucks. The 3rd-5th Gen body of Rams is what we became known for online. And we can absolutely get a plug n play bundle made up, but it won't go behind the seat. There isn't enough room for that. kzbin.info/www/bejne/hIuTfGybnaqlntk

[@Rob-Hannon]

Any plans for gen 4 or classic rams?

[@Netaudiowf]

We already have a ton of options for those trucks, just not any enclosures for behind the seat. There isn't enough room for that. netaudio.com/store/product-category/dodge-ram/2013-19-dodge-ram/2013-up-crew-cab/1-subwoofer-boxes-2013-up-crew-cab/

[@tomk3635]

Looks great

[@itsjustWebbie]

Do the non-limited 1500s have a seat back release?

[@Netaudiowf]

They do not, you'll have to unbolt the seat. It's only a couple bolts, not anything terribly difficult.

[@jayfox5]

Will this work in a 2024 big horn with no factory sub. And i would probably need a Line output converter also correct?

[@Netaudiowf]

Yes it will work, and when you select the options that suite your truck on the website, it will come with all the parts and wiring for your truck's audio package.

[@dougblevins6480]

I have a Skar 1500.1D. I dont believe it turns on like that. So Im guessing I have to run that 12v rem to a 12v swith accessory fuse location at the fusebox under the steering wheel? I have an APH-CH3 to bypass ANC. But im not getting where to wire the line output converter? Do i wire it to the sub behind the seat? (I have the Alpine system- 2021 Ram Laramie).

[@Netaudiowf]

We don't use the APHCH03, we use our own harness that plugs in at the stock subwoofer. It's doing the same thing, just fewer parts and a simpler assembly on the part.

[@OscarMenaVlog]

Can you tell me what base you used for the rear camera? I had never seen it centralized above the moving glass. thanks.

[@Netaudiowf]

That was installed by the customer before we got hold of the truck, so I don't have any information to help you out. Sorry.

[@bobbybrooks5846]

Can I do behind the seat and under the seat subs

[@Netaudiowf]

You could, but normally simpler is better for output. If you're wanting loud, I would just focus under the seat.

[@bobbybrooks5846]

@@Netaudiowf Will the factory sub still work with the under seat system

[@Netaudiowf]

@@bobbybrooks5846 it can, but I wouldn't recommend it. When you're adding multiple subs in different locations like that, you tend to get some cancellation issues. I would never leave the stock woofer connected when adding aftermarket.

[@bobbybrooks5846]

@@Netaudiowf Ok I need to speak with you to get the ball rolling

[@Netaudiowf]

@@bobbybrooks5846 We're currently closed, but you can call the shop tomorrow and we can go over some options together.

[@ryanwilson8630]

What if we don't have limited. How get seats down

[@Netaudiowf]

You will have to remove the seat to get to the back wall if you don't have a limited. That's covered at the beginning of the video, it isn't hard and is just a few bolts.

[@Skinner32608]

Hello. Do you work on GMC trucks? How do I get in contact with you guys? I have a 2016 GMC 2500HD that I'm looking to improve.

[@Netaudiowf]

We sure do. You can shoot us an email at [e-mail] or call the shop at 9407671800.

[@johnjackson6904]

I'm in nyc.. how can i get u to install mine.

[@paulmorgan3790]

Sorry, that's a heck of a commute. But I know we could fine a shop near you that would be able to do it for you.

[@Skinner32608]

​@@paulmorgan3790 I'm looking to have my truck done as well. How do I get in contact with you?

[@LouieCervantez]

How much do you charge for this box

[@Netaudiowf]

That all depends on the configuration you choose. netaudio.com/product/2019-up-ram-5th-gen-crew-cab-1500-behind-the-seat-audio-package/

[@beekeeper8474]

The price is a killed it for me

[@Netaudiowf]

I'm sorry that you feel that way. It's name brand equipment in a very custom enclosure, so the price reflects that.

[@KelvinTaylor-gu4xo]

What was the max volume number before clipping on this truck?

[@jblaze114]

just took out seat and liner and theres no sub. 20 1500 bighorn crewcab. theres no connector either at this harness, guess i gotta run new wires now.

[@Netaudiowf]

We have harnesses for all audio packages to make it plug n play. If you have the ANC system with 6 microphones in the headliner then it's still a very simple installation done without having to remove the radio from the dash.

[@marcomalo02]

Or..OR...a great spot for an AR15.

[@Netaudiowf]

Well, I'm not opposed to that, and have built gun racks before.

[@marcomalo02]

@@Netaudiowf My hero. God bless America.

[@donearl6675]

[@rignacio1]

camera man sucks. doesn't know how to aim camera.

[@idontcaresapo8233]

You guys didn’t flash the radio equalizer

[@Netaudiowf]

Flash the radio equalizer?