BUILDING A GIANT 6 meters RC C-17 Globemaster/ Part 3

[@RamyRC]

I'll see you guys again soon!

[@Qowuw]

ทำคริปต่อไปน้าาอย่าท้อล่ะ❤

[@iammeobviously6815]

The vid: 16 min ago The comment: 18 min ago

[@lStorm_VRl]

Bye!

[@steffanjansenvanvuuren3257]

Thanks Ramy, Merry Christmas and a happy new year to you too.

[@agolftwittler1223]

We will. You are a true master of your trade 👍

[@ChillyBilly78]

@RammyRC I am a C-17 production supervisor at Robins Air Force base. We work with Boeing to provide scheduled maintenance on the C-17. We are only about an hour and a half drive from where Tyler Perry lives. Would love to see about getting yall a tour and maybe bring the plane down for some photo ops against the real thing.

[@donanders2110]

I hope they see this, it would be EPIC!!!!!

[@juniorlopez2767]

@RammyRC

[@richardaragona880]

Hey Ramy, this offer is worth the trip!

[@williamschmidt8944]

@Ramy RC

[@MV2024WDC]

I had a chance to fly the C-17 sim in QLD australia as I work for Boeing with the P-8A simulators. It’s such an amazing aircraft. This content is incredible!

[@flymachine]

I’ve said this so many times but I can’t believe my eyes when I consider your earliest videos building foam board airliners on your floor to this cutting edge behemoth, you really are the most incredible example of progress and achieving your dreams on all of KZbin - I am honoured to have watched your growth - many happy landings.

[@VisionCommunications]

I was thinking the same thing as a longtime viewer!

[@badbilly1083]

I’ve never flown an r/c plane in my life, but I could watch you build them for hours!

[@randylahey2242]

you can get into it pretty cheap and easy these days

[@Paiadakine]

@@randylahey2242 Agreed, @Badbilly, if you stop by a close by RC club I bet they have a learn to fly program. If not find someone you see flying RC planes and get to know them. 90% of of the questions when earning how to stet-up and fly an RC airplane can be answered in a few minutes by an experienced RC guy.

[@00000.o]

A flight simulator with a two stick control box as apposed to keyboard and mouse can give you the 'feel' of RC flight. Mishaps are easier to deal with also!

[@mrlately7253]

So satisfying

[@Germanavgeek_7]

If you live im germany you can come to the airfield i fly ad and we can do some flying

[@DugWagner]

I'm scratchbuilding a 76" Sikorsky S-39 flying boat, but I stopped what I was doing to watch this video. It is a huge jolt of inspiration to get back to work! Thank you!

[@wollm1325]

It doesn’t matter how big the build. Ramy is still a true artist of modern materials. I love watching these videos

[@P51]

Ramy you're a true craftsman! I think Tyler deserves a C-17 with leading-edge devices, and you're just the man for the job.

[@donanders2110]

Leading edge slats would be epic!

[@JossWhittle]

I love seeing how Tyler has become such a prolific patron for your art. Really incredible work as always, Ramy.

[@chanzeyuan]

I waited so long for it. Such great videos can't be found elsewhere. Good work, Ramy!

[@olivia-x6y]

I've been watching all your videos. Sometimes will fall asleep on them (great way to relax) This latest project is mind blowing and look forward to the next videos on it.

[@Paiadakine]

The engineering/CAD that is involved is underappreciated. The composite craftsmanship is fantastic.

[@colinboneham7387]

The C17 is looking great & she will come together quickly now, it’s crazy that’s 5 wks of work & another 4/5 to go till finished. To you I say “have a great Christmas” Ramy and all your viewer too.

[@fromthecrypt3836]

I wish I had a friend like you. I would come hang out and just watch you do what you do.I am amazed by how you create these amazing models. Great job. Brings me joy To watch you create. K

[@michaelhall9339]

Be sure to use personal protective gear (breathing protection) when working with fiberglass. Excellent workmanship guys

[@Vipcioo]

Thank you for sharing the result of your great work on the model. By the way... Have you ever thought about using templates to process profiles? What I mean is the finishing of the profile, i.e. rounding the "nose". Looking at the data in the profile database, their shape is precisely defined. This means - in theory - better profile properties could be achieved. Because from what I see, you do everything "by eye".

