SAVE YOUR INJECTORS! 6.7 Cummins CAT Fuel Filter Kit Installation

[@BEASTProjects]

To those you of you having issues w/ the new fuel lines, we got something coming for you soon w/ Dirty Diesels! Keep watching the channel for updates.

[@macking4942]

What kind of issues are people saying? I was getting ready to buy one of these kits for my 2017 3500....

[@haymaker3046]

Ram BEAST Projects did you have issues with the filter life monitor resetting after the filter mods?

[@BEASTProjects]

Nope

[@haymaker3046]

Ram BEAST Projects I have a 16 3500 laramie sport. I did the cat filter setup and when I went to reset the filter life monitor - it reset the mileage and the gallons used but the percentage meter stayed the same. Just wondered if that was normal or not

[@BEASTProjects]

Yeah, installing the filter kit won’t change the life percentage.

[@yerwrng]

Been running nothing but the fuel filters from the auto parts store for 8 years in my 6.7 and at 194,000 miles I'm still on the original factory set of injectors . You don't need these kits to keep the truck alive.

[@travcon8]

The fuel filters on the newer trucks are better than the older common rail trucks that first came out in 2003.

[@chrisspence3216]

Ya just need to change them at every oil change . For all my filters I use OEM Wix and or Napa and no others also I change my air filter at every oil change or at least blow out . I have a grading tractor business so I’m Always towing 10k-15k lbs and always in the dirt and dust so I change all filters every 7 Factory says ya don’t need to but I do plus I change my oil every 6k-7k miles and use Rotella T6 synthetic Or delvac syn. or equivalent. I don’t see why ya add that filter right next to factory one so now ya have 3 fuel filters ? Two at tank and one at motor ? I drive a 2016 3500 6.7

[@mattjay3679]

Thanks for the info!! My better half found this video and got the kit for me. At first I was a bit nervous about messing with the fuel system but she (wife) was confident in this product. Installed it today and I can already tell the difference in how the truck and fuel efficiency has improved. That’s why we have better half’s. Thanks for passing along the information as it is very helpful . Matt

[@BEASTProjects]

No problem, buddy 👍🏻

[@אתהברטון]

Waste of money...

[@jameypurvis2630]

Where did u get this kit need link

[@stevequate1797]

Love you guys that take the time to show just the smallest detail that needs to be done. Really helps me out so much. My truck has been sitting fir over a year now. Injector went out long story short got screwed by 1st two diesel shops so ran outta money just getting my truck back from quoting what’s wrong, not fixed man they raked me big time, but what can you do gotta get your truck back. I hate diesel shops, then my job overnight shut down no warning a damn good super great paying job, it enough hours in the day to work 5 jobs to make what I was making, then the virus hit to make job finding worse least my field of work. Threw my hands up been living w/o my truck but now gotta get fixed, draining the fuel tank, replacing the pos plastic end radiator(3rd one now was leaking) with a 3 row all aluminum tig wejded radiator old one was 2 row, got new water pump, new upgraded amp alternator, new oil, antifreeze, 2- new batteries what I’m buying next so I can get it to another shop so it will crank over if it will, didn’t buy new turbo hoping old turbo still operates. Need injectors or injector the shops told me if you replace one injector just do all 6, he’ll they cost 1,500-3,000 apiece. I gotta find a affordable diesel shop I can trust, I am scared of them and hate them now. Been raked overthe coals, I live in Keller, Tx if anyone knows a honest to goodness good honest reputable diesel shop please let me know do t k ow how you’d be able to tell me but frustrated as hell

[@stevearrington6886]

Wrong answer fleetgard fuel filters are made by Cummins and the best.

