Not a great vid but I didn't think this would work so I made this on the content I had available to me. Sorry! Software - www.alfaobd.com/ Interface - www.amazon.com/dp/B07JFRFJG6?...
Пікірлер: 122
@thomaspickens42136 ай бұрын
I put my truck in tow/haul. Left it in first gear. Drove a cpl mi at 2,500 rpms. Cleaned right up. Thanks for the info... that made me think of tow/haul mode and shifting
@SteeveeDan6 ай бұрын
I tried that but it didn't work for me so I didn't bother mentioning it. Glad it worked for you though!
@mikeforan84129 ай бұрын
Great post! My EcoDiesel went from 80% to 100% - See Dealer while traveling at highway speeds on an interstate. Followed your recommendations, bought the device and software. The first two times I ran the regen program it still said see dealer. Ran it a third time and filter was cleaned to 0% 😅 and the check engine and other codes went away. Well worth the $200 investment. Thanks again.
@SteeveeDan9 ай бұрын
Glad it worked for you. If I didn't get rid of my Eco, I would have kept the tablet and interface in the truck at all time in case out of the blue it needed to be done on the road.
@jargero82035 ай бұрын
It came back a few weeks later didn't it? 😢
@alexandramoon1703 ай бұрын
Where did you order it?
@TylerSmith-sj6rk7 күн бұрын
@@jargero8203no
@kylebirkenfeld428 Жыл бұрын
I just had this happen on Friday. First issue I’ve had. I have a GDE hot tune and never had an issue. I was in a middle of a tow and about 200 miles from house and luckily I was a few miles from a dealer. What they did was the same as you was a forced regen and got me going. I had the same codes and I found I werid and wonder why it happened. My GDE gives me a message when it’s doing a regen and what happened it never moved from 80% down but rather have me the message to remedy at Highway speeds. Then went to 100% and put me in limp. Thankful for the dealer and didn’t cost me anything since I have the AEM. Post if it happens again and I’m really thinking bout getting the alphaobd!
@SteeveeDan Жыл бұрын
It does seem strange that it happened while you were driving. I have to say that I was totally shocked that the AlfaOBD was able to complete the stationary forced regen so the interface and software was worth every penny especially given the fact that if you keep it in the truck you can do this regen anywhere on the road. Unfortunately, I've had enough of this engine/system and am working with a local dealer to trade it in on a hemi Rebel. If the deal goes through, I'll have the new truck this Friday and the Eco will be in the rear view mirror. If you saw any of my other Eco videos, you'll understand! best luck with yours.
@jonathanmaus58116 ай бұрын
Steevee-Got my stuff in today got it all connected and it did the regen and all the codes went away trucks running great. THANK YOU VERY MUCH!! Huge money saver.. Thanks again. Great video!
@SteeveeDan6 ай бұрын
Very glad it worked. I know that feeling when it worked on my truck, it was great!
@abeaguirre334 ай бұрын
@@SteeveeDanhi Im having the same problem with my truck but I can’t figure out how to go the regen
@SteeveeDan4 ай бұрын
@@abeaguirre33 I apologize but I did this over a year ago and traded the truck in the following week once it was fixed so I really don't remember. However, here's a vid I watched back then that helped me, hopefully it'll help you - kzbin.info/www/bejne/oZnZYmuClqecpNU
@ericalexander20283 ай бұрын
Where do i get the softwear and whats the name of the softwear?
@PETEMALDONADO-rc8pf Жыл бұрын
I have to buy what software in addition with the OBD link MX Plus and on the Amazon it shows two connectors ago with it do I have to buy those as well
@SteeveeDan Жыл бұрын
I use the MX plus linker and this software - www.alfaobd.com/
@rcrippen10 ай бұрын
I have a 2018 ram eco diesel. One review of the AlfaOBD said i might need a "bypass cable to make changes". Is this necessary, and what's a bypass cable?