[@StéphaneDelecraz]

congratulation and merry christmas

[@hth4802]

Ramy, Been subbed for years, man you are like the most advance aircraft builder on the planet by now Ramy, talking about stepping up your game, For real bro , you building with advance materials, Heavy influenced with our latest tooling, Composites, 3D printers, really custom tooling- like the big wire cutter made fromextruded rails, your a damn mini Lockheed Skunkworks bro - I'm surprised militaries and governments have not scooped you up by now, lol. For real Ramy, Mad respect , Bro , Way to Grind!!

[@yannick_12]

Dear Ramy, let me just say that your work is an absolute beauty!! Your skills are out of this world and it's a pleasure to watch you building these huge rc planes, being a real inspiration for me. It's super cool that there are new ramy rc videos pretty frequently in the last weeks, and I think I'm speaking for a lot of your fans😍 Being following you since your 777 built, I'm always looking forward to your upcoming projects. I hope you enjoy your Christmas holidays and am curious to see the next video! Greetings from Munich😎

[@retiredtom1654]

Very enjoyable videos. I hope the pilot is well trained and prepared for flying this machine.

[@NeilStansbury]

I love many things about your videos, but most of all I enjoy watching your "composite materials" journey

[@emeryrushmo]

Tyler Perry found RAMY RC!!! How great to have found RAMY!!!! This is right in my NERDIE wheelhouse! CHEERS!!!!

[@benshakespeare268]

Happy holidays Ramy! Love to watch you build with such craftsmanship. The plane is already epic! So Tyler better be airlifting a couple RC tanks in this thing next year :D

[@kennethmcdonald2952]

Ramy you are such and inspiration as a 28 year master builder and competitive pilot. I am going to build a 20ft xb-70 valkyrie here soon. I wish i could chat with you some time about the build. Keep up the amazing work my friend.

[@frede4u]

Cutting flaps out with a tracksaw is epic!! Can´t wait to see this thing fly. You guy's are awesome!

[@pjmacgregor]

That was really neat. How did they get that scalloped edge though?

[@747_Captain]

The attention to detail and craftsmanship is amazing as always.

[@TheEarthIsAwesome]

Wow, you are absolutely the most talented (I guess to call you modeler) I have ever seen. Most likely one of the best in the world. Your work is amazing and I enjoy watching the process!

[@jayhouse3149]

Meticulous, precision and zero tolerance craftmanship - we enjoy watching you work!

[@wangpie8840]

I have been working on the actual C17 for 8 years now and this is amazing work, I cant wait to see the finished product.

[@dallasc.hunteriii490]

Steller achievent and remarkable talent that surpasses anything that I have ever seen in RC Plane building!

[@tonyf9076]

Who remembers Ramy's 1st project all that time ago ? Look where we are now...wow 👍❤️

[@Urboyfromfuture]

Watching your video after many years. I used to spent hours watching your videos back then . I'm really impressed with the foam idea. It's very easy compared to making 3d printed moulds.

[@РинатБагаутдинов-с4б]

Hello Rami! For good radio communication with the aircraft with a carbon body, do not forget to install an external antenna. Carbon, being a conductor, significantly impairs radio transmission.

[@Magoo71]

Never seen you videos before as I'm a Mt Bike guy...but I use to fly RC planes for almost 20 years....Expensive hobby but one where you learn real quickly what todo and not to do...Can't wait to see it all built for the first flight!

[@mtms42000]

Artist, Craftsman and engineer. Amazing work!

[@kiwiengineer]

This is so good. What an amazing plane. The attention to detail and craftsmanship. Awesome.

[@Tompoule]

Master at work, great Job Rami

[@brianvalliere552]

Absolutely incredible engineering and work! I’m sure like any job it has its moments but I can’t imagine getting paid to do this every day. Can’t be very many “bad” days

[@aga080]

you work at an extremely professional level samy i love it

[@alejandrocastro211]

a lot of design in the concept and the process. Really cool to watch

[@RANGER73CPT]

Happy holidays to you, Sir. Be safe and see you next year. It is very nice to watch how you work and see the finished products, they are EXACTLY as I would expect from a master craftsman.

[@Jays_rcgarage]

I cannot wait to see this in the air 👏🏼

[@sirpuntalot1282]

Watching your channel since a while. From smaller scale to bigger and bigger.... Now you sit on the wings.... Won't take too long until you sit inside the plane you built ;) Always amazing to watch the way you build stuff.

[@snower13]

Not many people have your skill and work ethic. This thing is going to be so cool.