[@CHILLHP]

Hey, I enjoy your vids. Just so you know as it looks like space permits on your truck for future reference, you can use a 1R-749 filter which is about 4" longer than the 750 so it'll provide more filter surface area. Also an even better filter is a 416-1225. It's a UHE (Ultra High Efficiency)

[@BEASTProjects]

I’m actually researching a setup for my 2020 Ram 2500. 🙏🏻

[@CHILLHP]

@@BEASTProjects I’m sad to learn you got rid of your 17. You’ll love the mega cab tho

[@tonyturner779]

I thought about this kit but went with the Fass 150gph kit instead. I still have my in line factory water separator just because I haven't pulled it off yet. You'll get piece of mind with this kit for sure and the block will look lovely with the factory bowl deleted. As always loving the channel and the family. Wish y'all the best.

[@BEASTProjects]

Thanks Big T!

[@andreykoptelev6415]

Thought of doing this until I found that the direct replacement for the rear filter from Donaldson is 2 micron. Wix makes a 2 micron for the front.

[@jet0577]

Where did you find them? How are they and if good I may return this kit? I just got it in the mail today

[@Dyusik]

@@jet0577 WIX is sold at rock auto, Donaldson was found on Amazon.

[@edwardcarberry1095]

What is the Bata Rating of it?

[@fixxxer6484]

I got double filter in parallel, from WIX 2 micron, stock water separator before it, and 2 micron engine filter. I made 71k miles with it, and only replaced, because I run into another issue, so to eliminate thoughts, it was replaced. Usually 25k and filters get clogged, and truck won't move. So I assume it multiplied 25k by 4 roughly and nothing bigger than 2 microns ever make to injectors

[@repairvehicle]

Wix doesn't have 2 microns

[@Troop-qp8wn]

I'll be getting my fleece drop in sending unit today. Alligator performance has the best price.

[@cassiemwells398]

Hello, awesome video what did you do about the filter under the hood tho?

[@williamboone5282]

Trying to find the kit you used when adding the cat fuel filter to the rear of you truck Can you tell me what and where you got it Thanks

[@samuelaviles3852]

I bought that same kit but I have a doubt, the front filter is eliminated because I am about to buy the black market system? i got a 2016 dully ram3500

[@BEASTProjects]

I have a discount code for BMP: beast3 I'm running their rear CAT filter kit on my 5th Gen Cummins now.

[@samuelaviles3852]

After how many miles does the filter needs to be change?

[@repairvehicle]

Why delete filter by the engine? Are you going to have problems with fuel not being heated up?

[@briankummer6537]

Cat filters are manufactured by Baldwin. These trucks have two fuel filters already I don’t see the need to add a third more importantly than adding a third fuel filter is to make sure you’re running a fuel additive to add lubricity to the diesel fuel is more important than adding a third fuel filter just my two cents

[@motocarriersllc7258]

I need to order this for our trucks. We run entirely to many miles to keep stopping mid route to change that trash fuel filter under the hood as often as we do. Plus all the other reasons it’s junk.

[@repairvehicle]

By the way extra filter without extra pressure will starve the high pressure pump from having enough Diesel fuel. Basically with extra filter you are just lowering your pressure and flow.

[@BEASTProjects]

I removed the stock fuel filter bowel on the side of the engine block. FYI

[@BEASTProjects]

Hi everyone, if you're interested in getting one of these diesel fuel filter kits, go to dieselfuelfilterkits.com & remember, I always include info on the parts discussed or installed in all of the video descriptions. There may even be discount codes occasionally. We appreciate all of you that keep coming back every week! Thank you so much!!! Steve & Heather PS: Tow Mirrors @ 5K (Subs)

[@efortuna1991]

Would this work on a 2020 ram 3500

[@tonyturner779]

oh and get yourself a strap filter wrench. I dont know what it is about these filter but holy crap are they hard to remove by hand. Much easier with a strap filter wrench.

[@paulg444]

great video, thanks so much . but anti seize on the threads .. the injectors will love that.

[@BEASTProjects]

I thought so too, but the instructions called for it & we were very ginger in applying.

[@edwardcarberry1095]

Keeps the dissimilar metals from corroding /oxidizing and Galling!