@SteeveeDan10 ай бұрын
A bypass cable is necessary to make many changes in the trucks software. I have a 2017 so thankfully I didn't need one. I could be wrong but I kinda remember reading that the bypass is needed for the body controller and not the engine, again, I could be wrong. Anyway, here's a link to a video regarding the bypass. kzbin.info/www/bejne/mHyqi5p5qpqSe7M
@travelbydragonfly Жыл бұрын
Thanks for posting. I have my truck sitting at the dealership right now waiting for a new catalytic converter. They told the filter was too clogged , regen didn't work, and it needed to be replaced. (it's in the converter) Who knows if they're BS'ing me or not. Anyway, thought I'd pass this on since the repair is $3500. They are doing it under warranty luckily but still they have had my truck for a week and counting waiting for the part. I will be getting that AlphaOBD for sure and watching that particulate gauge like a hawk from now on. It's insane that the filter clogs that easily, and you have to drive the truck 50-100 miles on the highway to have it do a regen. I was wondering, how long does the manual regen take? Thanks
@SteeveeDan Жыл бұрын
I had my 1st check engine light at 19000 miles and it was nothing but trouble after that. The list is long indeed of the times I was without the truck and the months it spent at the dealer. Traded it in last week while it was running well for a Ram Rebel with a Hemi. I Miss the fuel economy of the Eco already but I love the fact that the new truck is something that I can drive whenever I want to, or more importantly, when I need to. Anyway, the forced regen took a little over a half hour with the Alfa software and the bluetooth interface. I recommend the Alfa software for sure!
@isandoval67 Жыл бұрын
It takes 20 minutes to an hour
@SteeveeDan Жыл бұрын
@@isandoval67 Yes, it does.
@alejandrorosales2273 Жыл бұрын
Can you take the ffilter off yourself and clean it or even take it to get cleaned?
@SteeveeDan Жыл бұрын
@@alejandrorosales2273 It is possible, where I work they send out dpf's all the time to be cleaned.
@denhideous6 ай бұрын
So this cleared the service the electronic throttle control? Just checking… I have a 2018 eco diesel, shifting has been funky last week or two…
@denhideous6 ай бұрын
Could this error occur if you run it too low on def fluid I wonder? I’m wondering if that’s what I did…
@SteeveeDan6 ай бұрын
It did clear the service throttle code. Not sure about the trans issue, I never had that. Although when the throttle code was present, it does disable the turbo and it shifted a lot more than normal because of the power loss.
@shjonwaddell93524 ай бұрын
Just happened to my 16 ecodiesel and I drove it until the regeneration message came on then sat in neutral and kept the rpms at about 2500 and it cleaned itself and got a message saying regeneration complete
@SteeveeDan4 ай бұрын
You're one of the lucky ones! Maybe cause yours is a 16 but mine wouldn't regen without some software help.
@BeauBeau475 ай бұрын
I just got all the same codes on my 2017 Ram 1500 Eco. Ordering this now. Hope it works 🫠
@SteeveeDan5 ай бұрын
It really should work. It worked for me and others who have replied to this and some of my other videos. Good luck!
@angelmunoz23755 ай бұрын
Hello. I have the same issue and I got the scanner and software and It went into force regen twice and it did not work. Do you have any ideas of why?
@SteeveeDan5 ай бұрын
If you have any codes try clearing them first. KOEO, clear codes and try the regen again. You have to get the regen running before the code(s) come back so you need to be fast. If that doesn't work there must be other issues with the truck.
@aljamal2924 ай бұрын
Does the door have to be shut? Also do the codes have to go away before starting the regen? Ran it twice yesterday and was not successful
@SteeveeDan4 ай бұрын
I'm pretty sure my door was closed and I've heard the codes need to be cleared prior to starting the regen, mine was done over a year ago and I honestly don't remember. But you gotta be fast between clearing codes and starting the regen.
@ericalexander20283 ай бұрын
I bought the obd link mx+ but its not helping me do what your video says there are no selection for a force regeneration to restore the exhaust system. I feel like i lost my money because just by connecting the obd link mx+ didn't do what i hoped it would do. Or maybe the instructions givin was not complete. So i just delete all the error codes and thats it i can't see that happening
@Faol_SeanАй бұрын
You have to have the right app for your phone/pad. In another video I saw they recommended the Alfa OBD app, the option was in that program.
@cmsstorm94558 ай бұрын
Hello, I bought the software and the link but it has never started the regeneration process, I bought the truck brand new and have never seen that message of regeneration ever. I have 93,500 miles and got the one hundred percent message and the throtle message and the engine link and truck went into limp mode so now do not know what to do. any advice for me
@cmsstorm94558 ай бұрын
after trying in the evening and again in the early am it finally cleared and all is good thanks saved my butt
@SteeveeDan8 ай бұрын
@@cmsstorm9455 Glad it worked out for you!
@jonathanmaus58116 ай бұрын
Is there anyway I could get some help getting this for my truck I’m having the same issue??