[@pstarkey001]

@RamyRC you make it look so easy! Can't wait to see it finished. Merry Christmas and happy holidays to you too!!!

[@andymuzzo8568]

Mate. It’s going to be amazing to see that in the air. Can’t wait. Awesome work

[@AJHewson1]

One of your best videos yet. The timing of the Timelapse and shot selection perfectly showed each step with great clarity. Epic project too!

[@Noksus]

You're slowly working your way up to full scale aircraft!

[@timothymattson3680]

I race hydroplanes and I saw a guy use carbon fiber instead of extruded Aluminum for a turn Fin (basically a vertical winglet ) After a wreck with other boat , it cut like a bandsaw ,not changing depth, whereas the usual 6” Alum would cut less and less with each batton. Just don’t fly near anybody. Beautiful work , love the use of plugs for layout. When 747 was 1 st built, we got a Large foam model from a Boeing engineer. When we threw it at a playground, it was deceiving how far it was going while in flight. Then it would touch down and be 100-150 yards away.

[@OGcaptainRich]

This plane is HUGE

[@glinksted]

Same to you Ramy, and all your team. Great build as always, looks immense!

[@MattyCrayon]

Awesome craftsmanship! Have a wonderful Christmas holiday time with your family.

[@mogsyman]

Season’s Greetings Ramy to you and your family. Thanks for the videos uploaded in 2023, looking forward to your channel in 2024.

[@jbjuggler]

What amazing skill you have in building your planes!

[@theleveluniverse]

I take my eyes off the channel for moment and he's already doing another project! It's incredible that you have the opportunity to do something that you love, keep it up!❤

[@pilotjdb]

Would be interesting to see a cockpit fpv view of these planes flying! Basically a camera inside the cockpit that moves depending on where you look.

[@andrewcouchman25]

Nice idea

[@vmas29]

"Head-traking fpv fly" is what you're looking for..nice idea

[@Decadence1]

I totally agree, I dreamed about this years ago. Fpv head tracking in a large rc cargo plane

[@noname-kh7sg]

@@vmas29 having 2 of that for both pilot and co-pilot would be great to watch

[@ЕвгенияЛарикова-я7ц]

Can you get for me files 3d toprint mould for a350 and can i buy this files

[@FPVQuadModz]

Incredible craftsmanship my friend. I love watching your projects come together. Happy holidays!

[@evandroamd]

simply fantastic, a true work of art. Congratulations on the beautiful work.

[@michelbrown1060]

Wow what a stupendus work. . . .True crators of flying art. . .the first flight will be awesome. . .

[@charlesblithfield6182]

Ramy: It’s cool watching you work seeing confidence in actions like dremmel cutting coming from experience. I would take 10x longer to do anything.

[@ravebrave8866]

wow what a thumb image... looks fantastic...

[@palco22]

Always a joy to witness such talent. Merry Christmas to you and your family and friends. Please be safe and till next year !

[@MeqaLa]

It'll be nice to see the first flight. You've done a good job.

[@mithrandir1313]

if you use peel ply as the surface layer, then you will have fewer bubble holes/pin holes to fill.... peel up the peel ply and it sands pretty smooth..

[@axmama2034]

Realmente é fantástico esse projeto! Parabéns pelo trabalho perfeito...

[@Travel_of_Stunning]

Great job..👍 marry christmas & happy new year ramy..from singapore

[@LukeRichardson1981]

Incredible work! Amazing how strong those wings are given what they're made of!

[@armageddon87]

have been following your channel for a few builds now... finally i know what i feel maybe the next step up you can consider doing for your RCs, hope you dont feel offended 1, when you see commercial passenger airplanes landing, they extent that flaps and make larger wing areas, however i think such details can be considered for future large planes? 2, the joints movements? can the servers joints be internalised? larger planes if the joints are internal instead of having am external hinge will be so so awesome. 3, will you consider to cut open the cockpit? and maybe setup a camera room? so you can turn your RC into a AR plane? imagine having a video of the A380 but from the pilot's perspective... that will be damn cool. 4, will you consider a fuel jet engine for RC instead of battery operated? hope my above christmas "wishlist" will be the next step for this channel... the best RC modeller youtuber in the industry, lets push the boundary and make it better!!!!!

[@jkingsley5671]

You and your team are artists and artisans! Incredible seeing what you make. Happy Holidays and safe travels!