[@brentmcmahon8188]

And I have a Fleece intank lift pump at idle 21 lbs and hood pull with trailer and drops to 18 lbs and neat part is one pump is hooked to stock wiring and second pump is wired with Fleese wireing harness with relay and fuse so if one goes out you still have 10-11 lbs of lift pump so it will get you home with no harm unless you have a 1000 hp motor you screwed. !!!

[@ryan2546]

Where did you purchase this kit at? Looking to do it on my Cummins

[@BEASTProjects]

It’s in the video description, where there’s always important information. 😊👍🏻

[@AmateurAtBest]

I don't see it...there's a little much stuff there...

[@timothyschneider6071]

puredieselpower.com/dodge-products/ram-cummins-2500-3500-cat-fuel-filter-kit-13cummins.html This should be it, Ryan. By the way big fan of your channel.

[@brentmcmahon8188]

Don’t delete you factory fuel filter Baldwin has filter that is 5 micron and your is 2 micron and you big Baldwin water separator and is also a 5 micron. So don’t delete your stock cartridge when Balwin has 5 micron to use and the water in filter with a light to warn you of water in your fuel or filter . More is better. My 05 3500 5.9 manual and 150K on the clock no smoke on a stock truck !

[@jedlindberg4353]

I know you don't have the BEAST anymore but did you have a seize or gull of the aluminum from the CAT threads and housing threads? I bought the same setup and I had to have it taken off and put in a vise to get the filter off it was bad. I ordered the Baldwin filter head and Baldwin fuel filter and had that put on. Now I am having leakage but that is a Baldwin problem there is no O or D ring for that particular filter but I believe it needs one but that is besides the point. Thank you for your response. I hope you did not have the same problem.

[@BEASTProjects]

We did put a little antiseize on the threads & got scolded by many internet mechanics, however I never had a fueling issue or a problem replacing the filters. I used Baldwin filter too.

[@manny1782]

Does this kit eliminate the filter housing on the engine?

[@JackSmith5770jack]

Do you need to install fuel lift pump? Thank you.

[@BPhotos]

You have a really nice truck. I see it a lot standing at my bus stop on week days in the morning

[@BEASTProjects]

Thanks buddy! 😉

[@billpitman9053]

BLOODv CHIEF z

[@repairvehicle]

Very good combination. Camry and Ram.

[@BASEDacid5150]

Ramry

[@samuelaviles3852]

I put that same system in my ram 3500 and additional the black market in the engine !! question will have any effect that will damage the engine?

[@BEASTProjects]

Nope, you just added even more protection.

[@gabewhisen3446]

Love the BDS my Dodge won't steer right without one anti death wobble apparatus

[@DaltonP2156]

Do I need to put a lift pump on with this or can I run these filters stock

[@mouseprosen]

Does this replace the rear filter? I have a 2012 Dodge Ram 2500 4X4. I just recently purchased a XDP replacement system for my front fuel filter. Dodge wants a lot of money 💰 for their filters and the Cat filter do a much better job

[@BEASTProjects]

I did delete front filter bowl.

[@edwardcarberry1095]

If your getting a sore neck try keeping the windows of your truck closed. For me even in the early summer time. Not going to explain more then that.

[@jaredfreeman8572]

So when installed can we remove the under hood filter?

[@johnm7707]

Is this cat filter suppose to be better than the dual Fass filter system

[@tater0909]

do you have a fass or any kind of pump? if not how does it work without

[@gregbarcenas]

Awesome thinking upgrading to the cat filter I manage a fleet of sending trucks with Cummins and I honestly prefer fleetguard over Baldwin if you’d like to try is filter part number FS20089 fleetguard awesome videos and content

[@BEASTProjects]

Thanks Greg

[@repairvehicle]

Fleetguard is the best, because they even make filters for cat.

[@jsanchez7412]

So this is basically double fuel filtration in the back but you still got the 3rd up front under the hood?

[@BEASTProjects]

I deleted the fuel bowel on the side of the engine block.

[@jsanchez7412]

@@BEASTProjects thank you. discovered that was an option after a little more research. im going to be installing a similar system soon. great video!