@SteeveeDan6 ай бұрын
This is the link for the interface - www.amazon.com/gp/product/B07JFRFJG6/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 This is the link for the software, keep in mind it won't work on Apple devices only Windows PC (OS XP / 8 / 8.1 / 10 / 11) and Android (OS 4.0.3 and above) - www.alfaobd.com/
@jonathanmaus58116 ай бұрын
So for the software link I just click the one where the OBDlink Mx+ one is and download that right ???
@SteeveeDan6 ай бұрын
@@jonathanmaus5811 No, The Obdlink must be purchased from Amazon or any other seller of your choice although Amazon makes it easy. The AlfaOBD must also be purchased from the link I posted.
@chedburton395312 күн бұрын
Hey I found the OBD Link MX+ but didn’t see any software. It looked like it was just the module that linked by Bluetooth to your phone or iPad. Am I misunderstanding something?
@SteeveeDan11 күн бұрын
You need the software on your phone or tablet. It won't work on Apple devices. I bought a cheap Android tablet from Walmart to use for this software. www.alfaobd.com/
@furmans244 ай бұрын
Which app do you guys using? I can’t find how to force regen 😢
@SteeveeDan4 ай бұрын
www.alfaobd.com/ - That's the one I used. Keep in mind it won't work on Apple devices.
@andrewbellard52842 күн бұрын
Have you had to force regen it a second or third time? And if so how long did it take to force regen it again.
@SteeveeDan2 күн бұрын
Truth be told, as soon as I got the CEL off and it running well again I traded it on a Ram Rebel with a Hemi. Had wayyyyyyy too many issues with the eco.
@user-px2ii6hk7h6 ай бұрын
Where did you buy the software, I have the same problem and where can I see the cell phone tablet data?
@SteeveeDan6 ай бұрын
Get the software here - www.alfaobd.com/ Note that it only works on Android, won't work on Apple products.
@petermonfiletto92664 ай бұрын
@@SteeveeDan can I use the app for iPhone it’s alfaobd2
@MarioHernandez-xv2zv3 ай бұрын
Can you please post the link to purchase alfa obd and the obd link +
@SteeveeDan3 ай бұрын
I just added the links to the video description - kzbin.info/www/bejne/fJyzhnV9i9eCo6M
No, as soon as I got the CEL off, I took it to the nearest Ram dealer and traded it on a Hemi Rebel. I had enough of the ecodiesel bull.
@alejandrorosales2273 Жыл бұрын
@@SteeveeDan I was reading in the owners manual that if the regen is not reset that it wont regenerate when it should. At least that's what I'm understanding. 🤔. I just took off my DEF, flushed water through it. Use some Sodium Hydroxide (AC coil cleaner)😁 then flushed with water. I boiled water and flushed out with that too. I still have to clean the EGR tube. Once I'm done; to the dealership I go...😁. Not getting a Diesel though.
@SteeveeDan Жыл бұрын
@@alejandrorosales2273 Totally understand!
@tristanghetes458310 ай бұрын
do i link the software to the obdlink? can i do it through my iphone or does it need a latop
@SteeveeDan10 ай бұрын
The software only works with Android so you'll need an Android phone or tablet. Once you have the software installed it will connect to the OBD dongle when the dongle is plugged into the OBD port and the ignition is on.
@tristanghetes458310 ай бұрын
@@SteeveeDan does the android phone or tablet need to be connected to the obdlinkmx+ through bluetooth?
@SteeveeDan10 ай бұрын
@@tristanghetes4583 Yes, enable Bluetooth and the dongle will show up in the options to connect to.
@tristanghetes458310 ай бұрын
@@SteeveeDan the bluetooth isnt showing up at all, ive tried it multiple times but the obdlink isnt showing up
@SteeveeDan10 ай бұрын
@@tristanghetes4583 Are you using this interface/dongle? www.amazon.com/gp/product/B07JFRFJG6/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 I tried the cheaper one and it wouldn't connect. I sent it back and got this one and it worked perfectly.