[@ShrimplyAquascaping]

Amaxing effort into making the wing, it looks so cool, I can't wait for it to fly

[@davidhewson8605]

Just thanks guys . Superlative craftsmanship!. Dave

[@HAMlLTON]

I’m so happy that you get to supplement your income while also getting to use some cool tools in a purpose built facility

[@valentincastelo6798]

your school taught you well. that is amazing engineering skills.

[@ayrwynharrison898]

Your work is fantastic it is great to see you working on such an awesome project. I hope you have the best Christmas and New year's ever! I wish Tyler and all of your team a great Christmas and New year. I look forward to seeing the work on the C-17 Continue in January. Cheers!

[@fivestar2227]

That thang is bad ass! Cant wait to see more progress / first flight.

[@ezonigs3107]

congratulation Ramy. This is a really speedy build for its size. I loved the show of the negative-g test when you two sat on the wings. Amazing. I love you too. You are my inspiration.😍❤❤

[@alexjones9339]

Hello from Russia, excellent work. With such a size, it was probably possible to hide the mechanization of the wing in the wing

[@kcaKamakazi]

Your work is incredilbly impressive!

[@epicboi3213]

I am not new to your videos, but now that I have started studying mechanical engineering, I understand more and more what you do. It's amazing! Those hinges are beautiful. Your wings are so incredibly strong. I aspire to build RC planes like you in the future (but smaller and not as good of course :D), or at least fly some for a hobby. Great work man I am mesmerised by your videos

[@mikedimaio1237]

Just amazing work and to do it in 5 weeks is beyond impressive.

[@motorTranz]

Beautiful craftsmanship ! Thank you for sharing this!

[@RockbeThyName]

WOW Remi this is just crazy!! Your rc planes just get bigger and bigger... You'll be climbing in and riding your next project!

[@peterjohnston1224]

What? Nooooo - January? I am amazed at the work you do and can hardly wait for the next vid on this project. I am enthralled by your craftsmanship and attention to detail.

[@av8tore71]

Ramy its been iver a year since I watched any of your video so I have to say you are getting bigger and better. This C-17 is going to be awesome once you are finished. On a side note, my son in law is going through school to learn to fly this type of aircraft. He wants C-17 but more than likely he will be in the C-130 as he has to go where the USAF needs him at as its the needs of the USAF

[@iskoos]

Subscribed. This channel deserves nothing less. 👍

[@brbk4498]

The fact that you guys can sit on the wings that is crazy. Can’t wait for the next video. Dang last video for the year. Enjoy your holidays see you next year

[@RTheSingleHanded]

I currently do maintenance on C-17s and I am super impressed, keep up the vids!

[@FotoCreatives]

Happy Holidays Ramy and thank you for sharing all of your hard work! Always a pleasure to watch.

[@davidjester5085]

Wow! It has come a long way since we were down there. Looks awesome brother! Can't wait to see it completed.

[@antoniog9814]

Ramy, your work is fantastic! I love watching you create these airplanes. The amount of work and detail is exceptional!

[@KienDLuu]

very nice build. Some eye protection would when cutting carbon fibre is essential dude.

[@VIctorCarruyo]

Hat off, always extremely impressed by your work.

[@jeanchristianmpamo9372]

I love how you make this projects perfectly with patients,anyway Merry Christmas🎉Enjoy.❤

[@kbaifa]

What would the world do without people like you. So damn cool bro and you can tell you don’t even know how cool you are

[@bradkerr2798]

Amazing build. With the wet layup, peelply and bagging, fully outfitted shop and being conscious of excess resin weight, what is the reason for weighted double negative molds instead of vacuum bagging? Especially for the flat parts?

[@Knee-ko]

Project is coming along nicely. Looking super-strong and can't wait to see her fly. Thanks for all your great videos this year Ramy. Enjoy your Christmas and NY celebrations. 👍👍

[@randallfawc7501]

Loving watching this amazing project! Great work!

[@DerMaje]

You‘ve gone a long way to this point, mein Freund. Keep up the good work. Can‘t wait to see it in the the air. Drück dir die Daumen. 👍🏻

[@3rdDog173]

This is so amazing thing you guys do... Keep it moving baby!....

[@abundantharmony]

Still not to a million subs? That makes no sense at all bro. You deserve it. You are the BEST.

[@alanp9156]

CNC hot wire! I remember using a homemade manual version my dad made with a wire & a scalextric transformer to cut blue foam wings for R/C models back in the 70s !!