[@BEASTProjects]

Thanks for watching, Jay! Merry Christmas

[@747_Captain]

I’ve seen a good amount of your videos, I live down in Bel Air, MD. Recently bought my dream Ram 2500 Cummins 6.7, which shop do you use in PA to do all your work? Wanting to delete my truck and get her tuned to turn it into a “off road, race truck”. I also love your blue/purple powder coat colors, it would go great with the color of my truck. Any shop information you could provide would be a huge help.

[@BEASTProjects]

Congrats on the new truck! No one is deleting them in PA due to the EPA, but if you want to do other modifications & upgrades, Dirty Diesels in Reading, PA.

[@repairvehicle]

Ebay sells delete kits, but you have install it yourself

[@DdDten]

Probably a weird question but I was thinking if you do these mods to your truck then sell it to a dealer or trade in, what happens next? Does the car dealer put back to stock or not look and If a person buys it used and goes to change their filters probably going to be like wtf. Something I’ve been thinking about whenever I do mods to my truck or beware of if I ever look at used vehicle.

[@BEASTProjects]

The dealer didn’t w/ Beast 2.0 & the new owner keeps in contact with me. I always keep a build sheet & everything is video documented. I’m keeping all of my stock parts for all my current builds moving forward.

[@paulholm4827]

Rancor. Put on the micron filter u want to use.

[@jerrypease]

Damnit!! Watched the whole thing and realized this wouldn't work for a 2008... Is there something similar for the earlier 6.7s?

[@BEASTProjects]

I’m sure there is

[@T-Dawg6.7]

Jerry Pease try dieselfuelfilterkits.com

[@justinsnell2216]

Buying a 2015 Dodge Ram 6.7L Cumming 2500 Tradesman 149. Not sure what the 149 means ?, do you by chance know? Only has 38k miles on it so pretty dang new. Should be picking it up this week. Enjoy your videos new subscriber and religious watcher here from now on. Thanks

[@BEASTProjects]

I’m not sure either.

[@tjphaneuf2901]

It might be the wheelbase configuration?

[@heathersmith8998]

What TJ said. It has a 149” wheelbase (look at me earning my new whip 💁🏼‍♀️😂)

[@sslliimmyy]

Justin Snell 149 is the wheelbase length

[@williambrinkman5135]

Just a simple question. What would happened if you just removed the OEM filter from the filter housing after installing this? Would everything work right? I am talking without the delete kit..

[@BEASTProjects]

Probably nothing if you have the CAT filter, but less unneeded crap on the engine is always better in my opinion. Most people run both filters.

[@timspire1059]

The engine won't run without a filter in the housing, per the owners manual.

[@18B_Porta-Poty_PTSD]

BEAST, I’m confused brother... At the end of your video you said there is a ‘part 2’ to this video doing a fuel filter delete. My question is why go through all the trouble upgrading your fuel filter if you plan on deleting the system?

[@BEASTProjects]

No need for 2 filters & the CAT filter is better than OEM. Deleting the fuel bowl also cleaned up the D/S side of the engine.

[@hlehrlich]

Can you use the CAT water separater filter with this like on the FASS systems?

[@petersannicolas8949]

Yea u can

[@60203]

Sick truck! What mounts did you use to mount that rigid radiance bar on the bumper?

[@BEASTProjects]

CJC OffRoad makes a 30” Bumper Bracket.

[@gabewhisen3446]

If you like your injectors prime your new filters with ATF , where did you get your certs

[@Father4ev3r]

You've stumbled upon something Cummins clearly missed in all the Service Manuals for the past 100 yrs.