@danmiller77783 ай бұрын
What link do I need to buy
@SteeveeDan3 ай бұрын
This is the one that finally worked for me, so it's the only one that I can recommend. - www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_1?dib=eyJ2IjoiMSJ9.5dUKZZu22WICimkkoPKiTCIChGdlMB_sTkOVur0c9OqfWgHftbNSdYKQQ8DzWy4xPCiX-vHuwOestb7RA6We9z458m4p9TmuoNwQi_LJ_Fu0oJdMY4umQS81LEkqNg-iJZX7JAH-sbvdRSwXKuvRIH6800qdzA__qWgMHDG9X2xOV_vighWeHCqL0AsWF2nNDaeDglkDlaGPH3iCARcYasU-u6Glo8fNNadiU4qTLvpp_quMBxn9jupZbXYbihPCckDLtkzRSruoT-5nfKY33yGEubJtsViiYc3GDd5nrHg.sVXQp1a36QLutfV5echb7hMgs61LGz0bBzIVputOjxg&dib_tag=se&hvadid=580648583184&hvdev=c&hvlocphy=9005365&hvnetw=g&hvqmt=b&hvrand=5740991836909166262&hvtargid=kwd-765856020175&hydadcr=7479_13212551&keywords=obdlink+mx%2B&qid=1712095099&sr=8-1
@denhideous5 ай бұрын
Hey, do you know of an app for iOS that can do this?
@SteeveeDan5 ай бұрын
None that I know of that's as capable as AlfaOBD. I went to Walmart and bought a $50 Android tablet to run the software. So far, it's working just fine.
@abeaguirre334 ай бұрын
I got the scanner and I do honest I do not know what to do or even do a force regen
@SteeveeDan4 ай бұрын
I apologize but I did this over a year ago and traded the truck in the following week once it was fixed so I really don't remember. However, here's a vid I watched back then that helped me, hopefully it'll help you - kzbin.info/www/bejne/oZnZYmuClqecpNU
@matthewmccain4 ай бұрын
Once you get this issue resolved delete everything on the truck. If that’s possible where you live. I have 241,000 miles on mine. Mine did this around 80,000 going up north it got super cold a few nights and even with anti gel in the diesel it went into limp mode. Needless to say when I got home and went to someone and got everything removed. Just turbo Back exhaust and EGR block. If it’s possible for you it’s worth every penny. All those emissions on those trucks are hell on the engine. It’s like a you running around with a sinus congestion cold your whole life. Hope it all works out for you.
@SteeveeDan4 ай бұрын
@@matthewmccain I totally agree. Unfortunately, I live in upstate NY and deleting wasn't an option. Anyone else that lives in a free state may consider deleting.
@danielskelton93739 ай бұрын
So u had to purchase the mx+ and buy the software seperate or is that all in one please get back to me asap 🙏
@SteeveeDan9 ай бұрын
Separate - www.alfaobd.com/ and www.amazon.com/gp/product/B07JFRFJG6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
@danielskelton93739 ай бұрын
@SteeveeDan yea I have that coming in today. Exact same one. So I need to let my truck run for a bit to get to 130° in order for it to start the regen I know that much. Then plug that OBD in and turn the truck on and run the regen from my phone?
@SteeveeDan9 ай бұрын
@@danielskelton9373 Yes, but hopefully you don't have an Iphone as Alfa OBD only works with android. You may need to clear any codes then start the regen immediately. I've heard some guys have had issues getting the regen to run with codes in the pcm.
@danielskelton93739 ай бұрын
@SteeveeDan OK good to know and no I'm not an iPhone guy. Android is the only way in my house.....except my wife 😅🤣
For some reason I can’t get it to activate Regen with the check engine light on. I have a 2017 eco. It resets the light and the light cuts back on
@oslayrua64688 ай бұрын
Where did you went in the software to do the regen. Thanks
@SteeveeDan8 ай бұрын
I honestly don't remember as it was close to a year ago but here's a video that may help - kzbin.info/www/bejne/g3Wmh3qsmd2ab80
@paul-ri7mi Жыл бұрын
What software?
@SteeveeDan Жыл бұрын
AlfaOBD
@ericalexander20283 ай бұрын
Did you get it on amazon?@@SteeveeDan
@ericalexander20283 ай бұрын
@@SteeveeDanIt shows me the same device OBD LINK MX+ is that right?
@SteeveeDan3 ай бұрын
@@ericalexander2028 Yes, that worked for me.
@ericalexander20283 ай бұрын
@@SteeveeDan Thank you for your reply. So i only need that device to resolve the exhaust essue. 👍🏼
@cedricjones13673 ай бұрын
I have the same problem with my truck
@SteeveeDan3 ай бұрын
The Alfa OBD software and the MX link solved that problem for me not to mention all of the other capabilities of the Alfa software. Will save you tons of $ instead of going to the dealer.
@thrivalsurvival44297 ай бұрын
Hello
@thrivalsurvival44297 ай бұрын
I'm thinking about ordering. Having same troubles as you. Can you further assist through the network please?