[@gabewhisen3446]

This comes from real world experience not a book , it's been passed down for generations just passing on the knowledge , use ATF

[@gabewhisen3446]

@@jacobdukes4741 yes dinwit

[@Father4ev3r]

@@gabewhisen3446 Cummins INJECTION PUMP TECH ADVISOR.... "ATF or automatic transmission fluid is designed for exactly that, automatic transmissions. Here are the properties of ATF and effects they have on a diesel engine when mixed with diesel fuel: Emulsifies Water - In a closed system like a transmission any moisture from condensation needs to be absorbed by the ATF to prevent rust from causing damage. In diesel fuel this will cause water to pass through your fuel filter/water separator and enter your fuel injection system. This water will come out of emulsion one the engine has cooled down causing rust in vital fuel injection parts, eventually damaging them. High Flash Point and High Viscosity - A high flash point makes ATF easier to handle without the fear of ignition. Being exposed to temperatures of 200 F, ATF need to remain viscous to protect transmission parts. In diesel fuel this thickens the fuel and results in pour injector atomization. The increased flash point lower the cetane level of the fuel. Both of these characteristics reduce the power and efficiency of the engine and while increasing emissions. A increased level of ash deposits will caused coking of the cylinder and injector nozzle, leading to engine damage over time. Friction Modifiers - Automatic transmission require a level of friction in the fluid for proper operation of the clutches and bands, so friction modifiers are added to the fluid. Friction in fuel injection equipment is bad. Detergents - Since service intervals of transmission fluid is quite long, the fluid contains detergents to clean internal components that may gum up over time. If a fuel system is suffering from varnish build up then these detergents will possible cure the problem but with all the other negatives associated with ATF your best bet is to use a diesel fuel conditioner designed for diesel fuel only."

[@davidcaskey4669]

I always use Lucas to fill my filters

[@sscpd228]

What is the brand of the fuel filter kit.....have been looking for this particular one that you installed and missed the brand name.

[@BEASTProjects]

Hit up Dirty Diesels in PA.

[@alexsayago8555]

how we order the kit?

[@derekbonogofsky1909]

Love the add, I should do that to!

[@SportsRthebest]

Will these filters work on a powerstroke 6.7?

[@RBFR01]

When I wake up in the morning my neck has a throbbing pain but I crack my neck and the pain goes away.

[@allincamo]

So , how often will you change out this new filter...? also make a video if you can when you do and cut open the filter to see how much CRAY it caught. be interesting to see. ps: think wee getting more now soon. :-(

[@BEASTProjects]

Fuel, every 10K now. I’ll take you up on that suggestion.

[@allincamo]

Ram BEAST Projects would be very interesting to see this front filter . I’ll stand by . But I’m itching for a 3500 longbed . Once again !

[@marxvadar2614]

So this kit also makes it so you no longer need/use your lift pump???

[@greygoose628]

X2 on this mod. seems like we have the exact same mods and ideas! I am waiting to see how this works with the fleece filter delete kit seen as how you (and myself) are not running an aftermarket lift pump. You mentioned the fleece in-tank pump (i am leaning towards this) . Will the delete kit need an extra short piece of fuel line to bypass the filter?

[@BEASTProjects]

Coming this Friday.

[@brianjensen2806]

Hey bro. Can you make a update/review video on this set up

[@BEASTProjects]

It’s still working well. Dirty Diesels is still selling a lot of them.

[@brianjensen2806]

BEAST Projects very nice. I will look into that. I have a question for you though that I hoping you may have the answer to do you have an email address I can message you ?

[@BEASTProjects]

yup, it’s on my website. www.allbeastprojects.com

[@traviskorda3262]

Hey Steve just curious, I have the whole kit from Dirty diesels and I'm bout to install. I was looking for their video and cant even find their channel...did they delete their channel or get in trouble or sumthin? Just curious I was subscribed and cant find em in my sub list either!

[@BEASTProjects]

Long story..

[@traviskorda3262]

@@BEASTProjects perhaps could it be shortened to EPA? Just a guess w all the drama lately in the industry

[@BEASTProjects]

No, Josh & Aaron went separate ways. Dirty Diesels & Elite Truck & Off-Road Outfitters is now all Josh. Aaron got the original Dirty Diesels channel & changed it to Standout Specialties.

[@NewmanTractor]

Thanks for all of the the awesome fuel filter tips brother! We just god done building a Cummins 6 for our ag tractor you may be into kzbin.info/www/bejne/l3OrpJ2loraIr7c. Have a great day and keep em coming!

[@Wongigigi]

Channel has grown fast but your mirrors are still stock

[@BEASTProjects]

5K, I have the part # & I’m ready to order!

[@MrKernkraft4000]

How has this worked out since? Thanks

[@BEASTProjects]

Perfectly fine

[@eman1757]

Go to the chiropractor for your neck pain.

[@victorsanchez1983]

why do they call it fillder instead of FILTER ?

[@bleachinuri]

Where the micron ratings for those filters

[@BEASTProjects]

Good question, the CAT filter removes more than 98% of particles 2 microns or larger vs the OEM filter that has a 5 micron outer filter w/ a 3 micron inner filter. For more details on the CAT filter, click here: dieselfuelfilterkits.com/docs/cat_filters.pdf

[@edwardcarberry1095]

Cat's three levels of filters are, Standard, Advanced and Ultra High Efficiency. The 1R-0749 is now 416-1225 filter.

[@repairvehicle]

Microns ratings is not posted on cat website. Resellers post false information to convince people to buy cat filters so that they can make money. Cat filters have no advantages over factory because they are made by fleetguard/cummins.

[@RFJersey]

Love the snow videos.

[@BEASTProjects]

We’ll keep them coming every week! Thanks Rob!

[@normanrichards5143]

What part or kit number is that and where did you get it thanks

[@BEASTProjects]

Info should be in the video description...

[@MrLito1977]

Where is this shop located at.

[@BEASTProjects]

thejpshop.net/

[@JoseMartinez-qn7ty]

Where you get the led bar

[@BEASTProjects]

CJC Off-Road

[@jhenry7406]

Good stuff cat filters are about the only thing catapilar does right

[@efrenhernandez2134]

willis arnald * Caterpillar!

[@ugarcia3823]

spend many years and many miles on the road, I had a CAT pulling my rig all over the country, 0 problems

[@davidcaskey4669]

Just open your wallet when it says CAT on it

[@kixforrest2358]

Sadly the CAT 0750 is not a True Actual 2 micron (Absolute) @ 99% filter - its actually closer to a 4 micron (Absolute) @ 99% - according to the new testing method.

[@walterk1221]

Happily the correct Cummins Filtration (Fleetguard) filter is 3 micron absolute. Why dick around with anything other than OEM?

[@kixforrest2358]

@@walterk1221 Walter can you provide actual Fleetguard (white paper) data showing its 3 micron (absolute) @ 99% efficiency? I can’t find it!

[@hardtruth2039]

Is this something similar to a fass?

[@BEASTProjects]

No, Fass is the lift pump & filters combined.

[@zanefarrar8417]

For sure doing this now. Thank man

[@sslliimmyy]

Can you put these on the chevys?

[@BEASTProjects]

I believe they make a kit for them too. Check out the video description for their website

[@nunayobusiness3384]

So where’s the fleece install video?

[@BEASTProjects]

IT'S DELETED! 6.7 Cummins Fleece Fuel Filter Delete Installation (NO LIFT PUMP) kzbin.info/www/bejne/jnmcn4qlhdSgl80

[@jasonstoltzfus6862]

Another nice mod Steve!

[@BEASTProjects]

Thanks J

[@BEASTProjects]

+rural xcapers Thank you 😊👍🏻

[@jasonstoltzfus6862]

rural xcapers Funny, I had that same rule and yes I broke it and Steve is the first youtuber that I bought merch from.

[@christianweaver8132]

Where do I get the kit? Love it!

[@BEASTProjects]

Easy install, all the info is always in the video description. 👍🏻

[@christianweaver8132]

Ram BEAST Projects sorry I can't seem to find the description with my phone. I'll try it on the computer...

[@BEASTProjects]

dieselfuelfilterkits.com

[@christianweaver8132]

Ram BEAST Projects Thanks!!

[@jggrant8018]

sucks getting old, lol, great video bro

[@BEASTProjects]

RIGHT! Thank you for watching.

[@rojer9542]

Beats the alternative.😊

[@MrRequisition]

If you really want to get serious, plumb a hyd filter on the return line

[@truckcampertraveler7369]

OR A CENTERFUGE

[@indianahoosier7113]

I run all FleetGuards . But Cat Makes good filters ...

[@BEASTProjects]

😉

[@bon-musicgirl5095]

is fleetguard run by a lot of truckers why - dont they also run cat - is cost the reason for fleetguard - or is reason known

[@BEASTProjects]

Everyone has a their preference, both good filters.

[@indianahoosier7113]

Ram BEAST Projects I agree

[@indianahoosier7113]

bon-music girl Im sure they do run cat but everyone has their preference. Both good filters

[@sscpd228]

None of them look like what you installed......unless I am looking in the wrong place

[@atozrecovery518]

I gave you a thumbs up on offtheranch shirt press.

[@BEASTProjects]

I’m seriously going to hit him on that. We’re looking for a new company to do our shirts.

[@arfifteenguy]

Totally did that upgrade 2 weeks ago

[@BEASTProjects]

Great upgrade, stay tuned for the 2nd part next week.

[@arfifteenguy]

Ram BEAST Projects Yeah I'm running a air dog lift pump and a adapter for oem filter housing to fit the same cat filter you just put on. I'm curious how you are going to separate the water without stock filter

[@BEASTProjects]

+AFG New Media I’m still using the stock water separator setup, just replaced that filter with a new Baldwin filter.

[@wildmanofthewynooch7028]

Ilike the Blackmarket Diesel performance after market better this is just to much.

[@Sicktrickintuner]

Baldwin = junk cheap filter. Ever wonder why lots of big trucks run fleetguard only? Plus now you have 3 filters to change.

[@BEASTProjects]

Nope, watch the most recent video. Deleted the OEM filter.

[@apecobbb707]

Fleetgaurd makes much better filters .

[@massive223]

lol the call from work "hey the thing is louder than normal should i look at it?" no shit lmao take some initiative when ur main man isn't there, jesus.

[@toddhefer5809]

God Bless:))

[@ljlaw3124]

You should get an Air Dog

[@BEASTProjects]

I don’t need a lift pump at the moment or maybe not any time soon.

[@Soffex]

Nice downgrade lol

[@InlineFlix]

Dollar store vin diesel

[@muscle24v93]

Yow mirrors 5 k guyssss

[@BEASTProjects]

I have the part number & I’m ready to order!!

[@muscle24v93]

Ram BEAST Projects do you want me to order them for you lol

[@bighuch7998]

Ram BEAST Projects I have a brand new passenger side tow mirror you can have for free power folding heated puddle light. Looks just like the OEM

[@BEASTProjects]

If you want. 🤣 There’s a specific pair that I need.

[@BEASTProjects]

Thanks bro, I have specific pair picked. They are all black & are powered, power folding, heated & memory.

[@markmullins9037]

New subscriber show some love ✌

[@donchico11]

This is the website of the kit. m.dieselfuelfilterkits.com

[@BEASTProjects]

Yup

[@bluec-ledge8296]

get to the point!

[@jamesgrant1713]

Lmao a cat filter is paper...lol your filled with all the hype....

[@nidarmakni4509]

Why did you do this ...save injectors with putting a cheap filter in your car 🤦‍♂️ rtfm ....read the fuckin manual and you dont have problems with your fuel system...

[@BEASTProjects]

Ok, internet mechanic! Merry Christmas !

[@nidarmakni4509]

@@BEASTProjects 😂😂😂 you are the internet machanic ...im working 11 years for cummins 😉 merry Christmas

[@nidarmakni4509]

@@BEASTProjects and baldwin Filters are the shittiest filters you can buy ...

[@wisetow10]

Does the cat filter have a lower micron count than the stock Dodge filter?